[Sun Dec 18 02:16:39 2011] Detection parameters:
  Position = (262.3, 463.9) = 6 23 28.03 -64 22 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.4 +/- 13.0
  Background counts = 6.9
  Rate = 0.01 +/- 0.001

[Sun Dec 18 02:16:39 2011] Off-axis axis estimate = 12.28'
[Sun Dec 18 02:54:50 2011] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 02:54:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 02:54:50 2011] Initial guess for spatial extent in simple fitting = 12.57"
[Sun Dec 18 02:54:50 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.914
[Sun Dec 18 02:54:50 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.57"
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 18 03:16:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 18 03:16:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 03:16:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 18 03:16:36 2011] Fit fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 03:16:47 2011] Spatial fit model total counts = 131.999000, observed total counts = 132.000000
[Sun Dec 18 03:16:47 2011] Offset between fit and detection position for source 8 = 0.252051 pixels
[Sun Dec 18 03:16:47 2011] 132.586600 total counts/ 74.488900 bgd. counts: snr = 6.731520
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.252051 pixels
  Position = (262.0, 463.9) = 6 23 28.21 -64 22 39.9
  Extent = 4.4 (3.4-5.4)", rotation angle = 0
  Source counts = 58.1 +/- 11.5
  Background counts = 74.5
  Rate = 0.007 +/- 0.001
[Sun Dec 18 03:16:47 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:16:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:16:47 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 03:16:47 2011] Source does appear to be extended
[Sun Dec 18 03:16:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 03:54:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:54:25 2011] Initial guess for spatial extent in simple fitting = 4.38"
[Sun Dec 18 03:54:25 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.992
[Sun Dec 18 03:54:25 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.38"
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 18 04:11:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 18 04:11:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 04:11:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 18 04:11:36 2011] Fit fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 18 04:11:45 2011] Spatial fit model total counts = 121.136000, observed total counts = 121.000000
[Sun Dec 18 04:11:45 2011] Offset between fit and detection position for source 8 = 0.009730 pixels
[Sun Dec 18 04:11:45 2011] 121.862300 total counts/ 63.864300 bgd. counts: snr = 7.257448
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.009730 pixels
  Position = (262.0, 463.9) = 6 23 28.21 -64 22 39.9
  Extent = 4.3 (3.5-5.5)", rotation angle = 0
  Source counts = 58.0 +/- 11.0
  Background counts = 63.9
  Rate = 0.007 +/- 0.001
[Sun Dec 18 04:11:45 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:11:45 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 04:11:45 2011] Source does appear to be extended
[Sun Dec 18 04:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 05:28:02 2011] XMMSAS src. selection expression = ellipse(22747.726420, 40311.923460, 255.896407, 255.896407, 0.000000, X, Y)
[Sun Dec 18 05:28:02 2011] Writing source region out to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src8_src.reg
[Sun Dec 18 05:28:02 2011] Extracting stamp from image fullrun_mos2_xmm0103860101_pi300-10000_cl_sm2.00.img.gz, (247, 449) - (277, 479)
[Sun Dec 18 05:28:02 2011] XMMSAS bgd. selection expression = annulus(22747.726420, 40311.923460, 426.494012, 852.988025, X, Y)
[Sun Dec 18 05:28:02 2011] Writing fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src8.gif
[Sun Dec 18 05:29:24 2011] Mean detx,y = (2316.34, -16325.19) 
[Sun Dec 18 05:29:27 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 05:29:38 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 05:29:38 2011] Setting source spectrum file to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Dec 18 05:29:38 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Dec 18 05:35:58 2011] Not generating rmf since there are only 57 counts
[Sun Dec 18 05:35:58 2011] rmf not generated due to insufficient counts
[Sun Dec 18 05:36:22 2011] Updating aperture counts using extracted products
[Sun Dec 18 05:36:22 2011] Error reading totcts from fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Dec 18 05:36:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 05:36:22 2011] Using photon index=1.80, rate=0.00685, arf fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src8.arf
[Sun Dec 18 05:36:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 05:36:22 2011] Updating source flux to 2.8e-13
[Sun Dec 18 05:36:45 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting