[Sun Dec 18 02:16:39 2011] Detection parameters:
  Position = (176.4, 363.2) = 6 24 26.01 -64 29 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.5 +/- 13.7
  Background counts = 9.0
  Rate = 0.02 +/- 0.003

[Sun Dec 18 02:16:39 2011] Off-axis axis estimate = 10.02'
[Sun Dec 18 02:54:50 2011] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 02:54:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 02:54:50 2011] Initial guess for spatial extent in simple fitting = 11.44"
[Sun Dec 18 02:54:50 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Sun Dec 18 02:54:50 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.44"
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Dec 18 03:16:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src2.csv
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Dec 18 03:16:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src2.csv
[Sun Dec 18 03:16:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Dec 18 03:16:36 2011] Fit fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Dec 18 03:16:47 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.421125 pixels away
[Sun Dec 18 03:16:47 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:16:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:16:47 2011] Assessing source extent using major
[Sun Dec 18 03:16:47 2011] Source does appear to be extended
[Sun Dec 18 03:16:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 03:54:25 2011] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:54:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 03:54:25 2011] Initial guess for spatial extent in simple fitting = 11.44"
[Sun Dec 18 03:54:25 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Sun Dec 18 03:54:25 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.44"
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Dec 18 04:11:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src2.csv
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Dec 18 04:11:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src2.csv
[Sun Dec 18 04:11:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Dec 18 04:11:36 2011] Fit fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Dec 18 04:11:45 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.269483 pixels away
[Sun Dec 18 04:11:45 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:11:45 2011] Assessing source extent using major
[Sun Dec 18 04:11:45 2011] Source does appear to be extended
[Sun Dec 18 04:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 05:28:02 2011] XMMSAS src. selection expression = ellipse(15295.116089, 31546.707062, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 05:28:02 2011] Writing source region out to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src2_src.reg
[Sun Dec 18 05:28:02 2011] Extracting stamp from image fullrun_mos2_xmm0103860101_pi300-10000_cl_sm2.00.img.gz, (139, 326) - (214, 401)
[Sun Dec 18 05:28:02 2011] XMMSAS bgd. selection expression = annulus(15295.116089, 31546.707062, 1087.500000, 2175.000000, X, Y) && !ellipse(14113.448837, 30903.858093, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 05:28:02 2011] Writing fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src2.gif
[Sun Dec 18 05:29:01 2011] Mean detx,y = (-7374.41, -10080.10) 
[Sun Dec 18 05:29:03 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 05:29:19 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 05:29:20 2011] Setting source spectrum file to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 18 05:29:20 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Dec 18 05:35:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 05:35:54 2011] rmf not generated due to insufficient counts
[Sun Dec 18 05:36:22 2011] Updating aperture counts using extracted products
[Sun Dec 18 05:36:22 2011] Error reading totcts from fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 18 05:36:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 05:36:22 2011] Using photon index=1.80, rate=0.0237, arf fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src2.arf
[Sun Dec 18 05:36:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 05:36:22 2011] Updating source flux to 4.5e-13
[Sun Dec 18 05:36:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting