[Sun Dec 18 02:16:39 2011] Detection parameters:
  Position = (292.6, 275.3) = 6 23 7.72 -64 36 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7750.6 +/- 103.8
  Background counts = 15.2
  Rate = 0.9 +/- 0.01

[Sun Dec 18 02:16:39 2011] Off-axis axis estimate = 1.73'
[Sun Dec 18 02:54:50 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 02:54:50 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Dec 18 02:54:50 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sun Dec 18 02:54:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 03:16:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 03:16:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 03:16:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 03:16:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 03:16:36 2011] Fit fullrun_mos2_xmm0103860101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 03:16:47 2011] Source 1 is offset by 7.326582 and 5.973768 pixels which is larger than
2 X fitted extent = 0.838455 x 0.838455, not incorporating fit results
[Sun Dec 18 03:16:47 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 03:16:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 03:16:47 2011] Assessing source extent using major
[Sun Dec 18 03:16:47 2011] Source does appear to be extended
[Sun Dec 18 03:16:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 03:54:25 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:54:25 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Dec 18 03:54:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sun Dec 18 03:54:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 04:11:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 04:11:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 04:11:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 04:11:36 2011] fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 04:11:36 2011] Fit fullrun_mos2_xmm0103860101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 04:11:45 2011] Spatial fit model total counts = 6566.990000, observed total counts = 6567.000000
[Sun Dec 18 04:11:45 2011] Offset between fit and detection position for source 1 = 0.170940 pixels
[Sun Dec 18 04:11:45 2011] 6621.140000 total counts/ 1301.940000 bgd. counts: snr = 147.418109
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.170940 pixels
  Position = (292.6, 275.4) = 6 23 7.73 -64 36 19.8
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 5319.2 +/- 81.4
  Background counts = 1301.9
  Rate = 0.6 +/- 0.01
[Sun Dec 18 04:11:45 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:11:45 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 04:11:45 2011] Source does appear to be extended
[Sun Dec 18 04:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 05:28:02 2011] Counts = 5319.200000, rescaling region sizes by 2.000000
[Sun Dec 18 05:28:02 2011] XMMSAS src. selection expression = ellipse(25408.306200, 23914.487200, 663.306019, 663.306019, 0.000000, X, Y)
[Sun Dec 18 05:28:02 2011] Writing source region out to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 18 05:28:02 2011] Extracting stamp from image fullrun_mos2_xmm0103860101_pi300-10000_cl_sm2.00.img.gz, (254, 237) - (331, 314)
[Sun Dec 18 05:28:02 2011] XMMSAS bgd. selection expression = annulus(25408.306200, 23914.487200, 2211.020064, 4422.040127, X, Y)
[Sun Dec 18 05:28:02 2011] Writing fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1.gif
[Sun Dec 18 05:28:06 2011] Mean detx,y = (131.73, 138.47) 
[Sun Dec 18 05:28:08 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 05:28:56 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 05:28:57 2011] Setting source spectrum file to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 05:28:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 18 05:36:22 2011] Updating aperture counts using extracted products
[Sun Dec 18 05:36:22 2011] Error reading totcts from fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 05:36:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 05:36:22 2011] Using photon index=1.80, rate=0.628, arf fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 05:36:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 05:36:22 2011] Updating source flux to 6.9e-12
[Sun Dec 18 05:36:45 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Dec 18 05:37:04 2011] Reading fit data from xmm0103860101/analysis//spectral/fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 18 05:37:04 2011] Spectral fit parameter nH value = 4.66868e+19
[Sun Dec 18 05:37:04 2011] Spectral fit parameter PhoIndex value = 2.00951
[Sun Dec 18 05:37:04 2011] Failed to get F(0.3-8.0) from xmm0103860101/analysis//spectral/fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 18 05:37:04 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 05:37:04 2011] Using Nh = 4.7e+19, photon index=2.01, rate=0.628, arf fullrun_mos2_xmm0103860101_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 05:37:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 05:37:04 2011] Updating source flux to 6.4e-12