[Thu May 24 12:55:53 2012] Detection parameters:
  Position = (280.1, 283.2) = 22 17 12.19 14 14 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10398.1 +/- 123.5
  Background counts = 176.5
  Rate = 0.4 +/- 0.004

[Thu May 24 12:55:54 2012] Off-axis axis estimate = 1.73'
[Thu May 24 13:00:02 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:00:02 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 24 13:00:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu May 24 13:00:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu May 24 13:23:15 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 13:23:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_src1.csv
[Thu May 24 13:23:15 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 13:23:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_src1.csv
[Thu May 24 13:23:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:23:15 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 13:23:15 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 13:23:15 2012] Fit fullrun_pn_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 13:56:13 2012] Spatial fit model total counts = 2657.020000, observed total counts = 2648.000000
[Thu May 24 13:56:13 2012] Offset between fit and detection position for source 1 = 0.168396 pixels
[Thu May 24 13:56:13 2012] 2664.522000 total counts/ 680.912000 bgd. counts: snr = 76.017012
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.168396 pixels
  Position = (280.0, 283.4) = 22 17 12.21 14 14 21.0
  Extent = 6.2 (5.9-6.4)", rotation angle = 0
  Source counts = 1983.6 +/- 51.6
  Background counts = 680.9
  Rate = 0.4 +/- 0.01
[Thu May 24 13:56:13 2012] Vigneting correction estimate = 1.000000
[Thu May 24 13:56:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 13:56:13 2012] Assessing source extent using major axis lower bound
[Thu May 24 13:56:13 2012] Source does appear to be extended
[Thu May 24 13:56:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 13:56:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 13:56:23 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Thu May 24 13:56:23 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.086
[Thu May 24 13:56:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.17"
[Thu May 24 14:19:54 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 14:19:54 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 14:19:54 2012] Fit fullrun_pn_xmm0103660301_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu May 24 14:19:54 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 14:19:55 2012] fullrun_pn_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 14:19:55 2012] Fit fullrun_pn_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 14:45:51 2012] Spatial fit model total counts = 2657.010000, observed total counts = 2648.000000
[Thu May 24 14:45:51 2012] Offset between fit and detection position for source 1 = 0.000013 pixels
[Thu May 24 14:45:51 2012] 2664.523000 total counts/ 680.713000 bgd. counts: snr = 76.035788
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000013 pixels
  Position = (280.0, 283.4) = 22 17 12.21 14 14 21.0
  Extent = 6.2 (5.9-6.4)", rotation angle = 0
  Source counts = 1983.8 +/- 51.6
  Background counts = 680.7
  Rate = 0.4 +/- 0.01
[Thu May 24 14:45:51 2012] Vigneting correction estimate = 1.000000
[Thu May 24 14:45:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 14:45:51 2012] Assessing source extent using major axis lower bound
[Thu May 24 14:45:51 2012] Source does appear to be extended
[Thu May 24 14:45:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 14:46:01 2012] Counts = 1983.810000, rescaling region sizes by 2.000000
[Thu May 24 14:46:01 2012] XMMSAS src. selection expression = ellipse(24314.844440, 24603.133600, 740.892021, 740.892021, 0.000000, X, Y)
[Thu May 24 14:46:01 2012] Writing source region out to fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1_src.reg
[Thu May 24 14:46:01 2012] Extracting stamp from image fullrun_pn_xmm0103660301_pi300-10000_cl_sm2.00.img.gz, (237, 241) - (323, 326)
[Thu May 24 14:46:01 2012] XMMSAS bgd. selection expression = annulus(24314.844440, 24603.133600, 2469.640071, 4939.280142, X, Y) && !ellipse(29593.508209, 28241.477020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24348.904600, 27612.299840, 625.142418, 625.142418, 0.000000, X, Y) && !ellipse(29405.181671, 21639.779861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21532.984640, 19598.789600, 345.164810, 345.164810, 0.000000, X, Y)
[Thu May 24 14:46:01 2012] Writing fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1.gif
[Thu May 24 14:46:06 2012] Mean detx,y = (153.22, -198.21) 
[Thu May 24 14:46:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 14:47:54 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 14:47:54 2012] Setting source spectrum file to fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 14:47:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 24 15:36:06 2012] Updating aperture counts using extracted products
[Thu May 24 15:36:06 2012] Error reading totcts from fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 15:36:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 15:36:07 2012] Using photon index=1.80, rate=0.372, arf fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1.arf
[Thu May 24 15:36:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 15:36:07 2012] Updating source flux to 8.7e-13
[Thu May 24 15:37:49 2012] Reading fit data from xmm0103660301/analysis//spectral/fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 24 15:37:49 2012] Spectral fit parameter nH value = 2.49491e+12
[Thu May 24 15:37:49 2012] Spectral fit parameter PhoIndex value = 0.583133
[Thu May 24 15:37:49 2012] Failed to get F(0.3-8.0) from xmm0103660301/analysis//spectral/fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 24 15:37:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 15:37:49 2012] Using Nh = 2.5e+12, photon index=0.58, rate=0.372, arf fullrun_pn_xmm0103660301_pi300-10000_pass1_cl_src1.arf
[Thu May 24 15:37:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 15:37:49 2012] Updating source flux to 2e-12