[Thu May 24 12:56:37 2012] Detection parameters:
  Position = (340.9, 325.8) = 22 16 54.01 14 17 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.8 +/- 24.3
  Background counts = 98.5
  Rate = 0.01 +/- 0.0008

[Thu May 24 12:56:37 2012] Off-axis axis estimate = 3.66'
[Thu May 24 13:40:43 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:40:43 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu May 24 13:40:43 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.086
[Thu May 24 13:40:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.26"
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 24 13:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src3.csv
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 24 13:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src3.csv
[Thu May 24 13:56:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 24 13:56:09 2012] Fit fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 24 13:56:17 2012] Spatial fit model total counts = 487.000000, observed total counts = 487.000000
[Thu May 24 13:56:17 2012] Offset between fit and detection position for source 5 = 0.410792 pixels
[Thu May 24 13:56:17 2012] 483.047000 total counts/ 377.760000 bgd. counts: snr = 5.417099
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.410792 pixels
  Position = (340.9, 325.4) = 22 16 54.01 14 17 23.9
  Extent = 5.1 (4.0-6.2)", rotation angle = 0
  Source counts = 105.3 +/- 22.0
  Background counts = 377.8
  Rate = 0.005 +/- 0.001
[Thu May 24 13:56:17 2012] Vigneting correction estimate = 1.000000
[Thu May 24 13:56:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 13:56:17 2012] Assessing source extent using major axis lower bound
[Thu May 24 13:56:17 2012] Source does appear to be extended
[Thu May 24 13:56:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 14:35:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 14:35:26 2012] Initial guess for spatial extent in simple fitting = 5.10"
[Thu May 24 14:35:26 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.071
[Thu May 24 14:35:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.10"
[Thu May 24 14:45:48 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 24 14:45:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src3.csv
[Thu May 24 14:45:48 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 24 14:45:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src3.csv
[Thu May 24 14:45:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 14:45:48 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 24 14:45:48 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 24 14:45:48 2012] Fit fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 24 14:45:54 2012] Spatial fit model total counts = 466.999000, observed total counts = 467.000000
[Thu May 24 14:45:54 2012] Offset between fit and detection position for source 5 = 0.010261 pixels
[Thu May 24 14:45:54 2012] 463.344000 total counts/ 354.388000 bgd. counts: snr = 5.787775
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.010261 pixels
  Position = (340.9, 325.4) = 22 16 54.01 14 17 23.9
  Extent = 5.2 (4.1-6.3)", rotation angle = 0
  Source counts = 109.0 +/- 21.5
  Background counts = 354.4
  Rate = 0.005 +/- 0.001
[Thu May 24 14:45:54 2012] Vigneting correction estimate = 1.000000
[Thu May 24 14:45:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 14:45:54 2012] Assessing source extent using major axis lower bound
[Thu May 24 14:45:54 2012] Source does appear to be extended
[Thu May 24 14:45:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:19:04 2012] XMMSAS src. selection expression = ellipse(29608.035300, 28262.390600, 313.883409, 313.883409, 0.000000, X, Y)
[Thu May 24 15:19:04 2012] Writing source region out to fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src5_src.reg
[Thu May 24 15:19:04 2012] Extracting stamp from image fullrun_mos2_xmm0103660301_pi300-10000_cl_sm2.00.img.gz, (323, 307) - (359, 343)
[Thu May 24 15:19:04 2012] XMMSAS bgd. selection expression = annulus(29608.035300, 28262.390600, 523.139015, 1046.278030, X, Y)
[Thu May 24 15:19:04 2012] Writing fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src5.gif
[Thu May 24 15:19:48 2012] Mean detx,y = (4149.85, -4852.27) 
[Thu May 24 15:19:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 15:19:57 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 15:19:58 2012] Setting source spectrum file to fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 24 15:19:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 24 15:36:09 2012] Updating aperture counts using extracted products
[Thu May 24 15:36:09 2012] Error reading totcts from fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 24 15:36:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 15:36:10 2012] Using photon index=1.80, rate=0.00546, arf fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src5.arf
[Thu May 24 15:36:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 15:36:10 2012] Updating source flux to 8.1e-14