[Thu May 24 12:56:37 2012] Detection parameters:
  Position = (280.2, 283.2) = 22 17 12.17 14 14 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6529.9 +/- 97.0
  Background counts = 108.9
  Rate = 0.2 +/- 0.003

[Thu May 24 12:56:37 2012] Off-axis axis estimate = 1.72'
[Thu May 24 13:40:43 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:40:43 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 24 13:40:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu May 24 13:40:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 13:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src1.csv
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 13:56:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src1.csv
[Thu May 24 13:56:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 13:56:09 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 13:56:09 2012] Fit fullrun_mos2_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 13:56:17 2012] Spatial fit model total counts = 3744.190000, observed total counts = 3561.000000
[Thu May 24 13:56:17 2012] Offset between fit and detection position for source 1 = 0.173150 pixels
[Thu May 24 13:56:17 2012] 3735.390000 total counts/ 1214.750000 bgd. counts: snr = 72.321491
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.173150 pixels
  Position = (280.2, 283.4) = 22 17 12.17 14 14 21.3
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2520.6 +/- 61.1
  Background counts = 1214.8
  Rate = 0.1 +/- 0.003
[Thu May 24 13:56:17 2012] Vigneting correction estimate = 1.000000
[Thu May 24 13:56:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 13:56:17 2012] Assessing source extent using major axis lower bound
[Thu May 24 13:56:17 2012] Source does appear to be extended
[Thu May 24 13:56:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 14:35:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 14:35:26 2012] Initial guess for spatial extent in simple fitting = 5.09"
[Thu May 24 14:35:26 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.806
[Thu May 24 14:35:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.09"
[Thu May 24 14:45:47 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 14:45:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src1.csv
[Thu May 24 14:45:47 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 14:45:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src1.csv
[Thu May 24 14:45:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 14:45:48 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 14:45:48 2012] fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 14:45:48 2012] Fit fullrun_mos2_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 14:45:54 2012] Spatial fit model total counts = 3744.190000, observed total counts = 3561.000000
[Thu May 24 14:45:54 2012] Offset between fit and detection position for source 1 = 0.000001 pixels
[Thu May 24 14:45:54 2012] 3735.390000 total counts/ 1214.760000 bgd. counts: snr = 72.320906
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000001 pixels
  Position = (280.2, 283.4) = 22 17 12.17 14 14 21.3
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2520.6 +/- 61.1
  Background counts = 1214.8
  Rate = 0.1 +/- 0.003
[Thu May 24 14:45:54 2012] Vigneting correction estimate = 1.000000
[Thu May 24 14:45:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 14:45:54 2012] Assessing source extent using major axis lower bound
[Thu May 24 14:45:54 2012] Source does appear to be extended
[Thu May 24 14:45:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:19:04 2012] Counts = 2520.630000, rescaling region sizes by 2.000000
[Thu May 24 15:19:04 2012] XMMSAS src. selection expression = ellipse(24327.937600, 24608.587400, 610.976418, 610.976418, 0.000000, X, Y)
[Thu May 24 15:19:04 2012] Writing source region out to fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1_src.reg
[Thu May 24 15:19:04 2012] Extracting stamp from image fullrun_mos2_xmm0103660301_pi300-10000_cl_sm2.00.img.gz, (245, 248) - (315, 319)
[Thu May 24 15:19:04 2012] XMMSAS bgd. selection expression = annulus(24327.937600, 24608.587400, 2036.588059, 4073.176117, X, Y) && !ellipse(24438.882996, 27604.052277, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 15:19:04 2012] Writing fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1.gif
[Thu May 24 15:19:07 2012] Mean detx,y = (8.15, 55.62) 
[Thu May 24 15:19:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 15:19:21 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 15:19:21 2012] Setting source spectrum file to fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 15:19:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 24 15:36:09 2012] Updating aperture counts using extracted products
[Thu May 24 15:36:09 2012] Error reading totcts from fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 15:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 15:36:09 2012] Using photon index=1.80, rate=0.126, arf fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1.arf
[Thu May 24 15:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 15:36:09 2012] Updating source flux to 1.3e-12
[Thu May 24 15:37:33 2012] Reading fit data from xmm0103660301/analysis//spectral/fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 24 15:37:33 2012] Spectral fit parameter nH value = 6.85759e+13
[Thu May 24 15:37:33 2012] Spectral fit parameter PhoIndex value = 0.394134
[Thu May 24 15:37:33 2012] Failed to get F(0.3-8.0) from xmm0103660301/analysis//spectral/fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 24 15:37:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 15:37:33 2012] Using Nh = 6.9e+13, photon index=0.39, rate=0.126, arf fullrun_mos2_xmm0103660301_pi300-10000_pass1_cl_src1.arf
[Thu May 24 15:37:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 15:37:33 2012] Updating source flux to 2.8e-12