[Thu May 24 12:56:17 2012] Detection parameters:
  Position = (341.0, 325.7) = 22 16 53.98 14 17 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.3 +/- 23.1
  Background counts = 95.5
  Rate = 0.009 +/- 0.0009

[Thu May 24 12:56:17 2012] Off-axis axis estimate = 3.66'
[Thu May 24 13:23:16 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:23:16 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu May 24 13:23:16 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Thu May 24 13:23:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.26"
[Thu May 24 13:40:42 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 24 13:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_src3.csv
[Thu May 24 13:40:42 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 24 13:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_src3.csv
[Thu May 24 13:40:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:40:42 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 24 13:40:42 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 24 13:40:42 2012] Fit fullrun_mos1_xmm0103660301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 24 13:56:15 2012] Source 3 is offset by 7.487558 and 6.242821 pixels which is larger than
2 X fitted extent = 0.963218 x 0.963218, not incorporating fit results
[Thu May 24 13:56:15 2012] Vigneting correction estimate = 1.000000
[Thu May 24 13:56:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 13:56:15 2012] Assessing source extent using major
[Thu May 24 13:56:15 2012] Source does appear to be extended
[Thu May 24 13:56:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 14:19:55 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu May 24 14:19:55 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu May 24 14:19:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Thu May 24 14:19:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.26"
[Thu May 24 14:35:26 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 24 14:35:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_src3.csv
[Thu May 24 14:35:26 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 24 14:35:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_src3.csv
[Thu May 24 14:35:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 14:35:26 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 24 14:35:26 2012] fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 24 14:35:26 2012] Fit fullrun_mos1_xmm0103660301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 24 14:45:53 2012] Source 3 is offset by 7.488316 and 6.243625 pixels which is larger than
2 X fitted extent = 0.963219 x 0.963219, not incorporating fit results
[Thu May 24 14:45:53 2012] Vigneting correction estimate = 1.000000
[Thu May 24 14:45:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 14:45:53 2012] Assessing source extent using major
[Thu May 24 14:45:53 2012] Source does appear to be extended
[Thu May 24 14:45:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:04:14 2012] XMMSAS src. selection expression = ellipse(29615.717529, 28285.805389, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 15:04:14 2012] Writing source region out to fullrun_mos1_xmm0103660301_pi300-10000_pass1_cl_src3_src.reg
[Thu May 24 15:04:14 2012] Extracting stamp from image fullrun_mos1_xmm0103660301_pi300-10000_cl_sm2.00.img.gz, (303, 288) - (378, 363)
[Thu May 24 15:04:14 2012] XMMSAS bgd. selection expression = annulus(29615.717529, 28285.805389, 1087.500000, 2175.000000, X, Y)
[Thu May 24 15:04:14 2012] Writing fullrun_mos1_xmm0103660301_pi300-10000_pass1_cl_src3.gif
[Thu May 24 15:04:50 2012] Mean detx,y = (-4641.31, -4317.23) 
[Thu May 24 15:04:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 15:05:18 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 15:05:18 2012] Setting source spectrum file to fullrun_mos1_xmm0103660301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 15:05:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103660301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 24 15:17:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 24 15:17:47 2012] rmf not generated due to insufficient counts
[Thu May 24 15:36:08 2012] Updating aperture counts using extracted products
[Thu May 24 15:36:08 2012] Error reading totcts from fullrun_mos1_xmm0103660301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 15:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 15:36:09 2012] Using photon index=1.80, rate=0.00914, arf fullrun_mos1_xmm0103660301_pi300-10000_pass1_cl_src3.arf
[Thu May 24 15:36:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 15:36:09 2012] Updating source flux to 1.1e-13
[Thu May 24 15:36:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting