[Wed Aug 15 20:28:56 2012] Detection parameters:
  Position = (289.6, 276.2) = 8 47 42.62 34 45 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44399.6 +/- 246.1
  Background counts = 41.6
  Rate = 2 +/- 0.01

[Wed Aug 15 20:28:56 2012] Off-axis axis estimate = 1.74'
[Wed Aug 15 21:48:41 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 21:48:41 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Aug 15 21:48:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Wed Aug 15 21:48:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Aug 15 22:26:24 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 22:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 22:26:24 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 22:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 22:26:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 22:26:24 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 22:26:24 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 22:26:24 2012] Fit fullrun_mos2_xmm0103660201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 15 22:26:35 2012] Spatial fit model total counts = 34089.100000, observed total counts = 33424.000000
[Wed Aug 15 22:26:35 2012] Offset between fit and detection position for source 1 = 0.110455 pixels
[Wed Aug 15 22:26:35 2012] 34228.830000 total counts/ 7211.030000 bgd. counts: snr = 318.164215
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.110455 pixels
  Position = (289.6, 276.3) = 8 47 42.61 34 45 4.6
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 27017.8 +/- 185.0
  Background counts = 7211.0
  Rate = 1 +/- 0.009
[Wed Aug 15 22:26:35 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 22:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 22:26:35 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 22:26:35 2012] Source does appear to be extended
[Wed Aug 15 22:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 23:44:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 23:44:46 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Wed Aug 15 23:44:46 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.954
[Wed Aug 15 23:44:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Thu Aug 16 00:28:47 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 16 00:28:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 00:28:47 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 16 00:28:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 00:28:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 00:28:47 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 16 00:28:47 2012] fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 16 00:28:47 2012] Fit fullrun_mos2_xmm0103660201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 16 00:28:57 2012] Spatial fit model total counts = 34118.000000, observed total counts = 33424.000000
[Thu Aug 16 00:28:57 2012] Offset between fit and detection position for source 1 = 0.000276 pixels
[Thu Aug 16 00:28:57 2012] 34259.530000 total counts/ 7217.030000 bgd. counts: snr = 318.322680
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000276 pixels
  Position = (289.6, 276.3) = 8 47 42.61 34 45 4.6
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 27042.5 +/- 185.1
  Background counts = 7217.0
  Rate = 1 +/- 0.009
[Thu Aug 16 00:28:57 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 00:28:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 00:28:57 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 00:28:57 2012] Source does appear to be extended
[Thu Aug 16 00:28:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:18:51 2012] Counts = 27042.500000, rescaling region sizes by 3.000000
[Thu Aug 16 02:18:51 2012] XMMSAS src. selection expression = ellipse(25150.860400, 23985.648600, 997.052429, 997.052429, 0.000000, X, Y)
[Thu Aug 16 02:18:51 2012] Writing source region out to fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 16 02:18:51 2012] Extracting stamp from image fullrun_mos2_xmm0103660201_pi300-10000_cl_sm2.00.img.gz, (232, 219) - (347, 334)
[Thu Aug 16 02:18:51 2012] XMMSAS bgd. selection expression = annulus(25150.860400, 23985.648600, 4985.262143, 9970.524287, X, Y) && !ellipse(24354.994690, 24371.214264, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 02:18:51 2012] Writing fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1.gif
[Thu Aug 16 02:18:56 2012] Mean detx,y = (-48.34, 25.47) 
[Thu Aug 16 02:18:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 02:21:54 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 02:21:54 2012] Setting source spectrum file to fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 02:21:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 16 02:26:37 2012] Updating aperture counts using extracted products
[Thu Aug 16 02:26:37 2012] Error reading totcts from fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 02:26:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:26:37 2012] Using photon index=1.80, rate=1.35, arf fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 02:26:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:26:37 2012] Updating source flux to 1.4e-11
[Thu Aug 16 02:27:23 2012] Reading fit data from xmm0103660201/analysis//spectral/fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug 16 02:27:23 2012] Spectral fit parameter nH value = 1.67628e+14
[Thu Aug 16 02:27:23 2012] Spectral fit parameter PhoIndex value = 2.39991
[Thu Aug 16 02:27:23 2012] Failed to get F(0.3-8.0) from xmm0103660201/analysis//spectral/fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 02:27:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 02:27:23 2012] Using Nh = 1.7e+14, photon index=2.40, rate=1.35, arf fullrun_mos2_xmm0103660201_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 02:27:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 02:27:23 2012] Updating source flux to 1.1e-11