[Wed Jun 13 01:19:29 2012] Detection parameters:
  Position = (188.2, 351.6) = 23 52 18.27 -33 50 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 16.6
  Background counts = 99.8
  Rate = 0.001 +/- 0.0003

[Wed Jun 13 01:19:30 2012] Off-axis axis estimate = 8.87'
[Wed Jun 13 01:25:02 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 01:25:02 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Jun 13 01:25:02 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Wed Jun 13 01:25:02 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.87"
[Wed Jun 13 02:09:03 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jun 13 02:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_src27.csv
[Wed Jun 13 02:09:03 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jun 13 02:09:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_src27.csv
[Wed Jun 13 02:09:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 02:09:03 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jun 13 02:09:03 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jun 13 02:09:03 2012] Fit fullrun_pn_xmm0103461101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Jun 13 02:46:35 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.702051 pixels away
[Wed Jun 13 02:46:35 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 02:46:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 02:46:35 2012] Assessing source extent using major
[Wed Jun 13 02:46:35 2012] Source does appear to be extended
[Wed Jun 13 02:46:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 02:46:49 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 02:46:49 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Jun 13 02:46:49 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Wed Jun 13 02:46:49 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.87"
[Wed Jun 13 03:30:12 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 13 03:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_src27.csv
[Wed Jun 13 03:30:12 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 13 03:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_src27.csv
[Wed Jun 13 03:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 03:30:12 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 13 03:30:12 2012] fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 13 03:30:12 2012] Fit fullrun_pn_xmm0103461101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Jun 13 03:59:54 2012] Spatial fit model total counts = 913.988000, observed total counts = 914.000000
[Wed Jun 13 03:59:54 2012] Offset between fit and detection position for source 41 = 1.207677 pixels
[Wed Jun 13 03:59:54 2012] 917.121300 total counts/ 828.630000 bgd. counts: snr = 3.074116
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.207677 pixels
  Position = (187.0, 351.3) = 23 52 18.68 -33 50 22.6
  Extent = 8.1 (5.5-11.5)", rotation angle = 0
  Source counts = 88.5 +/- 30.3
  Background counts = 828.6
  Rate = 0.002 +/- 0.0008
[Wed Jun 13 03:59:54 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 03:59:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 03:59:54 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 03:59:54 2012] Source does appear to be extended
[Wed Jun 13 03:59:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 04:00:07 2012] XMMSAS src. selection expression = ellipse(16224.301800, 30517.919800, 485.007614, 485.007614, 0.000000, X, Y)
[Wed Jun 13 04:00:07 2012] Writing source region out to fullrun_pn_xmm0103461101_pi300-10000_pass1_cl_src41_src.reg
[Wed Jun 13 04:00:07 2012] Extracting stamp from image fullrun_pn_xmm0103461101_pi300-10000_cl_sm2.00.img.gz, (159, 323) - (215, 379)
[Wed Jun 13 04:00:07 2012] XMMSAS bgd. selection expression = annulus(16224.301800, 30517.919800, 808.346023, 1616.692047, X, Y) && !ellipse(14274.779037, 32301.324799, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 04:00:07 2012] Writing fullrun_pn_xmm0103461101_pi300-10000_pass1_cl_src41.gif
[Wed Jun 13 04:38:46 2012] Mean detx,y = (-3651.58, 5829.97) 
[Wed Jun 13 04:38:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 04:39:15 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 04:39:15 2012] Setting source spectrum file to fullrun_pn_xmm0103461101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Jun 13 04:39:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103461101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Jun 13 05:07:46 2012] Not generating rmf since there are only 88 counts
[Wed Jun 13 05:07:46 2012] rmf not generated due to insufficient counts
[Wed Jun 13 05:43:52 2012] Updating aperture counts using extracted products
[Wed Jun 13 05:43:52 2012] Error reading totcts from fullrun_pn_xmm0103461101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Jun 13 05:43:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 05:43:53 2012] Using photon index=1.80, rate=0.0022, arf fullrun_pn_xmm0103461101_pi300-10000_pass1_cl_src41.arf
[Wed Jun 13 05:43:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 05:43:53 2012] Updating source flux to 1.4e-14
[Wed Jun 13 05:44:25 2012] Source 41 has fewer than 100.000000 counts, skipping spectral fitting