[Sat Jun  2 18:14:22 2012] Detection parameters:
  Position = (341.3, 310.9) = 16 16 48.61 12 26 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.7 +/- 20.4
  Background counts = 16.3
  Rate = 0.03 +/- 0.002

[Sat Jun  2 18:14:22 2012] Off-axis axis estimate = 3.23'
[Sat Jun  2 18:15:52 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 18:15:52 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sat Jun  2 18:15:52 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Sat Jun  2 18:15:52 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.05"
[Sat Jun  2 18:43:26 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  2 18:43:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_src6.csv
[Sat Jun  2 18:43:26 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  2 18:43:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_src6.csv
[Sat Jun  2 18:43:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 18:43:26 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  2 18:43:26 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  2 18:43:26 2012] Fit fullrun_pn_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jun  2 19:18:45 2012] Spatial fit model total counts = 414.075000, observed total counts = 413.000000
[Sat Jun  2 19:18:45 2012] Offset between fit and detection position for source 6 = 0.189814 pixels
[Sat Jun  2 19:18:45 2012] 413.422000 total counts/ 231.641000 bgd. counts: snr = 11.943752
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.189814 pixels
  Position = (341.1, 310.9) = 16 16 48.67 12 26 52.8
  Extent = 5.3 (4.6-6.1)", rotation angle = 0
  Source counts = 181.8 +/- 20.3
  Background counts = 231.6
  Rate = 0.02 +/- 0.002
[Sat Jun  2 19:18:45 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 19:18:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 19:18:45 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 19:18:45 2012] Source does appear to be extended
[Sat Jun  2 19:18:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 19:18:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  2 19:18:58 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Sat Jun  2 19:18:58 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.353
[Sat Jun  2 19:18:58 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.31"
[Sat Jun  2 19:46:40 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun  2 19:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_src5.csv
[Sat Jun  2 19:46:40 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun  2 19:46:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_src5.csv
[Sat Jun  2 19:46:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 19:46:40 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun  2 19:46:40 2012] fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun  2 19:46:40 2012] Fit fullrun_pn_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun  2 20:22:34 2012] Spatial fit model total counts = 414.757000, observed total counts = 413.000000
[Sat Jun  2 20:22:34 2012] Offset between fit and detection position for source 6 = 0.005822 pixels
[Sat Jun  2 20:22:34 2012] 414.098000 total counts/ 232.351000 bgd. counts: snr = 11.923259
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.005822 pixels
  Position = (341.1, 310.9) = 16 16 48.67 12 26 52.8
  Extent = 5.3 (4.6-6.2)", rotation angle = 0
  Source counts = 181.7 +/- 20.3
  Background counts = 232.4
  Rate = 0.02 +/- 0.002
[Sat Jun  2 20:22:34 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 20:22:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 20:22:34 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 20:22:34 2012] Source does appear to be extended
[Sat Jun  2 20:22:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 20:22:46 2012] XMMSAS src. selection expression = ellipse(29625.492960, 26998.051200, 316.372209, 316.372209, 0.000000, X, Y)
[Sat Jun  2 20:22:46 2012] Writing source region out to fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun  2 20:22:46 2012] Extracting stamp from image fullrun_pn_xmm0103460901_pi300-10000_cl_sm2.00.img.gz, (323, 293) - (359, 329)
[Sat Jun  2 20:22:46 2012] XMMSAS bgd. selection expression = annulus(29625.492960, 26998.051200, 527.287015, 1054.574030, X, Y)
[Sat Jun  2 20:22:46 2012] Writing fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6.gif
[Sat Jun  2 20:24:44 2012] Mean detx,y = (-4785.71, 445.96) 
[Sat Jun  2 20:24:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 20:24:58 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 20:24:58 2012] Setting source spectrum file to fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  2 20:24:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun  2 20:49:53 2012] Updating aperture counts using extracted products
[Sat Jun  2 20:49:53 2012] Error reading totcts from fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun  2 20:49:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 20:49:53 2012] Using photon index=1.80, rate=0.0151, arf fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6.arf
[Sat Jun  2 20:49:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 20:49:53 2012] Updating source flux to 6.1e-14
[Sat Jun  2 20:50:08 2012] Reading fit data from xmm0103460901/analysis//spectral/fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6_pl.csv
[Sat Jun  2 20:50:08 2012] Spectral fit parameter nH value = 3.42893e+21
[Sat Jun  2 20:50:08 2012] Spectral fit parameter PhoIndex value = 3.99784
[Sat Jun  2 20:50:08 2012] Failed to get F(0.3-8.0) from xmm0103460901/analysis//spectral/fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 20:50:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 20:50:08 2012] Using Nh = 3.4e+21, photon index=4.00, rate=0.0151, arf fullrun_pn_xmm0103460901_pi300-10000_pass1_cl_src6.arf
[Sat Jun  2 20:50:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 20:50:08 2012] Updating source flux to 4.2e-14