[Sat Jun  2 18:14:59 2012] Detection parameters:
  Position = (165.8, 177.0) = 16 17 40.69 12 17 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.1 +/- 7.2
  Background counts = 4.9
  Rate = 0.002 +/- 0.0005

[Sat Jun  2 18:14:59 2012] Off-axis axis estimate = 13.04'
[Sat Jun  2 19:00:13 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 19:00:13 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Sat Jun  2 19:00:13 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.869
[Sat Jun  2 19:00:13 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.95"
[Sat Jun  2 19:18:40 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun  2 19:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_src13.csv
[Sat Jun  2 19:18:40 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun  2 19:18:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_src13.csv
[Sat Jun  2 19:18:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 19:18:40 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun  2 19:18:40 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun  2 19:18:40 2012] Fit fullrun_mos2_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Jun  2 19:18:50 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.950065 pixels away
[Sat Jun  2 19:18:50 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 19:18:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 19:18:50 2012] Assessing source extent using major
[Sat Jun  2 19:18:50 2012] Source does appear to be extended
[Sat Jun  2 19:18:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 20:02:59 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 20:02:59 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Sat Jun  2 20:02:59 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.869
[Sat Jun  2 20:02:59 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.95"
[Sat Jun  2 20:22:29 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_src13.ximg exists
[Sat Jun  2 20:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_src13.csv
[Sat Jun  2 20:22:29 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Jun  2 20:22:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_src13.csv
[Sat Jun  2 20:22:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 20:22:29 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Jun  2 20:22:29 2012] fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jun  2 20:22:29 2012] Fit fullrun_mos2_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jun  2 20:22:39 2012] Spatial fit model total counts = 82.606700, observed total counts = 80.000000
[Sat Jun  2 20:22:39 2012] Offset between fit and detection position for source 14 = 0.059570 pixels
[Sat Jun  2 20:22:39 2012] 84.492000 total counts/ 66.059700 bgd. counts: snr = 2.267834
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.059570 pixels
  Position = (165.8, 177.1) = 16 17 40.68 12 17 10.5
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 18.4 +/- 9.2
  Background counts = 66.1
  Rate = 0.001 +/- 0.0006
[Sat Jun  2 20:22:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 20:22:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 20:22:39 2012] Assessing source extent using major
[Sat Jun  2 20:22:39 2012] Source does appear to be extended
[Sat Jun  2 20:22:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 20:44:03 2012] XMMSAS src. selection expression = ellipse(14379.951600, 15355.302200, 194.206206, 194.206206, 0.000000, X, Y)
[Sat Jun  2 20:44:03 2012] Writing source region out to fullrun_mos2_xmm0103460901_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun  2 20:44:03 2012] Extracting stamp from image fullrun_mos2_xmm0103460901_pi300-10000_cl_sm2.00.img.gz, (155, 166) - (177, 188)
[Sat Jun  2 20:44:03 2012] XMMSAS bgd. selection expression = annulus(14379.951600, 15355.302200, 323.677009, 647.354019, X, Y)
[Sat Jun  2 20:44:03 2012] Writing fullrun_mos2_xmm0103460901_pi300-10000_pass1_cl_src14.gif
[Sat Jun  2 20:47:06 2012] Mean detx,y = (-14142.60, 1465.40) 
[Sat Jun  2 20:47:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 20:47:14 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 20:47:14 2012] Setting source spectrum file to fullrun_mos2_xmm0103460901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun  2 20:47:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103460901_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun  2 20:49:10 2012] Not generating rmf since there are only 18 counts
[Sat Jun  2 20:49:10 2012] rmf not generated due to insufficient counts
[Sat Jun  2 20:49:54 2012] Updating aperture counts using extracted products
[Sat Jun  2 20:49:54 2012] Error reading totcts from fullrun_mos2_xmm0103460901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun  2 20:49:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 20:49:54 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos2_xmm0103460901_pi300-10000_pass1_cl_src14.arf
[Sat Jun  2 20:49:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 20:49:54 2012] Updating source flux to 5.3e-14
[Sat Jun  2 20:49:56 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  2 20:49:57 2012] xmm0103460901/analysis//spectral/fullrun_mos2_xmm0103460901_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete