[Sat Jun  2 18:14:41 2012] Detection parameters:
  Position = (318.0, 182.9) = 16 16 55.51 12 17 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.2 +/- 8.5
  Background counts = 5.0
  Rate = 0.004 +/- 0.0009

[Sat Jun  2 18:14:41 2012] Off-axis axis estimate = 8.50'
[Sat Jun  2 18:43:26 2012] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 18:43:26 2012] Initial guess for spatial extent in simple fitting = 10.68"
[Sat Jun  2 18:43:26 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.031
[Sat Jun  2 18:43:26 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.68"
[Sat Jun  2 19:00:12 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun  2 19:00:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_src5.csv
[Sat Jun  2 19:00:12 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun  2 19:00:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_src5.csv
[Sat Jun  2 19:00:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 19:00:13 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun  2 19:00:13 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun  2 19:00:13 2012] Fit fullrun_mos1_xmm0103460901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun  2 19:18:47 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.115164 pixels away
[Sat Jun  2 19:18:47 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 19:18:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 19:18:47 2012] Assessing source extent using major
[Sat Jun  2 19:18:47 2012] Source does appear to be extended
[Sat Jun  2 19:18:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 19:46:41 2012] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 19:46:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  2 19:46:41 2012] Initial guess for spatial extent in simple fitting = 10.68"
[Sat Jun  2 19:46:41 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.031
[Sat Jun  2 19:46:41 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.68"
[Sat Jun  2 20:02:58 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun  2 20:02:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_src5.csv
[Sat Jun  2 20:02:58 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun  2 20:02:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_src5.csv
[Sat Jun  2 20:02:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 20:02:58 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun  2 20:02:58 2012] fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun  2 20:02:58 2012] Fit fullrun_mos1_xmm0103460901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun  2 20:22:36 2012] Spatial fit model total counts = 94.842600, observed total counts = 91.000000
[Sat Jun  2 20:22:36 2012] Offset between fit and detection position for source 11 = 0.266826 pixels
[Sat Jun  2 20:22:36 2012] 96.412400 total counts/ 50.077800 bgd. counts: snr = 6.547610
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.266826 pixels
  Position = (317.8, 182.8) = 16 16 55.58 12 17 35.5
  Extent = 9.3 (5.7-13.0)", rotation angle = 0
  Source counts = 46.3 +/- 9.8
  Background counts = 50.1
  Rate = 0.003 +/- 0.0007
[Sat Jun  2 20:22:36 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 20:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 20:22:36 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 20:22:36 2012] Source does appear to be extended
[Sat Jun  2 20:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 20:40:39 2012] XMMSAS src. selection expression = ellipse(27599.574220, 15851.824800, 558.737416, 558.737416, 0.000000, X, Y)
[Sat Jun  2 20:40:39 2012] Writing source region out to fullrun_mos1_xmm0103460901_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun  2 20:40:39 2012] Extracting stamp from image fullrun_mos1_xmm0103460901_pi300-10000_cl_sm2.00.img.gz, (286, 151) - (350, 215)
[Sat Jun  2 20:40:39 2012] XMMSAS bgd. selection expression = annulus(27599.574220, 15851.824800, 931.229027, 1862.458054, X, Y)
[Sat Jun  2 20:40:39 2012] Writing fullrun_mos1_xmm0103460901_pi300-10000_pass1_cl_src11.gif
[Sat Jun  2 20:41:33 2012] Mean detx,y = (8098.61, 2405.43) 
[Sat Jun  2 20:41:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 20:41:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 20:41:47 2012] Setting source spectrum file to fullrun_mos1_xmm0103460901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun  2 20:41:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103460901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun  2 20:43:28 2012] Not generating rmf since there are only 46 counts
[Sat Jun  2 20:43:28 2012] rmf not generated due to insufficient counts
[Sat Jun  2 20:49:53 2012] Updating aperture counts using extracted products
[Sat Jun  2 20:49:53 2012] Error reading totcts from fullrun_mos1_xmm0103460901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun  2 20:49:53 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 20:49:53 2012] Using photon index=1.80, rate=0.00321, arf fullrun_mos1_xmm0103460901_pi300-10000_pass1_cl_src11.arf
[Sat Jun  2 20:49:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 20:49:53 2012] Updating source flux to 4.8e-14
[Sat Jun  2 20:49:55 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  2 20:49:56 2012] xmm0103460901/analysis//spectral/fullrun_mos1_xmm0103460901_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete