[Fri Aug 17 06:50:23 2012] Detection parameters:
  Position = (445.5, 342.2) = 16 15 44.10 12 17 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.2 +/- 10.8
  Background counts = 3.6
  Rate = 0.006 +/- 0.0008

[Fri Aug 17 06:50:23 2012] Off-axis axis estimate = 11.13'
[Fri Aug 17 07:22:13 2012] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 07:22:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 07:22:13 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Fri Aug 17 07:22:13 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.990
[Fri Aug 17 07:22:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.99"
[Fri Aug 17 07:34:58 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 17 07:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 07:34:58 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 17 07:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_src3.csv
[Fri Aug 17 07:34:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 07:34:59 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 17 07:34:59 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 17 07:34:59 2012] Fit fullrun_mos2_xmm0103460801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 17 07:35:07 2012] Spatial fit model total counts = 112.802000, observed total counts = 113.000000
[Fri Aug 17 07:35:07 2012] Offset between fit and detection position for source 3 = 0.361672 pixels
[Fri Aug 17 07:35:07 2012] 111.663200 total counts/ 65.712400 bgd. counts: snr = 5.668516
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.361672 pixels
  Position = (445.2, 342.3) = 16 15 44.19 12 17 10.7
  Extent = 4.0 (3.1-5.5)", rotation angle = 0
  Source counts = 46.0 +/- 10.6
  Background counts = 65.7
  Rate = 0.003 +/- 0.0008
[Fri Aug 17 07:35:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 07:35:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 07:35:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 07:35:07 2012] Source does appear to be extended
[Fri Aug 17 07:35:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 08:06:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 08:06:28 2012] Initial guess for spatial extent in simple fitting = 4.03"
[Fri Aug 17 08:06:28 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.106
[Fri Aug 17 08:06:28 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.03"
[Fri Aug 17 08:17:26 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 17 08:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 08:17:26 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 17 08:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_src3.csv
[Fri Aug 17 08:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 08:17:26 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 17 08:17:26 2012] fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 17 08:17:26 2012] Fit fullrun_mos2_xmm0103460801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 17 08:17:34 2012] Spatial fit model total counts = 107.892000, observed total counts = 108.000000
[Fri Aug 17 08:17:34 2012] Offset between fit and detection position for source 3 = 0.040639 pixels
[Fri Aug 17 08:17:34 2012] 106.985200 total counts/ 62.446200 bgd. counts: snr = 5.636214
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.040639 pixels
  Position = (445.2, 342.4) = 16 15 44.20 12 17 10.8
  Extent = 3.9 (3.0-5.2)", rotation angle = 0
  Source counts = 44.5 +/- 10.3
  Background counts = 62.4
  Rate = 0.003 +/- 0.0008
[Fri Aug 17 08:17:34 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 08:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 08:17:34 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 08:17:34 2012] Source does appear to be extended
[Fri Aug 17 08:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 08:38:23 2012] XMMSAS src. selection expression = ellipse(38683.201120, 29736.851200, 231.226207, 231.226207, 0.000000, X, Y)
[Fri Aug 17 08:38:23 2012] Writing source region out to fullrun_mos2_xmm0103460801_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 17 08:38:23 2012] Extracting stamp from image fullrun_mos2_xmm0103460801_pi300-10000_cl_sm2.00.img.gz, (432, 329) - (458, 356)
[Fri Aug 17 08:38:23 2012] XMMSAS bgd. selection expression = annulus(38683.201120, 29736.851200, 385.377011, 770.754022, X, Y)
[Fri Aug 17 08:38:23 2012] Writing fullrun_mos2_xmm0103460801_pi300-10000_pass1_cl_src3.gif
[Fri Aug 17 08:38:39 2012] Mean detx,y = (14104.42, 1700.40) 
[Fri Aug 17 08:38:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 08:38:44 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 08:38:44 2012] Setting source spectrum file to fullrun_mos2_xmm0103460801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 08:38:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103460801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 17 08:40:01 2012] Not generating rmf since there are only 44 counts
[Fri Aug 17 08:40:01 2012] rmf not generated due to insufficient counts
[Fri Aug 17 08:40:50 2012] Updating aperture counts using extracted products
[Fri Aug 17 08:40:50 2012] Error reading totcts from fullrun_mos2_xmm0103460801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 08:40:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 08:40:50 2012] Using photon index=1.80, rate=0.00338, arf fullrun_mos2_xmm0103460801_pi300-10000_pass1_cl_src3.arf
[Fri Aug 17 08:40:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 08:40:50 2012] Updating source flux to 1.4e-13
[Fri Aug 17 08:40:54 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 17 08:40:55 2012] xmm0103460801/analysis//spectral/fullrun_mos2_xmm0103460801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete