[Sun Jul 15 08:07:00 2012] Detection parameters: Position = (184.5, 372.5) = 5 43 41.34 23 35 52.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 19.4 +/- 5.9 Background counts = 2.4 Rate = 0.004 +/- 0.001 [Sun Jul 15 08:07:00 2012] Off-axis axis estimate = 9.85' [Sun Jul 15 08:10:30 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting [Sun Jul 15 08:10:30 2012] Initial guess for spatial extent in simple fitting = 11.36" [Sun Jul 15 08:10:30 2012] source mask rpix=2.6, npix_max = 38, mask sum = 49, frac = 1.266 [Sun Jul 15 08:10:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.36" [Sun Jul 15 08:15:37 2012] fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_src3.ximg exists [Sun Jul 15 08:15:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_src3.csv [Sun Jul 15 08:15:37 2012] fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_src3_1.ximg exists [Sun Jul 15 08:15:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_src3.csv [Sun Jul 15 08:15:37 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jul 15 08:15:37 2012] fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sun Jul 15 08:15:37 2012] fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sun Jul 15 08:15:37 2012] Fit fullrun_mos1_xmm0103262801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Sun Jul 15 08:18:25 2012] Spatial fit model total counts = 52.164200, observed total counts = 52.000000 [Sun Jul 15 08:18:25 2012] Offset between fit and detection position for source 1 = 0.513003 pixels [Sun Jul 15 08:18:25 2012] 51.246280 total counts/ 44.318400 bgd. counts: snr = 1.040659 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.513003 pixels Position = (184.8, 373.0) = 5 43 41.26 23 35 52.6 Extent = 2.8" x 2.8", rotation angle = 0 Source counts = 6.9 +/- 7.2 Background counts = 44.3 Rate = 0.0009 +/- 0.0009 Deleting source due to low Poisson probability