[Fri May 25 02:36:28 2012] Detection parameters:
  Position = (266.6, 160.0) = 18 1 6.42 -25 0 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.0 +/- 28.3
  Background counts = 264.8
  Rate = 0.04 +/- 0.006

[Fri May 25 02:36:29 2012] Off-axis axis estimate = 10.30'
[Fri May 25 02:41:11 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Fri May 25 02:41:11 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Fri May 25 02:41:11 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.051
[Fri May 25 02:41:11 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 11.58"
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src62.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src62.csv
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src62_1.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src62.csv
[Fri May 25 07:00:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:00:05 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Fri May 25 07:00:05 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Fri May 25 07:00:05 2012] Fit fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Sat May 26 08:11:38 2012] Warning, spatial fit 62 centroid is now closest to src. 55
[Sat May 26 08:11:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:38 2012] Assessing source extent using major
[Sat May 26 08:11:38 2012] Source does appear to be extended
[Sat May 26 08:11:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:38 2012] Source is confused with source 58
[Sat May 26 08:12:16 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Sat May 26 08:12:16 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Sat May 26 08:12:16 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.051
[Sat May 26 08:12:16 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.58"
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src48.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src48.csv
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src48.csv
[Sat May 26 12:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:18:12 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat May 26 12:18:12 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat May 26 12:18:12 2012] Fit fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Sun May 27 03:12:40 2012] Source 66 is offset by -9.293994 and 2.928576 pixels which is larger than
2 X fitted extent = 1.302966 x 1.302966, not incorporating fit results
[Sun May 27 03:12:40 2012] Warning, spatial fit 48 centroid is now closest to src. 53
[Sun May 27 03:12:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:40 2012] Assessing source extent using major
[Sun May 27 03:12:40 2012] Source does appear to be extended
[Sun May 27 03:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:13:05 2012] XMMSAS src. selection expression = ellipse(23148.286530, 13871.922150, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 03:13:05 2012] Writing source region out to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src66_src.reg
[Sun May 27 03:13:05 2012] Extracting stamp from image fullrun_pn_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (229, 123) - (304, 198)
[Sun May 27 03:13:05 2012] XMMSAS bgd. selection expression = annulus(23148.286530, 13871.922150, 1087.500000, 2175.000000, X, Y) && !ellipse(22067.664383, 13086.148972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.244171, 12208.126801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.429000, 16923.540000, 1059.008030, 1059.008030, 0.000000, X, Y) && !ellipse(22080.585083, 16752.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.611862, 15616.499420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.037170, 15108.876404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23109.772675, 14477.217056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22117.504593, 14219.308838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22079.235001, 13609.434006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.186000, 12053.542000, 3863.152111, 3863.152111, 0.000000, X, Y) && !ellipse(20606.032257, 12464.522980, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 03:13:05 2012] Writing fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src66.gif
[Sun May 27 03:46:49 2012] Mean detx,y = (1673.82, -10568.22) 
[Sun May 27 03:46:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:47:05 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:47:05 2012] Setting source spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Sun May 27 03:47:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Sun May 27 04:38:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 04:38:28 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:20 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:20 2012] Error reading totcts from fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Mon May 28 22:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:21 2012] Using photon index=1.80, rate=0.042, arf fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src66.arf
[Mon May 28 22:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:21 2012] Updating source flux to 2.1e-13
[Mon May 28 22:46:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting