[Fri May 25 02:36:28 2012] Detection parameters:
  Position = (266.5, 243.0) = 18 1 6.46 -24 54 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 464.6 +/- 28.4
  Background counts = 38.1
  Rate = 0.09 +/- 0.006

[Fri May 25 02:36:29 2012] Off-axis axis estimate = 4.64'
[Fri May 25 02:41:10 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Fri May 25 02:41:10 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Fri May 25 02:41:10 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Fri May 25 02:41:10 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.75"
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src3.csv
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src3.csv
[Fri May 25 07:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 25 07:00:03 2012] Fit fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat May 26 08:11:37 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Sat May 26 08:11:38 2012] Source 4 is offset by -0.188781 and -2.704409 pixels which is larger than
2 X fitted extent = 2.006772 x 2.006772, not incorporating fit results
[Sat May 26 08:11:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:38 2012] Assessing source extent using major
[Sat May 26 08:11:38 2012] Source does appear to be extended
[Sat May 26 08:11:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:38 2012] Source is confused with source 29
[Sat May 26 08:11:38 2012] Source is confused with source 34
[Sat May 26 08:12:16 2012] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat May 26 08:12:16 2012] Initial guess for spatial extent in simple fitting = 8.75"
[Sat May 26 08:12:16 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.991
[Sat May 26 08:12:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.75"
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src3.csv
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src3.csv
[Sat May 26 12:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 26 12:18:10 2012] Fit fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 27 03:12:39 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.375974 pixels away
[Sun May 27 03:12:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:40 2012] Assessing source extent using major
[Sun May 27 03:12:40 2012] Source does appear to be extended
[Sun May 27 03:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:13:03 2012] XMMSAS src. selection expression = ellipse(23134.098053, 21096.510422, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 03:13:03 2012] Writing source region out to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src4_src.reg
[Sun May 27 03:13:03 2012] Extracting stamp from image fullrun_pn_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (229, 206) - (304, 281)
[Sun May 27 03:13:03 2012] XMMSAS bgd. selection expression = annulus(23134.098053, 21096.510422, 1087.500000, 2175.000000, X, Y) && !ellipse(23228.768000, 19668.796000, 894.576026, 894.576026, 0.000000, X, Y) && !ellipse(23116.646545, 22960.355591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21294.072479, 22740.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.933334, 22743.012238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23127.901215, 22225.225769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.968000, 21720.574000, 1356.544039, 1356.544039, 0.000000, X, Y) && !ellipse(22145.653214, 21093.025696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22698.184723, 21015.840012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21931.172000, 20269.818000, 1404.336040, 1404.336040, 0.000000, X, Y) && !ellipse(23313.332000, 20435.308600, 1276.448037, 1276.448037, 0.000000, X, Y) && !ellipse(21337.283081, 20052.656448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.974304, 19702.866959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22679.530487, 18499.148361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22142.210968, 18657.478378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.478400, 18341.313600, 1145.776033, 1145.776033, 0.000000, X, Y)
[Sun May 27 03:13:03 2012] Writing fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src4.gif
[Sun May 27 03:27:28 2012] Mean detx,y = (1721.25, -3350.85) 
[Sun May 27 03:27:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:27:40 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:27:41 2012] Setting source spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 27 03:27:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 27 03:59:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 03:59:14 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:19 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:19 2012] Error reading totcts from fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 28 22:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:20 2012] Using photon index=1.80, rate=0.092, arf fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src4.arf
[Mon May 28 22:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:20 2012] Updating source flux to 2.8e-13
[Mon May 28 22:46:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 28 22:49:07 2012] xmm0103261901/analysis//spectral/fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete