[Fri May 25 02:36:28 2012] Detection parameters:
  Position = (255.0, 262.0) = 18 1 10.11 -24 52 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 404.3 +/- 25.6
  Background counts = 30.5
  Rate = 0.08 +/- 0.005

[Fri May 25 02:36:29 2012] Off-axis axis estimate = 4.11'
[Fri May 25 02:41:10 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Fri May 25 02:41:10 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Fri May 25 02:41:10 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.666
[Fri May 25 02:41:10 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.48"
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src21.csv
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src21.csv
[Fri May 25 07:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri May 25 07:00:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:38 2012] Source 23 is offset by 1.968406 and -8.088158 pixels which is larger than
2 X fitted extent = 8.059540 x 8.059540, not incorporating fit results
[Sat May 26 08:11:38 2012] Warning, spatial fit 21 centroid is now closest to src. 19
[Sat May 26 08:11:38 2012] Spatial fit model total counts = 1575.100000, observed total counts = 1375.000000
[Sat May 26 08:11:38 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 26 08:11:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:38 2012] Assessing source extent using major
[Sat May 26 08:11:38 2012] Source does appear to be extended
[Sat May 26 08:11:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:12:16 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sat May 26 08:12:16 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Sat May 26 08:12:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.666
[Sat May 26 08:12:16 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 8.48"
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src18.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src18.csv
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src18.csv
[Sat May 26 12:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:18:11 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat May 26 12:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat May 26 12:18:11 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat May 26 12:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat May 26 12:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:40 2012] Spatial fit model total counts = 1461.790000, observed total counts = 1132.000000
[Sun May 27 03:12:40 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 03:12:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:40 2012] Assessing source extent using major
[Sun May 27 03:12:40 2012] Source does appear to be extended
[Sun May 27 03:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:13:04 2012] XMMSAS src. selection expression = ellipse(22138.933334, 22743.012238, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 03:13:04 2012] Writing source region out to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src23_src.reg
[Sun May 27 03:13:04 2012] Extracting stamp from image fullrun_pn_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (218, 224) - (293, 299)
[Sun May 27 03:13:04 2012] XMMSAS bgd. selection expression = annulus(22138.933334, 22743.012238, 1087.500000, 2175.000000, X, Y) && !ellipse(23134.098053, 21096.510422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23116.646545, 22960.355591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21294.072479, 22740.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23127.901215, 22225.225769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.968000, 21720.574000, 1356.544039, 1356.544039, 0.000000, X, Y) && !ellipse(22145.653214, 21093.025696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22698.184723, 21015.840012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21931.172000, 20269.818000, 1404.336040, 1404.336040, 0.000000, X, Y) && !ellipse(23313.332000, 20435.308600, 1276.448037, 1276.448037, 0.000000, X, Y) && !ellipse(21337.283081, 20052.656448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.974304, 19702.866959, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 03:13:04 2012] Writing fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src23.gif
[Sun May 27 03:36:07 2012] Mean detx,y = (2626.76, -1756.44) 
[Sun May 27 03:36:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:36:23 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:36:24 2012] Setting source spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun May 27 03:36:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun May 27 04:11:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 04:11:31 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:19 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:19 2012] Error reading totcts from fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon May 28 22:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:20 2012] Using photon index=1.80, rate=0.0801, arf fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src23.arf
[Mon May 28 22:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:20 2012] Updating source flux to 2.2e-13
[Mon May 28 22:46:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting