[Fri May 25 02:36:28 2012] Detection parameters:
  Position = (282.9, 99.1) = 18 1 1.22 -25 4 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7733.7 +/- 107.6
  Background counts = 7.1
  Rate = 2 +/- 0.02

[Fri May 25 02:36:29 2012] Off-axis axis estimate = 14.50'
[Fri May 25 02:41:10 2012] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Fri May 25 02:41:10 2012] Initial guess for spatial extent in simple fitting = 13.68"
[Fri May 25 02:41:10 2012] source mask rpix=3.1, npix_max = 53, mask sum = 48, frac = 0.904
[Fri May 25 02:41:10 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.68"
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src12.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src12.csv
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src12.csv
[Fri May 25 07:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri May 25 07:00:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:37 2012] Warning, spatial fit 12 centroid is now closest to src. 1
[Sat May 26 08:11:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:38 2012] Assessing source extent using major
[Sat May 26 08:11:38 2012] Source does appear to be extended
[Sat May 26 08:11:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:38 2012] Source is confused with source 7
[Sat May 26 08:12:16 2012] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Sat May 26 08:12:16 2012] Initial guess for spatial extent in simple fitting = 13.68"
[Sat May 26 08:12:16 2012] source mask rpix=3.1, npix_max = 53, mask sum = 48, frac = 0.904
[Sat May 26 08:12:16 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.68"
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src11.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src11.csv
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src11.csv
[Sat May 26 12:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat May 26 12:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:39 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.120776 pixels away
[Sun May 27 03:12:40 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.860970 pixels away
[Sun May 27 03:12:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:40 2012] Assessing source extent using major
[Sun May 27 03:12:40 2012] Source does appear to be extended
[Sun May 27 03:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:13:03 2012] Counts = 7733.749512, rescaling region sizes by 2.000000
[Sun May 27 03:13:03 2012] XMMSAS src. selection expression = ellipse(24561.303741, 8571.077171, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 27 03:13:03 2012] Writing source region out to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src14_src.reg
[Sun May 27 03:13:03 2012] Extracting stamp from image fullrun_pn_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (208, 24) - (358, 174)
[Sun May 27 03:13:04 2012] XMMSAS bgd. selection expression = annulus(24561.303741, 8571.077171, 4350.000000, 8700.000000, X, Y) && !ellipse(23222.191925, 8311.267288, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21240.529831, 8574.522736, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21932.597733, 8387.601372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24443.861176, 8125.151726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22067.664383, 13086.148972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.244171, 12208.126801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.702301, 10730.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28133.643005, 9436.957893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28123.649475, 8657.047684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21296.507141, 8165.964836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.478400, 18341.313600, 1145.776033, 1145.776033, 0.000000, X, Y) && !ellipse(22150.498642, 17179.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.429000, 16923.540000, 1059.008030, 1059.008030, 0.000000, X, Y) && !ellipse(22080.585083, 16752.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.611862, 15616.499420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.037170, 15108.876404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31948.669000, 15465.900000, 1550.016045, 1550.016045, 0.000000, X, Y) && !ellipse(29662.486000, 14753.020000, 1805.224052, 1805.224052, 0.000000, X, Y) && !ellipse(23109.772675, 14477.217056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31131.062225, 14542.537415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22117.504593, 14219.308838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32054.372559, 14384.891068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30583.119934, 14008.309677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29916.404907, 14131.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31281.127136, 13932.488678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22079.235001, 13609.434006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23148.286530, 13871.922150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31728.796936, 13502.152237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30408.258000, 12905.152000, 1960.664056, 1960.664056, 0.000000, X, Y) && !ellipse(29846.144000, 13419.280000, 1931.576056, 1931.576056, 0.000000, X, Y) && !ellipse(28904.186000, 12053.542000, 3863.152111, 3863.152111, 0.000000, X, Y) && !ellipse(29970.453339, 12535.068436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20606.032257, 12464.522980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20058.104568, 12477.247208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18887.904388, 11265.940536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.490051, 8070.315414, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 03:13:04 2012] Writing fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src14.gif
[Sun May 27 03:31:36 2012] Mean detx,y = (894.81, -15921.43) 
[Sun May 27 03:31:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:32:39 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:32:40 2012] Setting source spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun May 27 03:32:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun May 27 04:03:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 04:03:23 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:19 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:19 2012] Error reading totcts from fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 28 22:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:20 2012] Using photon index=1.80, rate=1.53, arf fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src14.arf
[Mon May 28 22:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:20 2012] Updating source flux to 1.1e-11
[Mon May 28 22:46:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting