[Fri May 25 02:36:28 2012] Detection parameters:
  Position = (303.3, 123.9) = 18 0 54.69 -25 2 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267.7 +/- 26.0
  Background counts = 84.9
  Rate = 0.05 +/- 0.005

[Fri May 25 02:36:29 2012] Off-axis axis estimate = 12.66'
[Fri May 25 02:41:10 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Fri May 25 02:41:10 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Fri May 25 02:41:10 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.039
[Fri May 25 02:41:10 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.76"
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src9.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src9.csv
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src9.csv
[Fri May 25 07:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri May 25 07:00:03 2012] Fit fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat May 26 08:11:37 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.300579 pixels away
[Sat May 26 08:11:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:38 2012] Assessing source extent using major
[Sat May 26 08:11:38 2012] Source does appear to be extended
[Sat May 26 08:11:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:12:16 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Sat May 26 08:12:16 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Sat May 26 08:12:16 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.039
[Sat May 26 08:12:16 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 12.76"
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src8.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src8.csv
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src8.csv
[Sat May 26 12:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat May 26 12:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:39 2012] Warning, spatial fit 8 centroid is now closest to src. 14
[Sun May 27 03:12:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:40 2012] Assessing source extent using major
[Sun May 27 03:12:40 2012] Source does appear to be extended
[Sun May 27 03:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:12:40 2012] Source is confused with source 70
[Sun May 27 03:13:03 2012] XMMSAS src. selection expression = ellipse(26335.702301, 10730.629547, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 03:13:03 2012] Writing source region out to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src11_src.reg
[Sun May 27 03:13:03 2012] Extracting stamp from image fullrun_pn_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (266, 86) - (341, 161)
[Sun May 27 03:13:03 2012] XMMSAS bgd. selection expression = annulus(26335.702301, 10730.629547, 1087.500000, 2175.000000, X, Y) && !ellipse(23222.191925, 8311.267288, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21932.597733, 8387.601372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24443.861176, 8125.151726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28133.643005, 9436.957893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28123.649475, 8657.047684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.303741, 8571.077171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30408.258000, 12905.152000, 1960.664056, 1960.664056, 0.000000, X, Y) && !ellipse(29846.144000, 13419.280000, 1931.576056, 1931.576056, 0.000000, X, Y) && !ellipse(28904.186000, 12053.542000, 3863.152111, 3863.152111, 0.000000, X, Y) && !ellipse(28092.490051, 8070.315414, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 03:13:03 2012] Writing fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src11.gif
[Sun May 27 03:30:21 2012] Mean detx,y = (-1423.16, -13757.32) 
[Sun May 27 03:30:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:30:36 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:30:36 2012] Setting source spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 27 03:30:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May 27 04:02:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 04:02:55 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:19 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:19 2012] Error reading totcts from fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 22:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:20 2012] Using photon index=1.80, rate=0.053, arf fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src11.arf
[Mon May 28 22:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:20 2012] Updating source flux to 3.5e-13
[Mon May 28 22:46:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting