[Fri May 25 02:36:28 2012] Detection parameters:
  Position = (267.5, 96.1) = 18 1 6.15 -25 4 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92673.4 +/- 362.3
  Background counts = 4.9
  Rate = 2e+01 +/- 0.07

[Fri May 25 02:36:29 2012] Off-axis axis estimate = 14.84'
[Fri May 25 02:41:10 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Fri May 25 02:41:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 02:41:10 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Fri May 25 02:41:10 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.032
[Fri May 25 02:41:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.85"
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src1.csv
[Fri May 25 07:00:01 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 25 07:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src1.csv
[Fri May 25 07:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 25 07:00:03 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 25 07:00:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 25 07:00:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:37 2012] Spatial fit model total counts = 235350.000000, observed total counts = 191722.000000
[Sat May 26 08:11:37 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 26 08:11:37 2012] Spatial fit model total counts = 57680.200000, observed total counts = 43790.000000
[Sat May 26 08:11:37 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 26 08:11:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:38 2012] Assessing source extent using major
[Sat May 26 08:11:38 2012] Source does appear to be extended
[Sat May 26 08:11:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:12:16 2012] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Sat May 26 08:12:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 08:12:16 2012] Initial guess for spatial extent in simple fitting = 13.85"
[Sat May 26 08:12:16 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.032
[Sat May 26 08:12:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.85"
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src1.csv
[Sat May 26 12:18:09 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 26 12:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src1.csv
[Sat May 26 12:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 26 12:18:10 2012] fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 26 12:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 26 12:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:39 2012] Spatial fit model total counts = 235334.000000, observed total counts = 191722.000000
[Sun May 27 03:12:39 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 03:12:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:40 2012] Assessing source extent using major
[Sun May 27 03:12:40 2012] Source does appear to be extended
[Sun May 27 03:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:13:03 2012] Counts = 92673.359375, rescaling region sizes by 3.000000
[Sun May 27 03:13:03 2012] XMMSAS src. selection expression = ellipse(23222.191925, 8311.267288, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun May 27 03:13:03 2012] Writing source region out to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src1_src.reg
[Sun May 27 03:13:03 2012] Extracting stamp from image fullrun_pn_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (155, 0) - (380, 209)
[Sun May 27 03:13:03 2012] XMMSAS bgd. selection expression = annulus(23222.191925, 8311.267288, 9787.500000, 19575.000000, X, Y) && !ellipse(21240.529831, 8574.522736, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21932.597733, 8387.601372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23134.098053, 21096.510422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23228.768000, 19668.796000, 894.576026, 894.576026, 0.000000, X, Y) && !ellipse(24443.861176, 8125.151726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22067.664383, 13086.148972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.244171, 12208.126801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26335.702301, 10730.629547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28133.643005, 9436.957893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28123.649475, 8657.047684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24561.303741, 8571.077171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21296.507141, 8165.964836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20525.558319, 27332.179932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24925.989080, 24205.758000, 424.299212, 424.299212, 0.000000, X, Y) && !ellipse(23116.646545, 22960.355591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21294.072479, 22740.659882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.933334, 22743.012238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23127.901215, 22225.225769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21959.968000, 21720.574000, 1356.544039, 1356.544039, 0.000000, X, Y) && !ellipse(22145.653214, 21093.025696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22698.184723, 21015.840012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21931.172000, 20269.818000, 1404.336040, 1404.336040, 0.000000, X, Y) && !ellipse(23313.332000, 20435.308600, 1276.448037, 1276.448037, 0.000000, X, Y) && !ellipse(21337.283081, 20052.656448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.974304, 19702.866959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22679.530487, 18499.148361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22142.210968, 18657.478378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.478400, 18341.313600, 1145.776033, 1145.776033, 0.000000, X, Y) && !ellipse(22085.852000, 18057.700000, 577.369617, 577.369617, 0.000000, X, Y) && !ellipse(22150.498642, 17179.507202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.429000, 16923.540000, 1059.008030, 1059.008030, 0.000000, X, Y) && !ellipse(22080.585083, 16752.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22062.611862, 15616.499420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.037170, 15108.876404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31948.669000, 15465.900000, 1550.016045, 1550.016045, 0.000000, X, Y) && !ellipse(29662.486000, 14753.020000, 1805.224052, 1805.224052, 0.000000, X, Y) && !ellipse(23109.772675, 14477.217056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31131.062225, 14542.537415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22117.504593, 14219.308838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32054.372559, 14384.891068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30583.119934, 14008.309677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29916.404907, 14131.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31281.127136, 13932.488678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22079.235001, 13609.434006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23148.286530, 13871.922150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31728.796936, 13502.152237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30408.258000, 12905.152000, 1960.664056, 1960.664056, 0.000000, X, Y) && !ellipse(29846.144000, 13419.280000, 1931.576056, 1931.576056, 0.000000, X, Y) && !ellipse(28904.186000, 12053.542000, 3863.152111, 3863.152111, 0.000000, X, Y) && !ellipse(29970.453339, 12535.068436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20606.032257, 12464.522980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20058.104568, 12477.247208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18887.904388, 11265.940536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.490051, 8070.315414, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 03:13:03 2012] Writing fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src1.gif
[Sun May 27 03:13:34 2012] Mean detx,y = (1894.12, -15946.82) 
[Sun May 27 03:13:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:18:22 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:18:23 2012] Setting source spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 27 03:18:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 27 03:57:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 03:57:44 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:19 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:19 2012] Error reading totcts from fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 22:37:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:20 2012] Using photon index=1.80, rate=18.4, arf fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src1.arf
[Mon May 28 22:37:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:20 2012] Updating source flux to 1.4e-10
[Mon May 28 22:46:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 28 22:49:07 2012] xmm0103261901/analysis//spectral/fullrun_pn_xmm0103261901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete