[Fri May 25 02:37:16 2012] Detection parameters:
  Position = (318.4, 92.4) = 18 0 49.83 -25 4 60.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 425.6 +/- 31.7
  Background counts = 107.3
  Rate = 0.06 +/- 0.004

[Fri May 25 02:37:16 2012] Off-axis axis estimate = 15.01'
[Fri May 25 20:33:13 2012] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Fri May 25 20:33:13 2012] Initial guess for spatial extent in simple fitting = 13.93"
[Fri May 25 20:33:13 2012] source mask rpix=3.2, npix_max = 54, mask sum = 38, frac = 0.693
[Fri May 25 20:33:13 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.93"
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src13.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src13.csv
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src13.csv
[Sat May 26 08:11:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat May 26 08:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat May 26 08:11:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May 26 08:11:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:12:03 2012] Warning, spatial fit 13 centroid is now closest to src. 66
[Sat May 26 08:12:03 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:12:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:12:03 2012] Assessing source extent using major
[Sat May 26 08:12:03 2012] Source does appear to be extended
[Sat May 26 08:12:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 23:42:29 2012] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:42:29 2012] Initial guess for spatial extent in simple fitting = 13.93"
[Sat May 26 23:42:29 2012] source mask rpix=3.2, npix_max = 54, mask sum = 38, frac = 0.693
[Sat May 26 23:42:29 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.93"
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src13.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src13.csv
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src13.csv
[Sun May 27 03:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun May 27 03:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:51 2012] Source 69 is offset by -8.211319 and -1.308823 pixels which is larger than
2 X fitted extent = 2.931881 x 2.931881, not incorporating fit results
[Sun May 27 03:12:51 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:51 2012] Assessing source extent using major
[Sun May 27 03:12:51 2012] Source does appear to be extended
[Sun May 27 03:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 06:31:27 2012] XMMSAS src. selection expression = ellipse(27656.311218, 7992.908035, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 06:31:27 2012] Writing source region out to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src69_src.reg
[Sun May 27 06:31:27 2012] Extracting stamp from image fullrun_mos2_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (281, 55) - (356, 130)
[Sun May 27 06:31:27 2012] XMMSAS bgd. selection expression = annulus(27656.311218, 7992.908035, 1087.500000, 2175.000000, X, Y) && !ellipse(22004.903400, 8317.286000, 4495.824129, 4495.824129, 0.000000, X, Y) && !ellipse(23374.693200, 8402.244400, 5946.120171, 4464.576128, 3.475270, X, Y) && !ellipse(23428.775000, 8356.831600, 5535.840159, 4403.448127, 355.215970, X, Y) && !ellipse(24734.154114, 8650.792435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.560000, 7807.158000, 3964.104114, 3964.104114, 0.000000, X, Y) && !ellipse(25361.150000, 9995.762000, 1318.256038, 1318.256038, 0.000000, X, Y) && !ellipse(24929.487274, 10904.612953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.002655, 9424.361107, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 06:31:27 2012] Writing fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src69.gif
[Sun May 27 07:09:37 2012] Mean detx,y = (2962.46, 16155.25) 
[Sun May 27 07:09:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 07:09:46 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 07:09:46 2012] Setting source spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sun May 27 07:09:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Mon May 28 22:12:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 22:12:53 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:22 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:22 2012] Error reading totcts from fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Mon May 28 22:37:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:22 2012] Using photon index=1.80, rate=0.0582, arf fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src69.arf
[Mon May 28 22:37:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 2.3e-12
[Mon May 28 22:42:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting