[Fri May 25 02:37:16 2012] Detection parameters:
  Position = (237.9, 138.9) = 18 1 15.62 -25 1 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.7 +/- 32.0
  Background counts = 210.2
  Rate = 0.04 +/- 0.004

[Fri May 25 02:37:16 2012] Off-axis axis estimate = 12.37'
[Fri May 25 20:33:13 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri May 25 20:33:13 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri May 25 20:33:13 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.060
[Fri May 25 20:33:13 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.61"
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src15.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src15.csv
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src15.csv
[Sat May 26 08:11:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 26 08:11:19 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat May 26 08:12:03 2012] Source 57 is offset by -9.352956 and -1.133081 pixels which is larger than
2 X fitted extent = 1.551839 x 1.551839, not incorporating fit results
[Sat May 26 08:12:03 2012] Warning, spatial fit 15 centroid is now closest to src. 43
[Sat May 26 08:12:03 2012] Source 57 is offset by 4.363665 and 6.198620 pixels which is larger than
2 X fitted extent = 1.513628 x 1.513628, not incorporating fit results
[Sat May 26 08:12:03 2012] Source 57 is offset by -4.820749 and -1.789679 pixels which is larger than
2 X fitted extent = 1.438740 x 1.438740, not incorporating fit results
[Sat May 26 08:12:03 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:12:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:12:03 2012] Assessing source extent using major
[Sat May 26 08:12:03 2012] Source does appear to be extended
[Sat May 26 08:12:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 23:42:29 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:42:29 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Sat May 26 23:42:29 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.060
[Sat May 26 23:42:29 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.61"
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src15.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src15.csv
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src15.csv
[Sun May 27 03:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May 27 03:12:25 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun May 27 03:12:51 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 10.514139 pixels away
[Sun May 27 03:12:51 2012] Source 57 is offset by -4.897898 and -1.825150 pixels which is larger than
2 X fitted extent = 1.441048 x 1.441048, not incorporating fit results
[Sun May 27 03:12:51 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:51 2012] Assessing source extent using major
[Sun May 27 03:12:51 2012] Source does appear to be extended
[Sun May 27 03:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 06:31:27 2012] XMMSAS src. selection expression = ellipse(20647.114853, 12034.925964, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 06:31:27 2012] Writing source region out to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src57_src.reg
[Sun May 27 06:31:27 2012] Extracting stamp from image fullrun_mos2_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (200, 101) - (275, 176)
[Sun May 27 06:31:27 2012] XMMSAS bgd. selection expression = annulus(20647.114853, 12034.925964, 1087.500000, 2175.000000, X, Y) && !ellipse(22004.903400, 8317.286000, 4495.824129, 4495.824129, 0.000000, X, Y) && !ellipse(23374.693200, 8402.244400, 5946.120171, 4464.576128, 3.475270, X, Y) && !ellipse(23428.775000, 8356.831600, 5535.840159, 4403.448127, 355.215970, X, Y) && !ellipse(22148.999878, 7825.481888, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25290.560000, 7807.158000, 3964.104114, 3964.104114, 0.000000, X, Y) && !ellipse(20269.107712, 10118.530464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22224.564667, 11079.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22451.198000, 11924.992000, 2031.456058, 2031.456058, 0.000000, X, Y) && !ellipse(22857.084000, 13596.248000, 1921.536055, 1921.536055, 0.000000, X, Y)
[Sun May 27 06:31:27 2012] Writing fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src57.gif
[Sun May 27 07:10:05 2012] Mean detx,y = (-3949.36, 12369.07) 
[Sun May 27 07:10:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 07:10:13 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 07:10:13 2012] Setting source spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sun May 27 07:10:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon May 28 22:13:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 22:13:16 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:22 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:22 2012] Error reading totcts from fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon May 28 22:37:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:22 2012] Using photon index=1.80, rate=0.0418, arf fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src57.arf
[Mon May 28 22:37:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 1e-12
[Mon May 28 22:42:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting