[Fri May 25 02:37:16 2012] Detection parameters:
  Position = (257.2, 146.8) = 18 1 9.44 -25 1 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.7 +/- 28.5
  Background counts = 210.9
  Rate = 0.03 +/- 0.004

[Fri May 25 02:37:16 2012] Off-axis axis estimate = 11.39'
[Fri May 25 20:33:13 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Fri May 25 20:33:13 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Fri May 25 20:33:13 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.833
[Fri May 25 20:33:13 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 12.13"
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src23.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src23.csv
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src23.csv
[Sat May 26 08:11:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat May 26 08:11:19 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat May 26 08:12:03 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 11.834735 pixels away
[Sat May 26 08:12:03 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:12:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:12:03 2012] Assessing source extent using major
[Sat May 26 08:12:03 2012] Source does appear to be extended
[Sat May 26 08:12:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 23:42:29 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:42:29 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Sat May 26 23:42:29 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.833
[Sat May 26 23:42:29 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.13"
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src21.ximg exists
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun May 27 03:12:25 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src21 appears to have run properly
[Sun May 27 03:12:26 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun May 27 03:12:26 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun May 27 03:12:26 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun May 27 03:12:51 2012] Spatial fit model total counts = 10449.700000, observed total counts = 10417.000000
[Sun May 27 03:12:51 2012] Offset between fit and detection position for source 44 = 9.284945 pixels
[Sun May 27 03:12:51 2012] Warning, changing simple spatial fit ID from 21 to 9
[Sun May 27 03:12:51 2012] 9794.558000 total counts/ 8858.920000 bgd. counts: snr = 9.940711
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 9.284945 pixels
  Position = (258.6, 137.6) = 18 1 8.98 -25 1 42.3
  Extent = 25.4" x 25.4", rotation angle = 0
  Source counts = 935.6 +/- 99.0
  Background counts = 8858.9
  Rate = 0.1 +/- 0.01
[Sun May 27 03:12:51 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:51 2012] Assessing source extent using major
[Sun May 27 03:12:51 2012] Source does appear to be extended
[Sun May 27 03:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:12:51 2012] Source is confused with source 62
[Sun May 27 06:31:27 2012] XMMSAS src. selection expression = ellipse(22451.198000, 11924.992000, 1523.592044, 1523.592044, 0.000000, X, Y)
[Sun May 27 06:31:27 2012] Writing source region out to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src44_src.reg
[Sun May 27 06:31:27 2012] Extracting stamp from image fullrun_mos2_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (171, 50) - (346, 225)
[Sun May 27 06:31:27 2012] XMMSAS bgd. selection expression = annulus(22451.198000, 11924.992000, 2539.320073, 5078.640146, X, Y) && !ellipse(22004.903400, 8317.286000, 4495.824129, 4495.824129, 0.000000, X, Y) && !ellipse(23374.693200, 8402.244400, 5946.120171, 4464.576128, 3.475270, X, Y) && !ellipse(23428.775000, 8356.831600, 5535.840159, 4403.448127, 355.215970, X, Y) && !ellipse(22148.999878, 7825.481888, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24734.154114, 8650.792435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.560000, 7807.158000, 3964.104114, 3964.104114, 0.000000, X, Y) && !ellipse(25361.150000, 9995.762000, 1318.256038, 1318.256038, 0.000000, X, Y) && !ellipse(20269.107712, 10118.530464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22224.564667, 11079.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24929.487274, 10904.612953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.303925, 11170.016983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.002655, 9424.361107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.311218, 7992.908035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.850159, 12023.306229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.114853, 12034.925964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23914.642151, 12561.099670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16924.581200, 12206.104200, 1166.514596, 1166.514596, 0.000000, X, Y) && !ellipse(25545.676000, 12739.322000, 1956.472056, 1956.472056, 0.000000, X, Y) && !ellipse(22857.084000, 13596.248000, 1921.536055, 1921.536055, 0.000000, X, Y) && !ellipse(27577.696000, 12468.184000, 1215.288035, 1215.288035, 0.000000, X, Y) && !ellipse(27308.532000, 13599.387200, 1858.752053, 1858.752053, 0.000000, X, Y)
[Sun May 27 06:31:27 2012] Writing fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src44.gif
[Sun May 27 07:11:20 2012] Mean detx,y = (-2179.47, 12716.68) 
[Sun May 27 07:11:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 07:11:36 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 07:11:36 2012] Setting source spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun May 27 07:11:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Mon May 28 22:37:22 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:22 2012] Error reading totcts from fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon May 28 22:37:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:22 2012] Using photon index=1.80, rate=0.128, arf fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src44.arf
[Mon May 28 22:37:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 2.6e-12
[Mon May 28 22:42:31 2012] Flag c found in src. 44 procflags, skipping spectral fitting