[Fri May 25 02:37:16 2012] Detection parameters:
  Position = (284.5, 91.9) = 18 1 0.70 -25 5 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8569.0 +/- 114.6
  Background counts = 6.8
  Rate = 1 +/- 0.02

[Fri May 25 02:37:16 2012] Off-axis axis estimate = 15.00'
[Fri May 25 20:33:13 2012] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Fri May 25 20:33:13 2012] Initial guess for spatial extent in simple fitting = 13.93"
[Fri May 25 20:33:13 2012] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.967
[Fri May 25 20:33:13 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.93"
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src6.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src6.csv
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src6.csv
[Sat May 26 08:11:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat May 26 08:11:19 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat May 26 08:11:19 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat May 26 08:12:03 2012] Spatial fit model total counts = 54623.900000, observed total counts = 53691.000000
[Sat May 26 08:12:03 2012] Offset between fit and detection position for source 33 = 6.951443 pixels
[Sat May 26 08:12:03 2012] 50895.100000 total counts/ 40000.000000 bgd. counts: snr = 54.475500
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 6.951443 pixels
  Position = (291.3, 90.3) = 18 0 58.54 -25 5 8.2
  Extent = 16.5 (15.8-17.3)", rotation angle = 0
  Source counts = 10895.1 +/- 225.6
  Background counts = 40000.0
  Rate = 1 +/- 0.03
[Sat May 26 08:12:03 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:12:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:12:03 2012] Assessing source extent using major axis lower bound
[Sat May 26 08:12:03 2012] Source does appear to be extended
[Sat May 26 08:12:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 23:42:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 23:42:29 2012] Initial guess for spatial extent in simple fitting = 16.52"
[Sat May 26 23:42:29 2012] source mask rpix=3.8, npix_max = 73, mask sum = 59, frac = 0.799
[Sat May 26 23:42:29 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 16.52"
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src6.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src6.csv
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src6.csv
[Sun May 27 03:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May 27 03:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:51 2012] Warning, spatial fit 6 centroid is now closest to src. 13
[Sun May 27 03:12:51 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:51 2012] Assessing source extent using major axis lower bound
[Sun May 27 03:12:51 2012] Source does appear to be extended
[Sun May 27 03:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 06:31:26 2012] Counts = 10895.100000, rescaling region sizes by 3.000000
[Sun May 27 06:31:26 2012] XMMSAS src. selection expression = ellipse(25290.560000, 7807.158000, 2973.078086, 2973.078086, 0.000000, X, Y)
[Sun May 27 06:31:26 2012] Writing source region out to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src33_src.reg
[Sun May 27 06:31:26 2012] Extracting stamp from image fullrun_mos2_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (120, 0) - (462, 261)
[Sun May 27 06:31:26 2012] XMMSAS bgd. selection expression = annulus(25290.560000, 7807.158000, 14865.390428, 29730.780855, X, Y) && !ellipse(22004.903400, 8317.286000, 4495.824129, 4495.824129, 0.000000, X, Y) && !ellipse(23374.693200, 8402.244400, 5946.120171, 4464.576128, 3.475270, X, Y) && !ellipse(23428.775000, 8356.831600, 5535.840159, 4403.448127, 355.215970, X, Y) && !ellipse(22148.999878, 7825.481888, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24734.154114, 8650.792435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25361.150000, 9995.762000, 1318.256038, 1318.256038, 0.000000, X, Y) && !ellipse(20269.107712, 10118.530464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22224.564667, 11079.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24929.487274, 10904.612953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.303925, 11170.016983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.002655, 9424.361107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.311218, 7992.908035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.850159, 12023.306229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.114853, 12034.925964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23914.642151, 12561.099670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22809.706800, 34053.672800, 1314.600038, 1314.600038, 0.000000, X, Y) && !ellipse(16924.581200, 12206.104200, 1166.514596, 1166.514596, 0.000000, X, Y) && !ellipse(22451.198000, 11924.992000, 2031.456058, 2031.456058, 0.000000, X, Y) && !ellipse(25545.676000, 12739.322000, 1956.472056, 1956.472056, 0.000000, X, Y) && !ellipse(22857.084000, 13596.248000, 1921.536055, 1921.536055, 0.000000, X, Y) && !ellipse(27577.696000, 12468.184000, 1215.288035, 1215.288035, 0.000000, X, Y) && !ellipse(27308.532000, 13599.387200, 1858.752053, 1858.752053, 0.000000, X, Y)
[Sun May 27 06:31:26 2012] Writing fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src33.gif
[Sun May 27 06:56:38 2012] Mean detx,y = (-683.45, 15739.05) 
[Sun May 27 06:56:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 07:02:19 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 07:02:19 2012] Setting source spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May 27 07:02:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon May 28 22:37:22 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:22 2012] Error reading totcts from fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon May 28 22:37:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:22 2012] Using photon index=1.80, rate=1.49, arf fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src33.arf
[Mon May 28 22:37:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 5.5e-11