[Fri May 25 02:37:15 2012] Detection parameters:
  Position = (262.9, 91.9) = 18 1 7.60 -25 5 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31217.9 +/- 217.8
  Background counts = 4.8
  Rate = 4 +/- 0.03

[Fri May 25 02:37:16 2012] Off-axis axis estimate = 15.20'
[Fri May 25 20:33:13 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Fri May 25 20:33:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 20:33:13 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Fri May 25 20:33:13 2012] source mask rpix=3.2, npix_max = 55, mask sum = 58, frac = 1.045
[Fri May 25 20:33:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 14.03"
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src3.csv
[Sat May 26 08:11:17 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 26 08:11:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src3.csv
[Sat May 26 08:11:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 08:11:18 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 26 08:11:18 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 26 08:11:18 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat May 26 08:12:03 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.173059 pixels away
[Sat May 26 08:12:03 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:12:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:12:03 2012] Assessing source extent using major
[Sat May 26 08:12:03 2012] Source does appear to be extended
[Sat May 26 08:12:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:12:03 2012] Source is confused with source 1
[Sat May 26 23:42:29 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:42:29 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Sat May 26 23:42:29 2012] source mask rpix=3.2, npix_max = 55, mask sum = 58, frac = 1.045
[Sat May 26 23:42:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.03"
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src3.csv
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 27 03:12:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src3.csv
[Sun May 27 03:12:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 27 03:12:25 2012] fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 27 03:12:25 2012] Fit fullrun_mos2_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 27 03:12:51 2012] Spatial fit model total counts = 262787.000000, observed total counts = 240957.000000
[Sun May 27 03:12:51 2012] Offset between fit and detection position for source 13 = 8.385175 pixels
[Sun May 27 03:12:51 2012] Warning, changing simple spatial fit ID from 3 to 2
[Sun May 27 03:12:51 2012] 196239.000000 total counts/ 90000.000000 bgd. counts: snr = 354.130000
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 8.385175 pixels
  Position = (269.9, 96.6) = 18 1 5.39 -25 4 40.7
  Extent = 23.1 (22.8-23.4)" x 18.3 (18.2-18.5)", rotation angle = 355 (354-357) degrees
  Source counts = 106239.0 +/- 443.0
  Background counts = 90000.0
  Rate = 1e+01 +/- 0.06
[Sun May 27 03:12:51 2012] Source 13 is offset by -6.855460 and -0.170143 pixels which is larger than
2 X fitted extent = 5.814391 x 5.814391, not incorporating fit results
[Sun May 27 03:12:51 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:51 2012] Assessing source extent using major axis lower bound
[Sun May 27 03:12:51 2012] Source does appear to be extended
[Sun May 27 03:12:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Sun May 27 06:31:26 2012] Counts = 106239.000000, rescaling region sizes by 3.000000
[Sun May 27 06:31:26 2012] XMMSAS src. selection expression = ellipse(23428.775000, 8356.831600, 4151.880119, 3302.586095, 355.215970, X, Y)
[Sun May 27 06:31:26 2012] Writing source region out to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src13_src.reg
[Sun May 27 06:31:26 2012] Extracting stamp from image fullrun_mos2_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (31, 0) - (508, 335)
[Sun May 27 06:31:26 2012] XMMSAS bgd. selection expression = annulus(23428.775000, 8356.831600, 20759.400597, 41518.801195, X, Y) && !ellipse(22004.903400, 8317.286000, 4495.824129, 4495.824129, 0.000000, X, Y) && !ellipse(23374.693200, 8402.244400, 5946.120171, 4464.576128, 3.475270, X, Y) && !ellipse(22148.999878, 7825.481888, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24734.154114, 8650.792435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.560000, 7807.158000, 3964.104114, 3964.104114, 0.000000, X, Y) && !ellipse(25361.150000, 9995.762000, 1318.256038, 1318.256038, 0.000000, X, Y) && !ellipse(20269.107712, 10118.530464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22224.564667, 11079.301270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24929.487274, 10904.612953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24042.303925, 11170.016983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.002655, 9424.361107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.311218, 7992.908035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25060.850159, 12023.306229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20647.114853, 12034.925964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23914.642151, 12561.099670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22809.706800, 34053.672800, 1314.600038, 1314.600038, 0.000000, X, Y) && !ellipse(16924.581200, 12206.104200, 1166.514596, 1166.514596, 0.000000, X, Y) && !ellipse(22451.198000, 11924.992000, 2031.456058, 2031.456058, 0.000000, X, Y) && !ellipse(25545.676000, 12739.322000, 1956.472056, 1956.472056, 0.000000, X, Y) && !ellipse(22857.084000, 13596.248000, 1921.536055, 1921.536055, 0.000000, X, Y) && !ellipse(27577.696000, 12468.184000, 1215.288035, 1215.288035, 0.000000, X, Y) && !ellipse(27308.532000, 13599.387200, 1858.752053, 1858.752053, 0.000000, X, Y)
[Sun May 27 06:31:26 2012] Writing fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src13.gif
[Sun May 27 06:45:24 2012] Mean detx,y = (-1706.32, 15531.40) 
[Sun May 27 06:45:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 06:51:46 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 06:51:46 2012] Setting source spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun May 27 06:51:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon May 28 22:37:22 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:22 2012] Error reading totcts from fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon May 28 22:37:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:22 2012] Using photon index=1.80, rate=14.5, arf fullrun_mos2_xmm0103261901_pi300-10000_pass1_cl_src13.arf
[Mon May 28 22:37:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 3.8e-10
[Mon May 28 22:42:31 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Mon May 28 22:42:31 2012] Flag c found in src. 13 procflags, skipping spectral fitting