[Fri May 25 02:36:50 2012] Detection parameters:
  Position = (262.9, 447.0) = 18 1 7.58 -24 39 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.3 +/- 20.8
  Background counts = 24.3
  Rate = 0.03 +/- 0.003

[Fri May 25 02:36:50 2012] Off-axis axis estimate = 11.07'
[Fri May 25 07:00:05 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:00:05 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Fri May 25 07:00:05 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.852
[Fri May 25 07:00:05 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 11.97"
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src24.csv
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src24.csv
[Fri May 25 20:33:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 25 20:33:12 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sat May 26 08:11:49 2012] Warning, spatial fit 24 centroid is now closest to src. 6
[Sat May 26 08:11:49 2012] Source 7 is offset by -9.963086 and -0.160877 pixels which is larger than
2 X fitted extent = 1.420584 x 1.420584, not incorporating fit results
[Sat May 26 08:11:49 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.572489 pixels away
[Sat May 26 08:11:49 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:49 2012] Assessing source extent using major
[Sat May 26 08:11:49 2012] Source does appear to be extended
[Sat May 26 08:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:49 2012] Source is confused with source 6
[Sat May 26 08:11:49 2012] Source is confused with source 8
[Sat May 26 12:18:12 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sat May 26 12:18:12 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Sat May 26 12:18:12 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.852
[Sat May 26 12:18:12 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 11.97"
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src22.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src22.csv
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src22.csv
[Sat May 26 23:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat May 26 23:42:28 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun May 27 03:12:46 2012] Spatial fit model total counts = 1014.080000, observed total counts = 1014.000000
[Sun May 27 03:12:46 2012] Offset between fit and detection position for source 7 = 1.116114 pixels
[Sun May 27 03:12:46 2012] 522.165000 total counts/ 315.984000 bgd. counts: snr = 11.598881
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.116114 pixels
  Position = (262.2, 446.1) = 18 1 7.80 -24 39 20.5
  Extent = 13.9 (7.9-23.9)", rotation angle = 0
  Source counts = 206.2 +/- 22.9
  Background counts = 316.0
  Rate = 0.03 +/- 0.003
[Sun May 27 03:12:46 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:46 2012] Assessing source extent using major axis lower bound
[Sun May 27 03:12:46 2012] Source does appear to be extended
[Sun May 27 03:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 04:50:26 2012] XMMSAS src. selection expression = ellipse(22764.155800, 38761.760200, 832.230024, 832.230024, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing source region out to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src7_src.reg
[Sun May 27 04:50:26 2012] Extracting stamp from image fullrun_mos1_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (214, 398) - (310, 494)
[Sun May 27 04:50:26 2012] XMMSAS bgd. selection expression = annulus(22764.155800, 38761.760200, 1387.050040, 2774.100080, X, Y) && !ellipse(22906.927800, 34410.608000, 1651.760048, 1651.760048, 0.000000, X, Y) && !ellipse(22779.691467, 39798.986816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22823.523346, 36053.664429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.860901, 41192.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22870.120400, 39375.112000, 1914.120055, 1914.120055, 0.000000, X, Y) && !ellipse(22813.968480, 36487.580000, 1735.184050, 1332.424038, 89.536000, X, Y) && !ellipse(22761.373817, 36934.172288, 2589.024074, 1213.206866, 93.492041, X, Y) && !ellipse(22792.133400, 38169.681000, 1629.776047, 1629.776047, 0.000000, X, Y) && !ellipse(22756.932556, 37704.521820, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src7.gif
[Sun May 27 05:19:37 2012] Mean detx,y = (-14234.98, 1845.74) 
[Sun May 27 05:19:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:19:49 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:19:50 2012] Setting source spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 27 05:19:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 28 22:37:21 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:21 2012] Error reading totcts from fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 28 22:37:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:22 2012] Using photon index=1.80, rate=0.0282, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src7.arf
[Mon May 28 22:37:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 6.3e-13
[Mon May 28 22:37:24 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Mon May 28 22:37:24 2012] Flag c found in src. 7 procflags, skipping spectral fitting