[Fri May 25 02:36:50 2012] Detection parameters:
  Position = (238.5, 100.1) = 18 1 15.44 -25 4 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11350.5 +/- 135.3
  Background counts = 127.0
  Rate = 2 +/- 0.02

[Fri May 25 02:36:50 2012] Off-axis axis estimate = 15.02'
[Fri May 25 07:00:05 2012] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:00:05 2012] Initial guess for spatial extent in simple fitting = 13.94"
[Fri May 25 07:00:05 2012] source mask rpix=3.2, npix_max = 54, mask sum = 48, frac = 0.874
[Fri May 25 07:00:05 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.94"
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src6.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src6.csv
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src6.csv
[Fri May 25 20:33:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri May 25 20:33:12 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat May 26 08:11:49 2012] Spatial fit model total counts = 57800.000000, observed total counts = 55175.000000
[Sat May 26 08:11:49 2012] Offset between fit and detection position for source 53 = 6.344300 pixels
[Sat May 26 08:11:49 2012] 54575.520018 total counts/ 0.520018 bgd. counts: snr = 75680.598177
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 6.344300 pixels
  Position = (239.6, 106.3) = 18 1 15.08 -25 3 58.3
  Extent = 25.8 (25.8-25.8)", rotation angle = 0
  Source counts = 54575.0 +/- 233.6
  Background counts = 0.5
  Rate = 7 +/- 0.03
[Sat May 26 08:11:49 2012] Spatial fit model total counts = 10767.800000, observed total counts = 10774.000000
[Sat May 26 08:11:49 2012] Offset between fit and detection position for source 53 = 4.030583 pixels
[Sat May 26 08:11:49 2012] Warning, changing simple spatial fit ID from 6 to 8
[Sat May 26 08:11:49 2012] 10555.710000 total counts/ 9306.560000 bgd. counts: snr = 12.948516
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 4.030583 pixels
  Position = (235.9, 104.8) = 18 1 16.27 -25 4 4.9
  Extent = 27.3 (27.2-27.3)", rotation angle = 0
  Source counts = 1249.2 +/- 102.7
  Background counts = 9306.6
  Rate = 0.2 +/- 0.01
[Sat May 26 08:11:49 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:49 2012] Assessing source extent using major axis lower bound
[Sat May 26 08:11:49 2012] Source does appear to be extended
[Sat May 26 08:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:49 2012] Source is confused with source 2
[Sat May 26 12:18:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 12:18:12 2012] Initial guess for spatial extent in simple fitting = 27.25"
[Sat May 26 12:18:12 2012] source mask rpix=6.3, npix_max = 183, mask sum = 182, frac = 0.994
[Sat May 26 12:18:12 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 27.25"
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src5.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src5.csv
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src5.csv
[Sat May 26 23:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat May 26 23:42:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May 26 23:42:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat May 26 23:42:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:46 2012] Warning, spatial fit 5 centroid is now closest to src. 43
[Sun May 27 03:12:46 2012] Spatial fit model total counts = 10778.200000, observed total counts = 10774.000000
[Sun May 27 03:12:46 2012] Offset between fit and detection position for source 53 = 0.173384 pixels
[Sun May 27 03:12:46 2012] Warning, changing simple spatial fit ID from 5 to 7
[Sun May 27 03:12:46 2012] 10566.690000 total counts/ 9273.740000 bgd. counts: snr = 13.426236
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.173384 pixels
  Position = (235.7, 104.8) = 18 1 16.33 -25 4 4.9
  Extent = 27.3 (27.2-54.5)", rotation angle = 0
  Source counts = 1293.0 +/- 102.8
  Background counts = 9273.7
  Rate = 0.2 +/- 0.01
[Sun May 27 03:12:46 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:46 2012] Assessing source extent using major axis lower bound
[Sun May 27 03:12:46 2012] Source does appear to be extended
[Sun May 27 03:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 04:50:26 2012] Counts = 1292.950000, rescaling region sizes by 2.000000
[Sun May 27 04:50:26 2012] XMMSAS src. selection expression = ellipse(20456.084000, 9071.736000, 3271.008094, 3271.008094, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing source region out to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src53_src.reg
[Sun May 27 04:50:26 2012] Extracting stamp from image fullrun_mos1_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (48, 0) - (424, 293)
[Sun May 27 04:50:26 2012] XMMSAS bgd. selection expression = annulus(20456.084000, 9071.736000, 10903.360314, 21806.720627, X, Y) && !ellipse(21959.256000, 8220.130800, 8114.784234, 6507.432187, 203.247000, X, Y) && !ellipse(23624.468800, 8262.939200, 3966.840114, 3966.840114, 0.000000, X, Y) && !ellipse(23266.312200, 8166.190600, 6716.112193, 6716.112193, 0.000000, X, Y) && !ellipse(22805.420000, 8479.826000, 7972.056229, 7972.056229, 0.000000, X, Y) && !ellipse(18932.220810, 8826.410011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19516.328583, 9862.377884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.826200, 12320.540000, 1110.896032, 1110.896032, 0.000000, X, Y) && !ellipse(22769.928925, 13173.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18750.537155, 10463.248848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22720.170000, 17331.912000, 1370.152039, 1370.152039, 0.000000, X, Y) && !ellipse(22694.982758, 16829.750900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.032196, 15704.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22688.939911, 13861.890121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.036469, 16400.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22604.942749, 14576.377090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22643.119415, 15267.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.692000, 11372.960000, 1951.456056, 1951.456056, 0.000000, X, Y) && !ellipse(21543.362473, 11941.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19534.048248, 11073.705795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22830.883926, 31638.414000, 1465.216042, 1465.216042, 0.000000, X, Y) && !ellipse(22758.778200, 29283.732000, 2589.024074, 1020.704029, 90.000000, X, Y) && !ellipse(22801.520800, 28835.458000, 1294.512037, 1294.512037, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src53.gif
[Sun May 27 05:08:57 2012] Mean detx,y = (15787.90, 2363.40) 
[Sun May 27 05:09:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:13:34 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:13:35 2012] Setting source spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun May 27 05:13:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon May 28 22:37:21 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:21 2012] Error reading totcts from fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon May 28 22:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:21 2012] Using photon index=1.80, rate=0.177, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src53.arf
[Mon May 28 22:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:21 2012] Updating source flux to 3.8e-12
[Mon May 28 22:37:24 2012] Flag c found in src. 53 procflags, skipping spectral fitting