[Fri May 25 02:36:50 2012] Detection parameters:
  Position = (218.2, 102.0) = 18 1 21.94 -25 4 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1561.3 +/- 55.5
  Background counts = 138.3
  Rate = 0.2 +/- 0.008

[Fri May 25 02:36:50 2012] Off-axis axis estimate = 15.38'
[Fri May 25 07:00:05 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:00:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 07:00:05 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Fri May 25 07:00:05 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.140
[Fri May 25 07:00:05 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 14.12"
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src7.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src7.csv
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src7.csv
[Fri May 25 20:33:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri May 25 20:33:12 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat May 26 08:11:49 2012] Warning, spatial fit 7 centroid is now closest to src. 51
[Sat May 26 08:11:49 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:49 2012] Assessing source extent using major
[Sat May 26 08:11:49 2012] Source does appear to be extended
[Sat May 26 08:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:49 2012] Source is confused with source 53
[Sat May 26 12:18:12 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Sat May 26 12:18:12 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Sat May 26 12:18:12 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.140
[Sat May 26 12:18:12 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.12"
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src6.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src6.csv
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src6.csv
[Sat May 26 23:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat May 26 23:42:28 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun May 27 03:12:46 2012] Warning, spatial fit 6 centroid is now closest to src. 51
[Sun May 27 03:12:46 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:46 2012] Assessing source extent using major
[Sun May 27 03:12:46 2012] Source does appear to be extended
[Sun May 27 03:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 04:50:26 2012] Counts = 1561.261353, rescaling region sizes by 2.000000
[Sun May 27 04:50:26 2012] XMMSAS src. selection expression = ellipse(18932.220810, 8826.410011, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing source region out to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src52_src.reg
[Sun May 27 04:50:26 2012] Extracting stamp from image fullrun_mos1_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (143, 27) - (293, 177)
[Sun May 27 04:50:26 2012] XMMSAS bgd. selection expression = annulus(18932.220810, 8826.410011, 4350.000000, 8700.000000, X, Y) && !ellipse(21959.256000, 8220.130800, 8114.784234, 6507.432187, 203.247000, X, Y) && !ellipse(23624.468800, 8262.939200, 3966.840114, 3966.840114, 0.000000, X, Y) && !ellipse(23266.312200, 8166.190600, 6716.112193, 6716.112193, 0.000000, X, Y) && !ellipse(22805.420000, 8479.826000, 7972.056229, 7972.056229, 0.000000, X, Y) && !ellipse(20456.084000, 9071.736000, 2180.672063, 2180.672063, 0.000000, X, Y) && !ellipse(19516.328583, 9862.377884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.826200, 12320.540000, 1110.896032, 1110.896032, 0.000000, X, Y) && !ellipse(22769.928925, 13173.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18750.537155, 10463.248848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22720.170000, 17331.912000, 1370.152039, 1370.152039, 0.000000, X, Y) && !ellipse(22694.982758, 16829.750900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.032196, 15704.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22688.939911, 13861.890121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.036469, 16400.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22604.942749, 14576.377090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22643.119415, 15267.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.692000, 11372.960000, 1951.456056, 1951.456056, 0.000000, X, Y) && !ellipse(21543.362473, 11941.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19534.048248, 11073.705795, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src52.gif
[Sun May 27 05:13:43 2012] Mean detx,y = (15499.17, 5053.18) 
[Sun May 27 05:13:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:14:18 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:14:18 2012] Setting source spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun May 27 05:14:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sun May 27 05:48:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 05:48:33 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:21 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:21 2012] Error reading totcts from fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon May 28 22:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:21 2012] Using photon index=1.80, rate=0.213, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src52.arf
[Mon May 28 22:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:21 2012] Updating source flux to 5.4e-12
[Mon May 28 22:37:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting