[Fri May 25 02:36:50 2012] Detection parameters:
  Position = (224.9, 113.9) = 18 1 19.79 -25 3 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1114.6 +/- 50.7
  Background counts = 192.6
  Rate = 0.2 +/- 0.007

[Fri May 25 02:36:50 2012] Off-axis axis estimate = 14.40'
[Fri May 25 07:00:05 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:00:05 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Fri May 25 07:00:05 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.212
[Fri May 25 07:00:05 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.63"
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src8.csv
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src8.csv
[Fri May 25 20:33:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 25 20:33:12 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat May 26 08:11:49 2012] Source 51 is offset by -5.601373 and -1.566323 pixels which is larger than
2 X fitted extent = 1.623058 x 1.623058, not incorporating fit results
[Sat May 26 08:11:49 2012] Warning, spatial fit 8 centroid is now closest to src. 53
[Sat May 26 08:11:49 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:49 2012] Assessing source extent using major
[Sat May 26 08:11:49 2012] Source does appear to be extended
[Sat May 26 08:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:49 2012] Source is confused with source 53
[Sat May 26 12:18:12 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Sat May 26 12:18:12 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Sat May 26 12:18:12 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.212
[Sat May 26 12:18:12 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.63"
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src7.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src7.csv
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src7.csv
[Sat May 26 23:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat May 26 23:42:28 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 27 03:12:46 2012] Source 51 is offset by -5.601373 and -1.566323 pixels which is larger than
2 X fitted extent = 1.623058 x 1.623058, not incorporating fit results
[Sun May 27 03:12:46 2012] Warning, spatial fit 7 centroid is now closest to src. 53
[Sun May 27 03:12:46 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:46 2012] Assessing source extent using major
[Sun May 27 03:12:46 2012] Source does appear to be extended
[Sun May 27 03:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 04:50:26 2012] Counts = 1114.608887, rescaling region sizes by 2.000000
[Sun May 27 04:50:26 2012] XMMSAS src. selection expression = ellipse(19516.328583, 9862.377884, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing source region out to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src51_src.reg
[Sun May 27 04:50:26 2012] Extracting stamp from image fullrun_mos1_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (150, 39) - (300, 189)
[Sun May 27 04:50:26 2012] XMMSAS bgd. selection expression = annulus(19516.328583, 9862.377884, 4350.000000, 8700.000000, X, Y) && !ellipse(21959.256000, 8220.130800, 8114.784234, 6507.432187, 203.247000, X, Y) && !ellipse(23624.468800, 8262.939200, 3966.840114, 3966.840114, 0.000000, X, Y) && !ellipse(23266.312200, 8166.190600, 6716.112193, 6716.112193, 0.000000, X, Y) && !ellipse(22805.420000, 8479.826000, 7972.056229, 7972.056229, 0.000000, X, Y) && !ellipse(20456.084000, 9071.736000, 2180.672063, 2180.672063, 0.000000, X, Y) && !ellipse(18932.220810, 8826.410011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.826200, 12320.540000, 1110.896032, 1110.896032, 0.000000, X, Y) && !ellipse(22769.928925, 13173.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18750.537155, 10463.248848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22720.170000, 17331.912000, 1370.152039, 1370.152039, 0.000000, X, Y) && !ellipse(22694.982758, 16829.750900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.032196, 15704.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22688.939911, 13861.890121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.036469, 16400.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22604.942749, 14576.377090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22643.119415, 15267.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.692000, 11372.960000, 1951.456056, 1951.456056, 0.000000, X, Y) && !ellipse(21543.362473, 11941.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19534.048248, 11073.705795, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src51.gif
[Sun May 27 05:14:26 2012] Mean detx,y = (14916.99, 4787.68) 
[Sun May 27 05:14:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:15:08 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:15:08 2012] Setting source spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun May 27 05:15:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun May 27 05:48:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 05:48:55 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:21 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:21 2012] Error reading totcts from fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Mon May 28 22:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:21 2012] Using photon index=1.80, rate=0.152, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src51.arf
[Mon May 28 22:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 3.2e-12
[Mon May 28 22:37:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting