[Fri May 25 02:36:50 2012] Detection parameters:
  Position = (261.3, 159.9) = 18 1 8.11 -25 0 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.9 +/- 28.0
  Background counts = 242.2
  Rate = 0.05 +/- 0.007

[Fri May 25 02:36:50 2012] Off-axis axis estimate = 10.40'
[Fri May 25 07:00:05 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:00:05 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Fri May 25 07:00:05 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.043
[Fri May 25 07:00:05 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.63"
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src15.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src15.csv
[Fri May 25 20:33:11 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri May 25 20:33:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src15.csv
[Fri May 25 20:33:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May 25 20:33:12 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat May 26 08:11:49 2012] Source 37 is offset by 0.440960 and -3.463838 pixels which is larger than
2 X fitted extent = 1.367485 x 1.367485, not incorporating fit results
[Sat May 26 08:11:49 2012] Warning, spatial fit 15 centroid is now closest to src. 36
[Sat May 26 08:11:49 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:49 2012] Assessing source extent using major
[Sat May 26 08:11:49 2012] Source does appear to be extended
[Sat May 26 08:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 12:18:12 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Sat May 26 12:18:12 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Sat May 26 12:18:12 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.043
[Sat May 26 12:18:12 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 11.63"
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src14.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src14.csv
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src14.csv
[Sat May 26 23:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat May 26 23:42:28 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun May 27 03:12:46 2012] Warning, spatial fit 14 centroid is now closest to src. 36
[Sun May 27 03:12:46 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:46 2012] Assessing source extent using major
[Sun May 27 03:12:46 2012] Source does appear to be extended
[Sun May 27 03:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 04:50:26 2012] XMMSAS src. selection expression = ellipse(22688.939911, 13861.890121, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing source region out to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src37_src.reg
[Sun May 27 04:50:26 2012] Extracting stamp from image fullrun_mos1_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (224, 122) - (299, 197)
[Sun May 27 04:50:26 2012] XMMSAS bgd. selection expression = annulus(22688.939911, 13861.890121, 1087.500000, 2175.000000, X, Y) && !ellipse(21959.256000, 8220.130800, 8114.784234, 6507.432187, 203.247000, X, Y) && !ellipse(23624.468800, 8262.939200, 3966.840114, 3966.840114, 0.000000, X, Y) && !ellipse(23266.312200, 8166.190600, 6716.112193, 6716.112193, 0.000000, X, Y) && !ellipse(22805.420000, 8479.826000, 7972.056229, 7972.056229, 0.000000, X, Y) && !ellipse(22645.826200, 12320.540000, 1110.896032, 1110.896032, 0.000000, X, Y) && !ellipse(22769.928925, 13173.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22720.170000, 17331.912000, 1370.152039, 1370.152039, 0.000000, X, Y) && !ellipse(22694.982758, 16829.750900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.032196, 15704.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.036469, 16400.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22604.942749, 14576.377090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22643.119415, 15267.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.692000, 11372.960000, 1951.456056, 1951.456056, 0.000000, X, Y) && !ellipse(21543.362473, 11941.036163, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src37.gif
[Sun May 27 05:17:02 2012] Mean detx,y = (10705.44, 1815.91) 
[Sun May 27 05:17:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:17:13 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:17:13 2012] Setting source spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May 27 05:17:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun May 27 05:56:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 05:56:09 2012] rmf not generated due to insufficient counts
[Mon May 28 22:37:21 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:21 2012] Error reading totcts from fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Mon May 28 22:37:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:22 2012] Using photon index=1.80, rate=0.0495, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src37.arf
[Mon May 28 22:37:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:22 2012] Updating source flux to 8.6e-13
[Mon May 28 22:37:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting