[Fri May 25 02:36:50 2012] Detection parameters:
  Position = (264.7, 100.0) = 18 1 7.05 -25 4 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54560.4 +/- 278.8
  Background counts = 118.6
  Rate = 7 +/- 0.04

[Fri May 25 02:36:50 2012] Off-axis axis estimate = 14.59'
[Fri May 25 07:00:05 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:00:05 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Fri May 25 07:00:05 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.048
[Fri May 25 07:00:05 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.73"
[Fri May 25 20:33:10 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 25 20:33:10 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 25 20:33:10 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 25 20:33:12 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 26 08:11:48 2012] Spatial fit model total counts = 204978.000000, observed total counts = 204429.000000
[Sat May 26 08:11:48 2012] Offset between fit and detection position for source 2 = 7.794640 pixels
[Sat May 26 08:11:48 2012] 190381.000000 total counts/ 36100.000000 bgd. counts: snr = 812.005263
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 7.794640 pixels
  Position = (256.9, 100.4) = 18 1 9.54 -25 4 24.4
  Extent = 27.5 (27.4-54.9)", rotation angle = 0
  Source counts = 154281.0 +/- 436.3
  Background counts = 36100.0
  Rate = 2e+01 +/- 0.06
[Sat May 26 08:11:49 2012] Spatial fit model total counts = 198300.000000, observed total counts = 206662.000000
[Sat May 26 08:11:49 2012] Offset between fit and detection position for source 2 = 6.892205 pixels
[Sat May 26 08:11:49 2012] Warning, changing simple spatial fit ID from 2 to 5
[Sat May 26 08:11:49 2012] 182022.000000 total counts/ 40000.000000 bgd. counts: snr = 710.110000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.892205 pixels
  Position = (252.3, 95.2) = 18 1 11.01 -25 4 46.7
  Extent = 28.1 (28.0-56.1)", rotation angle = 0
  Source counts = 142022.0 +/- 426.6
  Background counts = 40000.0
  Rate = 2e+01 +/- 0.06
[Sat May 26 08:11:49 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:49 2012] Assessing source extent using major axis lower bound
[Sat May 26 08:11:49 2012] Source does appear to be extended
[Sat May 26 08:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:49 2012] Source is confused with source 10
[Sat May 26 08:11:49 2012] Source is confused with source 35
[Sat May 26 08:11:49 2012] Source is confused with source 53
[Sat May 26 12:18:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 12:18:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 12:18:12 2012] Initial guess for spatial extent in simple fitting = 28.06"
[Sat May 26 12:18:12 2012] source mask rpix=6.5, npix_max = 193, mask sum = 196, frac = 1.014
[Sat May 26 12:18:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 28.06"
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src1.csv
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src1.csv
[Sat May 26 23:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 26 23:42:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 26 23:42:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 26 23:42:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:12:46 2012] Spatial fit model total counts = 484499.000000, observed total counts = 428193.000000
[Sun May 27 03:12:46 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 03:12:46 2012] Spatial fit model total counts = 197366.000000, observed total counts = 206662.000000
[Sun May 27 03:12:46 2012] Offset between fit and detection position for source 2 = 0.696173 pixels
[Sun May 27 03:12:46 2012] Warning, changing simple spatial fit ID from 1 to 4
[Sun May 27 03:12:46 2012] 171513.668300 total counts/ 19.668300 bgd. counts: snr = 38669.229455
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.696173 pixels
  Position = (253.0, 95.0) = 18 1 10.80 -25 4 47.5
  Extent = 33.8 (33.7-34.1)" x 27.1 (27.1-27.2)", rotation angle = 203 (203-204) degrees
  Source counts = 171494.0 +/- 414.1
  Background counts = 19.7
  Rate = 2e+01 +/- 0.06
[Sun May 27 03:12:46 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:46 2012] Assessing source extent using major axis lower bound
[Sun May 27 03:12:46 2012] Source does appear to be extended
[Sun May 27 03:12:46 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24
[Sun May 27 04:50:26 2012] Counts = 171494.000000, rescaling region sizes by 3.000000
[Sun May 27 04:50:26 2012] XMMSAS src. selection expression = ellipse(21959.256000, 8220.130800, 6086.088175, 4880.574140, 203.247000, X, Y)
[Sun May 27 04:50:26 2012] Writing source region out to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2_src.reg
[Sun May 27 04:50:26 2012] Extracting stamp from image fullrun_mos1_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (595, 445)
[Sun May 27 04:50:26 2012] XMMSAS bgd. selection expression = annulus(21959.256000, 8220.130800, 30430.440876, 60860.881751, X, Y) && !ellipse(23624.468800, 8262.939200, 3966.840114, 3966.840114, 0.000000, X, Y) && !ellipse(23266.312200, 8166.190600, 6716.112193, 6716.112193, 0.000000, X, Y) && !ellipse(22805.420000, 8479.826000, 7972.056229, 7972.056229, 0.000000, X, Y) && !ellipse(20456.084000, 9071.736000, 2180.672063, 2180.672063, 0.000000, X, Y) && !ellipse(18932.220810, 8826.410011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19516.328583, 9862.377884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.826200, 12320.540000, 1110.896032, 1110.896032, 0.000000, X, Y) && !ellipse(22769.928925, 13173.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18750.537155, 10463.248848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22720.170000, 17331.912000, 1370.152039, 1370.152039, 0.000000, X, Y) && !ellipse(22694.982758, 16829.750900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.032196, 15704.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22688.939911, 13861.890121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.036469, 16400.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22604.942749, 14576.377090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22643.119415, 15267.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.692000, 11372.960000, 1951.456056, 1951.456056, 0.000000, X, Y) && !ellipse(21543.362473, 11941.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22906.927800, 34410.608000, 1651.760048, 1651.760048, 0.000000, X, Y) && !ellipse(22891.062000, 33963.228000, 1616.560047, 1616.560047, 0.000000, X, Y) && !ellipse(22764.155800, 38761.760200, 1109.640032, 1109.640032, 0.000000, X, Y) && !ellipse(19534.048248, 11073.705795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22779.691467, 39798.986816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22823.523346, 36053.664429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.860901, 41192.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22870.120400, 39375.112000, 1914.120055, 1914.120055, 0.000000, X, Y) && !ellipse(22813.968480, 36487.580000, 1735.184050, 1332.424038, 89.536000, X, Y) && !ellipse(22761.373817, 36934.172288, 2589.024074, 1213.206866, 93.492041, X, Y) && !ellipse(22792.133400, 38169.681000, 1629.776047, 1629.776047, 0.000000, X, Y) && !ellipse(22756.932556, 37704.521820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22830.883926, 31638.414000, 1465.216042, 1465.216042, 0.000000, X, Y) && !ellipse(22758.778200, 29283.732000, 2589.024074, 1020.704029, 90.000000, X, Y) && !ellipse(22801.520800, 28835.458000, 1294.512037, 1294.512037, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2.gif
[Sun May 27 04:50:54 2012] Mean detx,y = (15671.81, 1729.29) 
[Sun May 27 04:50:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 04:53:47 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 04:53:48 2012] Setting source spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 27 04:53:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 28 22:37:21 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:21 2012] Error reading totcts from fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 22:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:21 2012] Using photon index=1.80, rate=23.5, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2.arf
[Mon May 28 22:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:21 2012] Updating source flux to 5.5e-10
[Mon May 28 22:37:24 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon May 28 22:37:24 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon May 28 22:42:31 2012] Reading fit data from xmm0103261901/analysis//spectral/fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2_pl.csv
[Mon May 28 22:42:31 2012] Spectral fit parameter nH value = 3.53255e+22
[Mon May 28 22:42:31 2012] Spectral fit parameter PhoIndex value = 1.91904
[Mon May 28 22:42:31 2012] Failed to get F(0.3-8.0) from xmm0103261901/analysis//spectral/fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon May 28 22:42:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:42:31 2012] Using Nh = 3.5e+22, photon index=1.92, rate=23.5, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src2.arf
[Mon May 28 22:42:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:42:31 2012] Updating source flux to 1.3e-09