[Fri May 25 02:36:50 2012] Detection parameters:
  Position = (267.2, 92.1) = 18 1 6.23 -25 4 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31235.8 +/- 262.9
  Background counts = 83.7
  Rate = 4 +/- 0.04

[Fri May 25 02:36:50 2012] Off-axis axis estimate = 15.13'
[Fri May 25 07:00:05 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Fri May 25 07:00:05 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Fri May 25 07:00:05 2012] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.869
[Fri May 25 07:00:05 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.99"
[Fri May 25 20:33:10 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src4.ximg exists
[Fri May 25 20:33:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src4.csv
[Fri May 25 20:33:10 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May 25 20:33:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src4.csv
[Fri May 25 20:33:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May 25 20:33:12 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 25 20:33:12 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat May 26 08:11:48 2012] Spatial fit model total counts = 161957.000000, observed total counts = 168031.000000
[Sat May 26 08:11:49 2012] Offset between fit and detection position for source 10 = 2.400363 pixels
[Sat May 26 08:11:49 2012] 141469.000000 total counts/ 36100.000000 bgd. counts: snr = 554.573684
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.400363 pixels
  Position = (268.0, 94.4) = 18 1 5.99 -25 4 50.2
  Extent = 28.0 (27.9-56.0)", rotation angle = 0
  Source counts = 105369.0 +/- 376.1
  Background counts = 36100.0
  Rate = 1e+01 +/- 0.05
[Sat May 26 08:11:49 2012] Vigneting correction estimate = 1.000000
[Sat May 26 08:11:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 08:11:49 2012] Assessing source extent using major axis lower bound
[Sat May 26 08:11:49 2012] Source does appear to be extended
[Sat May 26 08:11:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 08:11:49 2012] Source is confused with source 2
[Sat May 26 12:18:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 12:18:12 2012] Initial guess for spatial extent in simple fitting = 27.98"
[Sat May 26 12:18:12 2012] source mask rpix=6.4, npix_max = 192, mask sum = 186, frac = 0.967
[Sat May 26 12:18:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 27.98"
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src3.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src3.csv
[Sat May 26 23:42:27 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May 26 23:42:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src3.csv
[Sat May 26 23:42:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May 26 23:42:28 2012] fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May 26 23:42:28 2012] Fit fullrun_mos1_xmm0103261901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 27 03:12:46 2012] Warning, spatial fit 3 centroid is now closest to src. 35
[Sun May 27 03:12:46 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:12:46 2012] Assessing source extent using major axis lower bound
[Sun May 27 03:12:46 2012] Source does appear to be extended
[Sun May 27 03:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 04:50:26 2012] Counts = 105369.000000, rescaling region sizes by 3.000000
[Sun May 27 04:50:26 2012] XMMSAS src. selection expression = ellipse(23266.312200, 8166.190600, 5037.084145, 5037.084145, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing source region out to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src10_src.reg
[Sun May 27 04:50:26 2012] Extracting stamp from image fullrun_mos1_xmm0103261901_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (557, 384)
[Sun May 27 04:50:26 2012] XMMSAS bgd. selection expression = annulus(23266.312200, 8166.190600, 25185.420725, 50370.841449, X, Y) && !ellipse(21959.256000, 8220.130800, 8114.784234, 6507.432187, 203.247000, X, Y) && !ellipse(23624.468800, 8262.939200, 3966.840114, 3966.840114, 0.000000, X, Y) && !ellipse(22805.420000, 8479.826000, 7972.056229, 7972.056229, 0.000000, X, Y) && !ellipse(20456.084000, 9071.736000, 2180.672063, 2180.672063, 0.000000, X, Y) && !ellipse(18932.220810, 8826.410011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19516.328583, 9862.377884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.826200, 12320.540000, 1110.896032, 1110.896032, 0.000000, X, Y) && !ellipse(22769.928925, 13173.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18750.537155, 10463.248848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22720.170000, 17331.912000, 1370.152039, 1370.152039, 0.000000, X, Y) && !ellipse(22694.982758, 16829.750900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22722.032196, 15704.193710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22688.939911, 13861.890121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22676.036469, 16400.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22604.942749, 14576.377090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22643.119415, 15267.264832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.692000, 11372.960000, 1951.456056, 1951.456056, 0.000000, X, Y) && !ellipse(21543.362473, 11941.036163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22906.927800, 34410.608000, 1651.760048, 1651.760048, 0.000000, X, Y) && !ellipse(22891.062000, 33963.228000, 1616.560047, 1616.560047, 0.000000, X, Y) && !ellipse(22764.155800, 38761.760200, 1109.640032, 1109.640032, 0.000000, X, Y) && !ellipse(19534.048248, 11073.705795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22779.691467, 39798.986816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22823.523346, 36053.664429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.860901, 41192.638245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22870.120400, 39375.112000, 1914.120055, 1914.120055, 0.000000, X, Y) && !ellipse(22813.968480, 36487.580000, 1735.184050, 1332.424038, 89.536000, X, Y) && !ellipse(22761.373817, 36934.172288, 2589.024074, 1213.206866, 93.492041, X, Y) && !ellipse(22792.133400, 38169.681000, 1629.776047, 1629.776047, 0.000000, X, Y) && !ellipse(22756.932556, 37704.521820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22830.883926, 31638.414000, 1465.216042, 1465.216042, 0.000000, X, Y) && !ellipse(22758.778200, 29283.732000, 2589.024074, 1020.704029, 90.000000, X, Y) && !ellipse(22801.520800, 28835.458000, 1294.512037, 1294.512037, 0.000000, X, Y)
[Sun May 27 04:50:26 2012] Writing fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src10.gif
[Sun May 27 05:00:06 2012] Mean detx,y = (15700.13, 1682.10) 
[Sun May 27 05:00:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:04:44 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:04:44 2012] Setting source spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 27 05:04:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon May 28 22:37:21 2012] Updating aperture counts using extracted products
[Mon May 28 22:37:21 2012] Error reading totcts from fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 28 22:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:37:21 2012] Using photon index=1.80, rate=14.4, arf fullrun_mos1_xmm0103261901_pi300-10000_pass1_cl_src10.arf
[Mon May 28 22:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:37:21 2012] Updating source flux to 3.5e-10
[Mon May 28 22:37:24 2012] Flag c found in src. 10 procflags, skipping spectral fitting