[Sat Aug  4 01:03:35 2012] Detection parameters:
  Position = (120.1, 199.2) = 16 39 8.30 -45 59 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.6 +/- 10.6
  Background counts = 18.7
  Rate = 0.006 +/- 0.001

[Sat Aug  4 01:03:35 2012] Off-axis axis estimate = 14.80'
[Sat Aug  4 01:09:33 2012] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 01:09:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 01:09:33 2012] Initial guess for spatial extent in simple fitting = 13.83"
[Sat Aug  4 01:09:33 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.035
[Sat Aug  4 01:09:33 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.83"
[Sat Aug  4 01:14:51 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Aug  4 01:14:51 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Aug  4 01:14:51 2012] Fit fullrun_mos1_xmm0103261101_pi300-10000_cl_pass0_src4 appears to have run properly
[Sat Aug  4 01:14:51 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Aug  4 01:14:51 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Aug  4 01:14:51 2012] Fit fullrun_mos1_xmm0103261101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Aug  4 01:20:11 2012] Spatial fit model total counts = 287.444000, observed total counts = 284.000000
[Sat Aug  4 01:20:11 2012] Offset between fit and detection position for source 2 = 6.285235 pixels
[Sat Aug  4 01:20:11 2012] 284.226000 total counts/ 104.231000 bgd. counts: snr = 17.630393
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.285235 pixels
  Position = (125.5, 196.1) = 16 39 6.02 -45 59 18.7
  Extent = 27.7 (27.6-55.3)", rotation angle = 0
  Source counts = 180.0 +/- 16.9
  Background counts = 104.2
  Rate = 0.02 +/- 0.002
[Sat Aug  4 01:20:11 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 01:20:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 01:20:11 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 01:20:11 2012] Source does appear to be extended
[Sat Aug  4 01:20:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 01:24:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 01:24:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 01:24:49 2012] Initial guess for spatial extent in simple fitting = 27.65"
[Sat Aug  4 01:24:49 2012] source mask rpix=6.4, npix_max = 188, mask sum = 182, frac = 0.968
[Sat Aug  4 01:24:49 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 27.65"
[Sat Aug  4 01:29:28 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_src4.ximg exists
[Sat Aug  4 01:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_src4.csv
[Sat Aug  4 01:29:28 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Aug  4 01:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_src4.csv
[Sat Aug  4 01:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 01:29:28 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Aug  4 01:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Aug  4 01:29:28 2012] fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Aug  4 01:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Aug  4 01:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103261101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 01:34:08 2012] Warning, spatial fit 4 centroid is now closest to src. 1
[Sat Aug  4 01:34:08 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 01:34:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 01:34:08 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 01:34:08 2012] Source does appear to be extended
[Sat Aug  4 01:34:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 01:36:53 2012] XMMSAS src. selection expression = ellipse(10873.668000, 17014.752000, 1659.228048, 1659.228048, 0.000000, X, Y)
[Sat Aug  4 01:36:53 2012] Writing source region out to fullrun_mos1_xmm0103261101_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug  4 01:36:53 2012] Extracting stamp from image fullrun_mos1_xmm0103261101_pi300-10000_cl_sm2.00.img.gz, (30, 101) - (221, 291)
[Sat Aug  4 01:36:53 2012] XMMSAS bgd. selection expression = annulus(10873.668000, 17014.752000, 2765.380080, 5530.760159, X, Y)
[Sat Aug  4 01:36:53 2012] Writing fullrun_mos1_xmm0103261101_pi300-10000_pass1_cl_src2.gif
[Sat Aug  4 01:37:36 2012] Mean detx,y = (6101.59, 14258.71) 
[Sat Aug  4 01:37:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 01:38:19 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 01:38:19 2012] Setting source spectrum file to fullrun_mos1_xmm0103261101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 01:38:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103261101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug  4 01:46:41 2012] Updating aperture counts using extracted products
[Sat Aug  4 01:46:41 2012] Error reading totcts from fullrun_mos1_xmm0103261101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug  4 01:46:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 01:46:41 2012] Using photon index=1.80, rate=0.024, arf fullrun_mos1_xmm0103261101_pi300-10000_pass1_cl_src2.arf
[Sat Aug  4 01:46:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 01:46:41 2012] Updating source flux to 4.5e-13
[Sat Aug  4 01:47:01 2012] xmm0103261101/analysis//spectral/fullrun_mos1_xmm0103261101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete