[Sat Aug 11 10:56:23 2012] Detection parameters:
  Position = (356.0, 316.2) = 12 23 40.64 -64 8 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 10.6
  Background counts = 2.2
  Rate = 0.01 +/- 0.002

[Sat Aug 11 10:56:23 2012] Off-axis axis estimate = 4.37'
[Sat Aug 11 11:20:14 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 11:20:14 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Sat Aug 11 11:20:14 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.813
[Sat Aug 11 11:20:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.61"
[Sat Aug 11 11:28:31 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 11 11:28:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 11:28:31 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 11 11:28:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 11:28:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 11:28:31 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 11 11:28:31 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 11 11:28:31 2012] Fit fullrun_mos2_xmm0103260901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug 11 11:28:37 2012] Spatial fit model total counts = 89.088200, observed total counts = 89.000000
[Sat Aug 11 11:28:37 2012] Offset between fit and detection position for source 3 = 0.172063 pixels
[Sat Aug 11 11:28:37 2012] 90.173800 total counts/ 42.104400 bgd. counts: snr = 7.408068
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.172063 pixels
  Position = (355.9, 316.3) = 12 23 40.72 -64 8 13.9
  Extent = 4.6 (3.5-6.4)", rotation angle = 0
  Source counts = 48.1 +/- 9.5
  Background counts = 42.1
  Rate = 0.007 +/- 0.001
[Sat Aug 11 11:28:37 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 11:28:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 11:28:37 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 11:28:37 2012] Source does appear to be extended
[Sat Aug 11 11:28:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 11:50:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 11:50:34 2012] Initial guess for spatial extent in simple fitting = 4.60"
[Sat Aug 11 11:50:34 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.928
[Sat Aug 11 11:50:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.60"
[Sat Aug 11 12:09:06 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug 11 12:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 12:09:06 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug 11 12:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 12:09:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 12:09:06 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug 11 12:09:06 2012] fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug 11 12:09:06 2012] Fit fullrun_mos2_xmm0103260901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Aug 11 12:09:15 2012] Spatial fit model total counts = 89.087700, observed total counts = 89.000000
[Sat Aug 11 12:09:15 2012] Offset between fit and detection position for source 3 = 0.000489 pixels
[Sat Aug 11 12:09:15 2012] 90.173100 total counts/ 42.124000 bgd. counts: snr = 7.403217
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000489 pixels
  Position = (355.9, 316.3) = 12 23 40.72 -64 8 13.9
  Extent = 4.6 (3.5-6.7)", rotation angle = 0
  Source counts = 48.0 +/- 9.5
  Background counts = 42.1
  Rate = 0.007 +/- 0.001
[Sat Aug 11 12:09:15 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 12:09:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 12:09:15 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 12:09:15 2012] Source does appear to be extended
[Sat Aug 11 12:09:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 12:33:36 2012] XMMSAS src. selection expression = ellipse(30912.646920, 27470.215600, 275.610608, 275.610608, 0.000000, X, Y)
[Sat Aug 11 12:33:36 2012] Writing source region out to fullrun_mos2_xmm0103260901_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug 11 12:33:36 2012] Extracting stamp from image fullrun_mos2_xmm0103260901_pi300-10000_cl_sm2.00.img.gz, (340, 300) - (372, 332)
[Sat Aug 11 12:33:36 2012] XMMSAS bgd. selection expression = annulus(30912.646920, 27470.215600, 459.351013, 918.702026, X, Y)
[Sat Aug 11 12:33:36 2012] Writing fullrun_mos2_xmm0103260901_pi300-10000_pass1_cl_src3.gif
[Sat Aug 11 12:37:17 2012] Mean detx,y = (-3382.96, -4161.36) 
[Sat Aug 11 12:37:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 12:37:25 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 12:37:26 2012] Setting source spectrum file to fullrun_mos2_xmm0103260901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 12:37:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103260901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug 11 12:42:39 2012] Not generating rmf since there are only 48 counts
[Sat Aug 11 12:42:39 2012] rmf not generated due to insufficient counts
[Sat Aug 11 12:43:01 2012] Updating aperture counts using extracted products
[Sat Aug 11 12:43:01 2012] Error reading totcts from fullrun_mos2_xmm0103260901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Aug 11 12:43:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 12:43:01 2012] Using photon index=1.80, rate=0.00732, arf fullrun_mos2_xmm0103260901_pi300-10000_pass1_cl_src3.arf
[Sat Aug 11 12:43:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 12:43:01 2012] Updating source flux to 1.1e-13
[Sat Aug 11 12:43:36 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting