[Sat Aug 11 10:56:01 2012] Detection parameters:
  Position = (356.0, 316.2) = 12 23 40.61 -64 8 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.0 +/- 9.3
  Background counts = 2.4
  Rate = 0.01 +/- 0.002

[Sat Aug 11 10:56:01 2012] Off-axis axis estimate = 4.37'
[Sat Aug 11 11:13:25 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 11:13:25 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Sat Aug 11 11:13:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.016
[Sat Aug 11 11:13:25 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.61"
[Sat Aug 11 11:20:14 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 11 11:20:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 11:20:14 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 11 11:20:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_src3.csv
[Sat Aug 11 11:20:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 11:20:14 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 11 11:20:14 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 11 11:20:14 2012] Fit fullrun_mos1_xmm0103260901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Aug 11 11:28:35 2012] Spatial fit model total counts = 73.996000, observed total counts = 74.000000
[Sat Aug 11 11:28:35 2012] Offset between fit and detection position for source 2 = 0.199404 pixels
[Sat Aug 11 11:28:35 2012] 73.329600 total counts/ 37.864200 bgd. counts: snr = 5.763555
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.199404 pixels
  Position = (355.9, 316.3) = 12 23 40.72 -64 8 13.9
  Extent = 3.4 (2.7-4.6)", rotation angle = 0
  Source counts = 35.5 +/- 8.6
  Background counts = 37.9
  Rate = 0.005 +/- 0.001
[Sat Aug 11 11:28:35 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 11:28:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 11:28:35 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 11:28:35 2012] Source does appear to be extended
[Sat Aug 11 11:28:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 11:43:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 11:43:07 2012] Initial guess for spatial extent in simple fitting = 3.42"
[Sat Aug 11 11:43:07 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.906
[Sat Aug 11 11:43:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.42"
[Sat Aug 11 11:50:34 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_src3.ximg exists
[Sat Aug 11 11:50:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 11:50:34 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Aug 11 11:50:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_src3.csv
[Sat Aug 11 11:50:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 11:50:34 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Aug 11 11:50:34 2012] fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Aug 11 11:50:34 2012] Fit fullrun_mos1_xmm0103260901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Aug 11 12:09:13 2012] Spatial fit model total counts = 73.996700, observed total counts = 74.000000
[Sat Aug 11 12:09:13 2012] Offset between fit and detection position for source 2 = 0.001769 pixels
[Sat Aug 11 12:09:13 2012] 73.333100 total counts/ 37.786200 bgd. counts: snr = 5.782759
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001769 pixels
  Position = (355.9, 316.3) = 12 23 40.72 -64 8 13.9
  Extent = 3.4 (2.7-4.6)", rotation angle = 0
  Source counts = 35.5 +/- 8.6
  Background counts = 37.8
  Rate = 0.005 +/- 0.001
[Sat Aug 11 12:09:13 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 12:09:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 12:09:13 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 12:09:13 2012] Source does appear to be extended
[Sat Aug 11 12:09:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 12:24:17 2012] XMMSAS src. selection expression = ellipse(30913.367160, 27468.754200, 206.807406, 206.807406, 0.000000, X, Y)
[Sat Aug 11 12:24:17 2012] Writing source region out to fullrun_mos1_xmm0103260901_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug 11 12:24:17 2012] Extracting stamp from image fullrun_mos1_xmm0103260901_pi300-10000_cl_sm2.00.img.gz, (344, 304) - (368, 328)
[Sat Aug 11 12:24:17 2012] XMMSAS bgd. selection expression = annulus(30913.367160, 27468.754200, 344.679010, 689.358020, X, Y)
[Sat Aug 11 12:24:17 2012] Writing fullrun_mos1_xmm0103260901_pi300-10000_pass1_cl_src2.gif
[Sat Aug 11 12:25:55 2012] Mean detx,y = (-3965.75, 3204.67) 
[Sat Aug 11 12:25:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 12:26:10 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 12:26:10 2012] Setting source spectrum file to fullrun_mos1_xmm0103260901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug 11 12:26:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103260901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug 11 12:33:29 2012] Not generating rmf since there are only 35 counts
[Sat Aug 11 12:33:29 2012] rmf not generated due to insufficient counts
[Sat Aug 11 12:43:01 2012] Updating aperture counts using extracted products
[Sat Aug 11 12:43:01 2012] Error reading totcts from fullrun_mos1_xmm0103260901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Aug 11 12:43:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 12:43:01 2012] Using photon index=1.80, rate=0.00542, arf fullrun_mos1_xmm0103260901_pi300-10000_pass1_cl_src2.arf
[Sat Aug 11 12:43:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 12:43:01 2012] Updating source flux to 9.6e-14
[Sat Aug 11 12:43:02 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting