[Wed Aug 15 11:09:37 2012] Detection parameters:
  Position = (246.9, 271.6) = 9 53 26.25 7 51 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.4 +/- 13.5
  Background counts = 39.4
  Rate = 0.001 +/- 0.0002

[Wed Aug 15 11:09:38 2012] Off-axis axis estimate = 4.22'
[Wed Aug 15 12:12:25 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 12:12:25 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Wed Aug 15 12:12:25 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.948
[Wed Aug 15 12:12:25 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.54"
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src28.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src28.csv
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src28.csv
[Wed Aug 15 13:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:51:03 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Aug 15 13:51:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Aug 15 13:51:03 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Aug 15 13:51:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Aug 15 13:51:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:51:27 2012] Warning, spatial fit 28 centroid is now closest to src. 47
[Wed Aug 15 13:51:27 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:51:27 2012] Assessing source extent using major
[Wed Aug 15 13:51:27 2012] Source does appear to be extended
[Wed Aug 15 13:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 14:23:15 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 14:23:15 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Wed Aug 15 14:23:15 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.948
[Wed Aug 15 14:23:15 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 8.54"
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src28.ximg exists
[Wed Aug 15 15:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src28.csv
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Aug 15 15:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src28.csv
[Wed Aug 15 15:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Aug 15 15:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Aug 15 15:48:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Aug 15 15:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:48:28 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 10.184703 pixels away
[Wed Aug 15 15:48:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 15:48:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 15:48:28 2012] Assessing source extent using major
[Wed Aug 15 15:48:28 2012] Source does appear to be extended
[Wed Aug 15 15:48:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:02:45 2012] XMMSAS src. selection expression = ellipse(21428.505905, 23577.171997, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 17:02:45 2012] Writing source region out to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src45_src.reg
[Wed Aug 15 17:02:45 2012] Extracting stamp from image fullrun_mos2_xmm0103260801_pi300-10000_cl_sm2.00.img.gz, (209, 234) - (284, 309)
[Wed Aug 15 17:02:45 2012] XMMSAS bgd. selection expression = annulus(21428.505905, 23577.171997, 1087.500000, 2175.000000, X, Y) && !ellipse(22616.214600, 22516.803800, 357.953610, 357.953610, 0.000000, X, Y)
[Wed Aug 15 17:02:45 2012] Writing fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src45.gif
[Wed Aug 15 17:12:40 2012] Mean detx,y = (6081.36, -2398.10) 
[Wed Aug 15 17:12:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 17:13:05 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 17:13:05 2012] Setting source spectrum file to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Aug 15 17:13:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Wed Aug 15 18:00:37 2012] Not generating rmf since there are only 75 counts
[Wed Aug 15 18:00:37 2012] rmf not generated due to insufficient counts
[Wed Aug 15 18:04:40 2012] Updating aperture counts using extracted products
[Wed Aug 15 18:04:40 2012] Error reading totcts from fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Aug 15 18:04:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 18:04:41 2012] Using photon index=1.80, rate=0.00124, arf fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src45.arf
[Wed Aug 15 18:04:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 18:04:41 2012] Updating source flux to 1.8e-14
[Wed Aug 15 18:04:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting