[Wed Aug 15 11:09:36 2012] Detection parameters:
  Position = (405.7, 482.7) = 9 52 39.72 8 7 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 803.7 +/- 33.5
  Background counts = 29.7
  Rate = 0.01 +/- 0.0004

[Wed Aug 15 11:09:38 2012] Off-axis axis estimate = 15.46'
[Wed Aug 15 12:12:25 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 12:12:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 12:12:25 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Wed Aug 15 12:12:25 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.869
[Wed Aug 15 12:12:25 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 14.16"
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 13:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 13:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:51:27 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 17.661469 pixels away
[Wed Aug 15 13:51:27 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:51:27 2012] Assessing source extent using major
[Wed Aug 15 13:51:27 2012] Source does appear to be extended
[Wed Aug 15 13:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 14:23:15 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 14:23:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 14:23:15 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Wed Aug 15 14:23:15 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.869
[Wed Aug 15 14:23:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.16"
[Wed Aug 15 15:48:13 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 15 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 15:48:13 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 15 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 15:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 15 15:48:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 15 15:48:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Aug 15 15:48:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:48:28 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 18.615005 pixels away
[Wed Aug 15 15:48:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 15:48:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 15:48:28 2012] Assessing source extent using major
[Wed Aug 15 15:48:28 2012] Source does appear to be extended
[Wed Aug 15 15:48:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:02:45 2012] XMMSAS src. selection expression = ellipse(35248.431213, 41942.227356, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 17:02:45 2012] Writing source region out to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src18_src.reg
[Wed Aug 15 17:02:45 2012] Extracting stamp from image fullrun_mos2_xmm0103260801_pi300-10000_cl_sm2.00.img.gz, (368, 445) - (443, 520)
[Wed Aug 15 17:02:45 2012] XMMSAS bgd. selection expression = annulus(35248.431213, 41942.227356, 1087.500000, 2175.000000, X, Y)
[Wed Aug 15 17:02:45 2012] Writing fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src18.gif
[Wed Aug 15 17:04:03 2012] Mean detx,y = (-12736.71, 10522.47) 
[Wed Aug 15 17:04:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 17:04:36 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 17:04:36 2012] Setting source spectrum file to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Aug 15 17:04:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Aug 15 17:31:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 17:31:54 2012] rmf not generated due to insufficient counts
[Wed Aug 15 18:04:40 2012] Updating aperture counts using extracted products
[Wed Aug 15 18:04:40 2012] Error reading totcts from fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Aug 15 18:04:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 18:04:40 2012] Using photon index=1.80, rate=0.00962, arf fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src18.arf
[Wed Aug 15 18:04:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 18:04:40 2012] Updating source flux to 3.1e-13
[Wed Aug 15 18:04:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting