[Wed Aug 15 11:09:36 2012] Detection parameters:
  Position = (300.3, 342.9) = 9 53 10.59 7 57 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3342.7 +/- 68.9
  Background counts = 41.0
  Rate = 0.05 +/- 0.0009

[Wed Aug 15 11:09:38 2012] Off-axis axis estimate = 3.23'
[Wed Aug 15 12:12:25 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 12:12:25 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Wed Aug 15 12:12:25 2012] source mask rpix=1.8, npix_max = 22, mask sum = 19, frac = 0.861
[Wed Aug 15 12:12:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.04"
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 13:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 13:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 13:51:02 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 13:51:02 2012] Fit fullrun_mos2_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 15 13:51:27 2012] Spatial fit model total counts = 3312.810000, observed total counts = 3197.000000
[Wed Aug 15 13:51:27 2012] Offset between fit and detection position for source 1 = 0.310336 pixels
[Wed Aug 15 13:51:27 2012] 3289.227000 total counts/ 898.437000 bgd. counts: snr = 79.762290
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.310336 pixels
  Position = (300.2, 343.2) = 9 53 10.65 7 57 8.7
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 2390.8 +/- 57.4
  Background counts = 898.4
  Rate = 0.03 +/- 0.0007
[Wed Aug 15 13:51:27 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:51:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:51:27 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 13:51:27 2012] Source does appear to be extended
[Wed Aug 15 13:51:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 14:23:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 14:23:15 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Wed Aug 15 14:23:15 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.089
[Wed Aug 15 14:23:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.05"
[Wed Aug 15 15:48:13 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 15:48:13 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 15:48:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 15:48:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 15:48:14 2012] fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 15:48:14 2012] Fit fullrun_mos2_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 15:48:28 2012] Spatial fit model total counts = 3319.600000, observed total counts = 3197.000000
[Wed Aug 15 15:48:28 2012] Offset between fit and detection position for source 1 = 0.000813 pixels
[Wed Aug 15 15:48:28 2012] 3294.915000 total counts/ 904.845000 bgd. counts: snr = 79.455420
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000813 pixels
  Position = (300.2, 343.2) = 9 53 10.65 7 57 8.7
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 2390.1 +/- 57.4
  Background counts = 904.8
  Rate = 0.03 +/- 0.0007
[Wed Aug 15 15:48:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 15:48:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 15:48:28 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 15:48:28 2012] Source does appear to be extended
[Wed Aug 15 15:48:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:02:45 2012] Counts = 2390.070000, rescaling region sizes by 2.000000
[Wed Aug 15 17:02:45 2012] XMMSAS src. selection expression = ellipse(26065.088120, 29809.321600, 603.897617, 603.897617, 0.000000, X, Y)
[Wed Aug 15 17:02:45 2012] Writing source region out to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 15 17:02:45 2012] Extracting stamp from image fullrun_mos2_xmm0103260801_pi300-10000_cl_sm2.00.img.gz, (265, 308) - (335, 378)
[Wed Aug 15 17:02:45 2012] XMMSAS bgd. selection expression = annulus(26065.088120, 29809.321600, 2012.992058, 4025.984116, X, Y) && !ellipse(26432.595000, 27929.681400, 414.308012, 342.379210, 349.899007, X, Y) && !ellipse(30332.328522, 25955.133057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29075.033600, 26612.206400, 285.036008, 285.036008, 0.000000, X, Y) && !ellipse(26441.268921, 31818.656403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29279.429120, 28732.470000, 367.296802, 367.296802, 0.000000, X, Y)
[Wed Aug 15 17:02:45 2012] Writing fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1.gif
[Wed Aug 15 17:02:54 2012] Mean detx,y = (-192.61, 2002.85) 
[Wed Aug 15 17:02:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 17:03:28 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 17:03:28 2012] Setting source spectrum file to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 17:03:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 15 18:04:40 2012] Updating aperture counts using extracted products
[Wed Aug 15 18:04:40 2012] Error reading totcts from fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 18:04:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 18:04:40 2012] Using photon index=1.80, rate=0.0292, arf fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 18:04:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 18:04:40 2012] Updating source flux to 3.2e-13
[Wed Aug 15 18:06:09 2012] Reading fit data from xmm0103260801/analysis//spectral/fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 15 18:06:09 2012] Spectral fit parameter nH value = 1.95022e+21
[Wed Aug 15 18:06:09 2012] Spectral fit parameter PhoIndex value = 2.06872
[Wed Aug 15 18:06:09 2012] Failed to get F(0.3-8.0) from xmm0103260801/analysis//spectral/fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 15 18:06:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 18:06:09 2012] Using Nh = 2e+21, photon index=2.07, rate=0.0292, arf fullrun_mos2_xmm0103260801_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 18:06:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 18:06:09 2012] Updating source flux to 3.3e-13