[Wed Aug 15 11:08:59 2012] Detection parameters:
  Position = (260.6, 197.1) = 9 53 22.23 7 46 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.8 +/- 10.6
  Background counts = 7.0
  Rate = 0.003 +/- 0.0004

[Wed Aug 15 11:08:59 2012] Off-axis axis estimate = 7.84'
[Wed Aug 15 11:35:45 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 11:35:45 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Wed Aug 15 11:35:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.905
[Wed Aug 15 11:35:45 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.35"
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src7.ximg exists
[Wed Aug 15 12:12:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src7.csv
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Aug 15 12:12:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src7.csv
[Wed Aug 15 12:12:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Aug 15 12:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Aug 15 12:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Aug 15 12:12:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:51:12 2012] Spatial fit model total counts = 130.276000, observed total counts = 118.000000
[Wed Aug 15 13:51:12 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 13:51:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:51:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:51:12 2012] Assessing source extent using major
[Wed Aug 15 13:51:12 2012] Source does appear to be extended
[Wed Aug 15 13:51:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 13:57:44 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 13:57:44 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Wed Aug 15 13:57:44 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.905
[Wed Aug 15 13:57:44 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.35"
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src7.ximg exists
[Wed Aug 15 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src7.csv
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Aug 15 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src7.csv
[Wed Aug 15 14:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Aug 15 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Aug 15 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Aug 15 14:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:48:19 2012] Spatial fit model total counts = 130.276000, observed total counts = 118.000000
[Wed Aug 15 15:48:19 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 15:48:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 15:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 15:48:19 2012] Assessing source extent using major
[Wed Aug 15 15:48:19 2012] Source does appear to be extended
[Wed Aug 15 15:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 16:51:01 2012] XMMSAS src. selection expression = ellipse(22621.072052, 17100.751068, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 16:51:01 2012] Writing source region out to fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src16_src.reg
[Wed Aug 15 16:51:01 2012] Extracting stamp from image fullrun_mos1_xmm0103260801_pi300-10000_cl_sm2.00.img.gz, (223, 160) - (298, 235)
[Wed Aug 15 16:51:01 2012] XMMSAS bgd. selection expression = annulus(22621.072052, 17100.751068, 1087.500000, 2175.000000, X, Y) && !ellipse(21199.795044, 17143.384201, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 16:51:01 2012] Writing fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src16.gif
[Wed Aug 15 16:53:02 2012] Mean detx,y = (-8657.87, -7378.83) 
[Wed Aug 15 16:53:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 16:53:32 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 16:53:32 2012] Setting source spectrum file to fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Aug 15 16:53:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Aug 15 17:01:06 2012] Not generating rmf since there are only 75 counts
[Wed Aug 15 17:01:06 2012] rmf not generated due to insufficient counts
[Wed Aug 15 18:04:39 2012] Updating aperture counts using extracted products
[Wed Aug 15 18:04:39 2012] Error reading totcts from fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Aug 15 18:04:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 18:04:39 2012] Using photon index=1.80, rate=0.00278, arf fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src16.arf
[Wed Aug 15 18:04:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 18:04:39 2012] Updating source flux to 6e-14
[Wed Aug 15 18:04:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting