[Wed Aug 15 11:08:58 2012] Detection parameters:
  Position = (405.3, 482.8) = 9 52 39.85 8 7 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 270.4 +/- 21.3
  Background counts = 6.2
  Rate = 0.01 +/- 0.0008

[Wed Aug 15 11:08:59 2012] Off-axis axis estimate = 15.45'
[Wed Aug 15 11:35:45 2012] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 11:35:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 11:35:45 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Wed Aug 15 11:35:45 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.994
[Wed Aug 15 11:35:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 14.15"
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 12:12:24 2012] Fit fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 12:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 15 12:12:24 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 12:12:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 15 12:12:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:51:12 2012] Spatial fit model total counts = 368.323000, observed total counts = 366.000000
[Wed Aug 15 13:51:12 2012] Offset between fit and detection position for source 1 = 0.511480 pixels
[Wed Aug 15 13:51:12 2012] 376.422500 total counts/ 306.943000 bgd. counts: snr = 3.965773
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.511480 pixels
  Position = (405.8, 482.9) = 9 52 39.70 8 7 16.4
  Extent = 7.5" x 5.8", rotation angle = 25
  Source counts = 69.5 +/- 19.4
  Background counts = 306.9
  Rate = 0.003 +/- 0.0007
[Wed Aug 15 13:51:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:51:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:51:12 2012] Assessing source extent using major
[Wed Aug 15 13:51:12 2012] Source does appear to be extended
[Wed Aug 15 13:51:12 2012] Computing asymmetry using major and minor axis, asym = 1.31
[Wed Aug 15 13:57:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 13:57:44 2012] Initial guess for spatial extent in simple fitting = 6.64"
[Wed Aug 15 13:57:44 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.975
[Wed Aug 15 13:57:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.64"
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 14:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 14:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 14:23:14 2012] fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 14:23:14 2012] Fit fullrun_mos1_xmm0103260801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 15:48:19 2012] Spatial fit model total counts = 303.826000, observed total counts = 285.000000
[Wed Aug 15 15:48:19 2012] Offset between fit and detection position for source 1 = 0.856246 pixels
[Wed Aug 15 15:48:19 2012] 304.698000 total counts/ 132.624000 bgd. counts: snr = 14.941844
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.856246 pixels
  Position = (405.0, 482.7) = 9 52 39.95 8 7 15.6
  Extent = 6.3 (5.4-7.2)", rotation angle = 0
  Source counts = 172.1 +/- 17.5
  Background counts = 132.6
  Rate = 0.006 +/- 0.0006
[Wed Aug 15 15:48:19 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 15:48:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 15:48:19 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 15:48:19 2012] Source does appear to be extended
[Wed Aug 15 15:48:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 16:51:01 2012] XMMSAS src. selection expression = ellipse(35183.013520, 41949.124400, 375.162011, 375.162011, 0.000000, X, Y)
[Wed Aug 15 16:51:01 2012] Writing source region out to fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 15 16:51:01 2012] Extracting stamp from image fullrun_mos1_xmm0103260801_pi300-10000_cl_sm2.00.img.gz, (383, 461) - (427, 504)
[Wed Aug 15 16:51:01 2012] XMMSAS bgd. selection expression = annulus(35183.013520, 41949.124400, 625.270018, 1250.540036, X, Y)
[Wed Aug 15 16:51:01 2012] Writing fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1.gif
[Wed Aug 15 16:51:05 2012] Mean detx,y = (10708.39, 12627.85) 
[Wed Aug 15 16:51:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 16:51:24 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 16:51:24 2012] Setting source spectrum file to fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 16:51:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 15 18:04:39 2012] Updating aperture counts using extracted products
[Wed Aug 15 18:04:39 2012] Error reading totcts from fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 18:04:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 18:04:39 2012] Using photon index=1.80, rate=0.00631, arf fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 18:04:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 18:04:39 2012] Updating source flux to 1.9e-13
[Wed Aug 15 18:04:49 2012] Reading fit data from xmm0103260801/analysis//spectral/fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 15 18:04:49 2012] Spectral fit parameter nH value = 7.19262e+19
[Wed Aug 15 18:04:49 2012] Spectral fit parameter PhoIndex value = 1.50652
[Wed Aug 15 18:04:49 2012] Failed to get F(0.3-8.0) from xmm0103260801/analysis//spectral/fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 15 18:04:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 18:04:49 2012] Using Nh = 7.2e+19, photon index=1.51, rate=0.00631, arf fullrun_mos1_xmm0103260801_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 18:04:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 18:04:49 2012] Updating source flux to 2.2e-13