[Thu May 17 10:50:17 2012] Detection parameters:
  Position = (343.1, 176.5) = 8 26 39.38 26 26 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.9 +/- 9.6
  Background counts = 13.0
  Rate = 0.0009 +/- 0.0002

[Thu May 17 10:50:18 2012] Off-axis axis estimate = 9.42'
[Thu May 17 12:23:44 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Thu May 17 12:23:44 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Thu May 17 12:23:44 2012] source mask rpix=2.6, npix_max = 37, mask sum = 20, frac = 0.534
[Thu May 17 12:23:44 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 11.14"
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src37.ximg exists
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May 17 14:36:21 2012] Fit fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src37 appears to have run properly
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May 17 14:36:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May 17 14:36:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu May 17 14:36:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:36:44 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 12.031999 pixels away
[Thu May 17 14:36:44 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:36:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:36:44 2012] Assessing source extent using major
[Thu May 17 14:36:44 2012] Source does appear to be extended
[Thu May 17 14:36:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 15:35:12 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Thu May 17 15:35:12 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Thu May 17 15:35:12 2012] source mask rpix=2.6, npix_max = 37, mask sum = 20, frac = 0.534
[Thu May 17 15:35:12 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 11.14"
[Thu May 17 17:34:55 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src37.ximg exists
[Thu May 17 17:34:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src37.csv
[Thu May 17 17:34:55 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu May 17 17:34:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src37.csv
[Thu May 17 17:34:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:34:56 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu May 17 17:34:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 17 17:34:56 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu May 17 17:34:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 17 17:34:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:35:18 2012] Source 35 is offset by -8.045558 and 0.096060 pixels which is larger than
2 X fitted extent = 1.022152 x 1.022152, not incorporating fit results
[Thu May 17 17:35:18 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:35:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:35:18 2012] Assessing source extent using major
[Thu May 17 17:35:18 2012] Source does appear to be extended
[Thu May 17 17:35:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 18:24:14 2012] XMMSAS src. selection expression = ellipse(29803.956451, 15304.816238, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 18:24:14 2012] Writing source region out to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src35_src.reg
[Thu May 17 18:24:14 2012] Extracting stamp from image fullrun_mos2_xmm0103260601_pi300-10000_cl_sm2.00.img.gz, (306, 139) - (381, 214)
[Thu May 17 18:24:14 2012] XMMSAS bgd. selection expression = annulus(29803.956451, 15304.816238, 1087.500000, 2175.000000, X, Y) && !ellipse(31090.008940, 15979.904600, 460.292013, 460.292013, 0.000000, X, Y) && !ellipse(27592.370200, 17437.092800, 435.316579, 435.316579, 0.000000, X, Y)
[Thu May 17 18:24:14 2012] Writing fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src35.gif
[Thu May 17 18:41:46 2012] Mean detx,y = (-240.52, -12822.89) 
[Thu May 17 18:41:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 18:42:37 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 18:42:37 2012] Setting source spectrum file to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu May 17 18:42:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu May 17 19:26:53 2012] Not generating rmf since there are only 46 counts
[Thu May 17 19:26:53 2012] rmf not generated due to insufficient counts
[Thu May 17 19:29:50 2012] Updating aperture counts using extracted products
[Thu May 17 19:29:50 2012] Error reading totcts from fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu May 17 19:29:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 19:29:52 2012] Using photon index=1.80, rate=0.000939, arf fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src35.arf
[Thu May 17 19:29:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 19:29:52 2012] Getting flux using calc_pl_flux failed
[Thu May 17 19:30:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting