[Thu May 17 10:50:17 2012] Detection parameters:
  Position = (242.6, 343.4) = 8 27 11.99 26 39 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.4 +/- 9.1
  Background counts = 13.3
  Rate = 0.001 +/- 0.0002

[Thu May 17 10:50:18 2012] Off-axis axis estimate = 5.20'
[Thu May 17 12:23:44 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Thu May 17 12:23:44 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Thu May 17 12:23:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.942
[Thu May 17 12:23:44 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.03"
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src35.ximg exists
[Thu May 17 14:36:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src35.csv
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu May 17 14:36:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src35.csv
[Thu May 17 14:36:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu May 17 14:36:21 2012] Fit fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Thu May 17 14:36:44 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.209166 pixels away
[Thu May 17 14:36:44 2012] Spatial fit model total counts = 192.000000, observed total counts = 192.000000
[Thu May 17 14:36:44 2012] Offset between fit and detection position for source 29 = 0.025919 pixels
[Thu May 17 14:36:44 2012] 163.408600 total counts/ 135.301000 bgd. counts: snr = 2.416425
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.025919 pixels
  Position = (242.5, 343.4) = 8 27 12.00 26 39 6.0
  Extent = 5.4 (2.8-8.8)", rotation angle = 0
  Source counts = 28.1 +/- 12.8
  Background counts = 135.3
  Rate = 0.0006 +/- 0.0003
[Thu May 17 14:36:44 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:36:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:36:44 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:36:44 2012] Source does appear to be extended
[Thu May 17 14:36:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 15:35:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 15:35:12 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Thu May 17 15:35:12 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.741
[Thu May 17 15:35:12 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 5.41"
[Thu May 17 17:34:55 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src35.ximg exists
[Thu May 17 17:34:55 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu May 17 17:34:55 2012] Fit fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src35 appears to have run properly
[Thu May 17 17:34:56 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu May 17 17:34:56 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May 17 17:34:56 2012] Fit fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu May 17 17:35:18 2012] Spatial fit model total counts = 192.000000, observed total counts = 192.000000
[Thu May 17 17:35:18 2012] Offset between fit and detection position for source 29 = 0.000011 pixels
[Thu May 17 17:35:18 2012] 163.408400 total counts/ 135.301000 bgd. counts: snr = 2.416407
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.000011 pixels
  Position = (242.5, 343.4) = 8 27 12.00 26 39 6.0
  Extent = 5.4 (2.9-8.8)", rotation angle = 0
  Source counts = 28.1 +/- 12.8
  Background counts = 135.3
  Rate = 0.0006 +/- 0.0003
[Thu May 17 17:35:18 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:35:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:35:18 2012] Assessing source extent using major axis lower bound
[Thu May 17 17:35:18 2012] Source does appear to be extended
[Thu May 17 17:35:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 18:24:14 2012] XMMSAS src. selection expression = ellipse(21052.928600, 29824.241600, 324.345609, 324.345609, 0.000000, X, Y)
[Thu May 17 18:24:14 2012] Writing source region out to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src29_src.reg
[Thu May 17 18:24:14 2012] Extracting stamp from image fullrun_mos2_xmm0103260601_pi300-10000_cl_sm2.00.img.gz, (224, 325) - (261, 362)
[Thu May 17 18:24:14 2012] XMMSAS bgd. selection expression = annulus(21052.928600, 29824.241600, 540.576016, 1081.152031, X, Y) && !ellipse(20373.244600, 29883.812200, 299.870409, 299.870409, 0.000000, X, Y)
[Thu May 17 18:24:14 2012] Writing fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src29.gif
[Thu May 17 18:40:56 2012] Mean detx,y = (5049.83, 3266.12) 
[Thu May 17 18:40:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 18:41:13 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 18:41:14 2012] Setting source spectrum file to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu May 17 18:41:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu May 17 19:26:38 2012] Not generating rmf since there are only 28 counts
[Thu May 17 19:26:38 2012] rmf not generated due to insufficient counts
[Thu May 17 19:29:49 2012] Updating aperture counts using extracted products
[Thu May 17 19:29:50 2012] Error reading totcts from fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu May 17 19:29:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 19:29:52 2012] Using photon index=1.80, rate=0.000564, arf fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src29.arf
[Thu May 17 19:29:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 19:29:52 2012] Updating source flux to 9.2e-15
[Thu May 17 19:30:03 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting