[Thu May 17 10:50:15 2012] Detection parameters:
  Position = (175.1, 317.8) = 8 27 33.86 26 37 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 614.5 +/- 29.8
  Background counts = 11.0
  Rate = 0.01 +/- 0.0006

[Thu May 17 10:50:18 2012] Off-axis axis estimate = 9.05'
[Thu May 17 12:23:44 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Thu May 17 12:23:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 12:23:44 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Thu May 17 12:23:44 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.988
[Thu May 17 12:23:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.95"
[Thu May 17 14:36:20 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 14:36:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src1.csv
[Thu May 17 14:36:20 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 14:36:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src1.csv
[Thu May 17 14:36:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 14:36:21 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 14:36:21 2012] Fit fullrun_mos2_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 17 14:36:44 2012] Spatial fit model total counts = 737.000000, observed total counts = 737.000000
[Thu May 17 14:36:44 2012] Offset between fit and detection position for source 1 = 0.187106 pixels
[Thu May 17 14:36:44 2012] 742.388000 total counts/ 290.001000 bgd. counts: snr = 26.565034
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.187106 pixels
  Position = (175.2, 317.7) = 8 27 33.84 26 37 13.9
  Extent = 6.1 (5.7-6.7)", rotation angle = 0
  Source counts = 452.4 +/- 27.2
  Background counts = 290.0
  Rate = 0.009 +/- 0.0005
[Thu May 17 14:36:44 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:36:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:36:44 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:36:44 2012] Source does appear to be extended
[Thu May 17 14:36:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 15:35:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 15:35:12 2012] Initial guess for spatial extent in simple fitting = 6.13"
[Thu May 17 15:35:12 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.097
[Thu May 17 15:35:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.13"
[Thu May 17 17:34:54 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 17:34:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src1.csv
[Thu May 17 17:34:54 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 17:34:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src1.csv
[Thu May 17 17:34:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:34:55 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 17:34:55 2012] fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 17:34:55 2012] Fit fullrun_mos2_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 17 17:35:18 2012] Spatial fit model total counts = 664.998000, observed total counts = 665.000000
[Thu May 17 17:35:18 2012] Offset between fit and detection position for source 1 = 0.032425 pixels
[Thu May 17 17:35:18 2012] 671.327000 total counts/ 241.094000 bgd. counts: snr = 27.708341
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.032425 pixels
  Position = (175.2, 317.6) = 8 27 33.85 26 37 13.8
  Extent = 5.8 (5.3-6.4)", rotation angle = 0
  Source counts = 430.2 +/- 25.9
  Background counts = 241.1
  Rate = 0.009 +/- 0.0005
[Thu May 17 17:35:18 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:35:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:35:18 2012] Assessing source extent using major axis lower bound
[Thu May 17 17:35:18 2012] Source does appear to be extended
[Thu May 17 17:35:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 18:24:13 2012] XMMSAS src. selection expression = ellipse(15191.442720, 27586.891400, 345.567010, 345.567010, 0.000000, X, Y)
[Thu May 17 18:24:13 2012] Writing source region out to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1_src.reg
[Thu May 17 18:24:13 2012] Extracting stamp from image fullrun_mos2_xmm0103260601_pi300-10000_cl_sm2.00.img.gz, (155, 298) - (195, 338)
[Thu May 17 18:24:13 2012] XMMSAS bgd. selection expression = annulus(15191.442720, 27586.891400, 575.945017, 1151.890033, X, Y)
[Thu May 17 18:24:13 2012] Writing fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1.gif
[Thu May 17 18:24:19 2012] Mean detx,y = (11260.36, 2420.83) 
[Thu May 17 18:24:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 18:24:36 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 18:24:36 2012] Setting source spectrum file to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 18:24:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 17 19:29:48 2012] Updating aperture counts using extracted products
[Thu May 17 19:29:48 2012] Error reading totcts from fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 19:29:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 19:29:50 2012] Using photon index=1.80, rate=0.00863, arf fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1.arf
[Thu May 17 19:29:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 19:29:50 2012] Updating source flux to 2.4e-13
[Thu May 17 19:31:18 2012] Reading fit data from xmm0103260601/analysis//spectral/fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 17 19:31:18 2012] Spectral fit parameter nH value = 1.68736e+20
[Thu May 17 19:31:18 2012] Spectral fit parameter PhoIndex value = 1.79972
[Thu May 17 19:31:18 2012] Failed to get F(0.3-8.0) from xmm0103260601/analysis//spectral/fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 17 19:31:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 19:31:18 2012] Using Nh = 1.7e+20, photon index=1.80, rate=0.00863, arf fullrun_mos2_xmm0103260601_pi300-10000_pass1_cl_src1.arf
[Thu May 17 19:31:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 19:31:18 2012] Updating source flux to 2.5e-13