[Thu May 17 10:49:21 2012] Detection parameters:
  Position = (346.2, 365.6) = 8 26 38.34 26 40 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 8.5
  Background counts = 5.9
  Rate = 0.002 +/- 0.0005

[Thu May 17 10:49:21 2012] Off-axis axis estimate = 5.98'
[Thu May 17 11:31:44 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:31:44 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Thu May 17 11:31:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.810
[Thu May 17 11:31:44 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.42"
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 17 12:23:44 2012] Fit fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 17 12:23:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 17 12:23:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 17 12:23:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:36:31 2012] Spatial fit model total counts = 85.708000, observed total counts = 81.000000
[Thu May 17 14:36:31 2012] Offset between fit and detection position for source 15 = 0.875329 pixels
[Thu May 17 14:36:31 2012] 85.197400 total counts/ 40.523500 bgd. counts: snr = 7.017790
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.875329 pixels
  Position = (345.8, 366.4) = 8 26 38.47 26 40 46.1
  Extent = 9.6" x 9.6", rotation angle = 0
  Source counts = 44.7 +/- 9.2
  Background counts = 40.5
  Rate = 0.002 +/- 0.0005
[Thu May 17 14:36:31 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:36:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:36:31 2012] Assessing source extent using major
[Thu May 17 14:36:31 2012] Source does appear to be extended
[Thu May 17 14:36:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:47:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 14:47:49 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Thu May 17 14:47:49 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.023
[Thu May 17 14:47:49 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.61"
[Thu May 17 15:35:10 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src15.ximg exists
[Thu May 17 15:35:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src15.csv
[Thu May 17 15:35:10 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu May 17 15:35:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src15.csv
[Thu May 17 15:35:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 15:35:12 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu May 17 15:35:12 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May 17 15:35:12 2012] Fit fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu May 17 17:35:05 2012] Spatial fit model total counts = 84.919500, observed total counts = 81.000000
[Thu May 17 17:35:05 2012] Offset between fit and detection position for source 15 = 0.827535 pixels
[Thu May 17 17:35:05 2012] 84.576300 total counts/ 51.153600 bgd. counts: snr = 4.673082
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.827535 pixels
  Position = (345.5, 365.6) = 8 26 38.59 26 40 42.9
  Extent = 7.1 (5.2-10.3)", rotation angle = 0
  Source counts = 33.4 +/- 9.2
  Background counts = 51.2
  Rate = 0.002 +/- 0.0005
[Thu May 17 17:35:05 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:35:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:35:05 2012] Assessing source extent using major axis lower bound
[Thu May 17 17:35:05 2012] Source does appear to be extended
[Thu May 17 17:35:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 18:06:57 2012] XMMSAS src. selection expression = ellipse(30008.428600, 31761.742200, 427.138812, 427.138812, 0.000000, X, Y)
[Thu May 17 18:06:57 2012] Writing source region out to fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src15_src.reg
[Thu May 17 18:06:57 2012] Extracting stamp from image fullrun_mos1_xmm0103260601_pi300-10000_cl_sm2.00.img.gz, (321, 341) - (370, 390)
[Thu May 17 18:06:57 2012] XMMSAS bgd. selection expression = annulus(30008.428600, 31761.742200, 711.898020, 1423.796041, X, Y)
[Thu May 17 18:06:57 2012] Writing fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src15.gif
[Thu May 17 18:13:57 2012] Mean detx,y = (3359.59, 3962.37) 
[Thu May 17 18:13:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 18:14:17 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 18:14:18 2012] Setting source spectrum file to fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 17 18:14:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu May 17 18:23:34 2012] Not generating rmf since there are only 33 counts
[Thu May 17 18:23:34 2012] rmf not generated due to insufficient counts
[Thu May 17 19:29:46 2012] Updating aperture counts using extracted products
[Thu May 17 19:29:47 2012] Error reading totcts from fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May 17 19:29:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 19:29:48 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src15.arf
[Thu May 17 19:29:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 19:29:48 2012] Updating source flux to 2.2e-14
[Thu May 17 19:29:54 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting