[Thu May 17 10:49:21 2012] Detection parameters:
  Position = (415.6, 386.2) = 8 26 15.84 26 42 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.7 +/- 7.3
  Background counts = 5.1
  Rate = 0.003 +/- 0.0007

[Thu May 17 10:49:21 2012] Off-axis axis estimate = 10.61'
[Thu May 17 11:31:44 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:31:44 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Thu May 17 11:31:44 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.027
[Thu May 17 11:31:44 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.73"
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 17 12:23:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src11.csv
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 17 12:23:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src11.csv
[Thu May 17 12:23:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 17 12:23:44 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 17 12:23:44 2012] Fit fullrun_mos1_xmm0103260601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 17 14:36:31 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.044737 pixels away
[Thu May 17 14:36:31 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:36:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:36:31 2012] Assessing source extent using major
[Thu May 17 14:36:31 2012] Source does appear to be extended
[Thu May 17 14:36:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:47:49 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Thu May 17 14:47:49 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Thu May 17 14:47:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.027
[Thu May 17 14:47:49 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.73"
[Thu May 17 15:35:10 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 17 15:35:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src11.csv
[Thu May 17 15:35:10 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 17 15:35:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src11.csv
[Thu May 17 15:35:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 15:35:10 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 17 15:35:12 2012] fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 17 15:35:12 2012] Fit fullrun_mos1_xmm0103260601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May 17 17:35:05 2012] Source 13 is offset by 2.893423 and -4.422312 pixels which is larger than
2 X fitted extent = 0.792110 x 0.792110, not incorporating fit results
[Thu May 17 17:35:05 2012] Spatial fit model total counts = 97.222800, observed total counts = 88.000000
[Thu May 17 17:35:05 2012] Offset between fit and detection position for source 13 = 0.933575 pixels
[Thu May 17 17:35:05 2012] 101.162700 total counts/ 73.355300 bgd. counts: snr = 3.246718
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.933575 pixels
  Position = (414.6, 386.3) = 8 26 16.14 26 42 12.6
  Extent = 4.7" x 4.7", rotation angle = 0
  Source counts = 27.8 +/- 10.1
  Background counts = 73.4
  Rate = 0.002 +/- 0.0005
[Thu May 17 17:35:05 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:35:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:35:05 2012] Assessing source extent using major
[Thu May 17 17:35:05 2012] Source does appear to be extended
[Thu May 17 17:35:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 18:06:57 2012] XMMSAS src. selection expression = ellipse(36023.977200, 33561.170800, 281.694608, 281.694608, 0.000000, X, Y)
[Thu May 17 18:06:57 2012] Writing source region out to fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src13_src.reg
[Thu May 17 18:06:57 2012] Extracting stamp from image fullrun_mos1_xmm0103260601_pi300-10000_cl_sm2.00.img.gz, (398, 370) - (431, 403)
[Thu May 17 18:06:57 2012] XMMSAS bgd. selection expression = annulus(36023.977200, 33561.170800, 469.491014, 938.982027, X, Y) && !ellipse(36466.266880, 34468.359800, 551.308016, 551.308016, 0.000000, X, Y)
[Thu May 17 18:06:57 2012] Writing fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src13.gif
[Thu May 17 18:12:03 2012] Mean detx,y = (3696.88, 10233.36) 
[Thu May 17 18:12:05 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 18:12:18 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 18:12:18 2012] Setting source spectrum file to fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu May 17 18:12:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu May 17 18:23:06 2012] Not generating rmf since there are only 27 counts
[Thu May 17 18:23:06 2012] rmf not generated due to insufficient counts
[Thu May 17 19:29:46 2012] Updating aperture counts using extracted products
[Thu May 17 19:29:46 2012] Error reading totcts from fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu May 17 19:29:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 19:29:47 2012] Using photon index=1.80, rate=0.00152, arf fullrun_mos1_xmm0103260601_pi300-10000_pass1_cl_src13.arf
[Thu May 17 19:29:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 19:29:47 2012] Updating source flux to 2.9e-14
[Thu May 17 19:29:54 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Thu May 17 19:29:54 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting