[Fri May 31 00:40:24 2013] Detection parameters:
  Position = (418.3, 283.0) = 6 30 55.65 10 34 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 8.6
  Background counts = 4.2
  Rate = 0.008 +/- 0.002

[Fri May 31 00:40:28 2013] Off-axis axis estimate = 8.76'
[Fri May 31 00:40:54 2013] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Fri May 31 00:40:54 2013] Initial guess for spatial extent in simple fitting = 10.81"
[Fri May 31 00:40:54 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Fri May 31 00:40:54 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.81"
[Fri May 31 00:40:55 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_src4.ximg exists
[Fri May 31 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_src4.csv
[Fri May 31 00:40:55 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May 31 00:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_src4.csv
[Fri May 31 00:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 00:40:55 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May 31 00:40:55 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 31 00:40:55 2013] Fit fullrun_mos1_xmm0103260401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri May 31 00:41:06 2013] Spatial fit model total counts = 65.995600, observed total counts = 66.000000
[Fri May 31 00:41:06 2013] Offset between fit and detection position for source 3 = 0.586948 pixels
[Fri May 31 00:41:06 2013] 65.697500 total counts/ 27.702700 bgd. counts: snr = 7.218768
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.586948 pixels
  Position = (418.0, 282.5) = 6 30 55.75 10 34 17.3
  Extent = 7.7 (5.0-12.1)", rotation angle = 0
  Source counts = 38.0 +/- 8.1
  Background counts = 27.7
  Rate = 0.005 +/- 0.001
[Fri May 31 00:41:06 2013] Vigneting correction estimate = 1.000000
[Fri May 31 00:41:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 00:41:06 2013] Assessing source extent using major axis lower bound
[Fri May 31 00:41:06 2013] Source does appear to be extended
[Fri May 31 00:41:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 00:41:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 00:41:20 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Fri May 31 00:41:20 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970
[Fri May 31 00:41:20 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.70"
[Fri May 31 00:41:21 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_src4.ximg exists
[Fri May 31 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_src4.csv
[Fri May 31 00:41:21 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May 31 00:41:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_src4.csv
[Fri May 31 00:41:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 00:41:21 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May 31 00:41:21 2013] fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 31 00:41:21 2013] Fit fullrun_mos1_xmm0103260401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri May 31 00:41:32 2013] Warning, spatial fit 4 centroid is now closest to src. 12
[Fri May 31 00:41:32 2013] Vigneting correction estimate = 1.000000
[Fri May 31 00:41:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 00:41:32 2013] Assessing source extent using major axis lower bound
[Fri May 31 00:41:32 2013] Source does appear to be extended
[Fri May 31 00:41:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 00:41:53 2013] XMMSAS src. selection expression = ellipse(36318.004384, 24531.918000, 461.934613, 461.934613, 0.000000, X, Y)
[Fri May 31 00:41:53 2013] Not overwriting source region fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3_src.reg
[Fri May 31 00:41:53 2013] Extracting stamp from image fullrun_mos1_xmm0103260401_pi300-10000_cl_sm2.00.img.gz, (391, 256) - (445, 309)
[Fri May 31 00:41:53 2013] XMMSAS bgd. selection expression = annulus(36318.004384, 24531.918000, 769.891022, 1539.782044, X, Y) && !ellipse(36894.799600, 26014.804400, 329.311209, 329.311209, 0.000000, X, Y)
[Fri May 31 00:41:53 2013] Writing fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3.gif
[Fri May 31 00:42:21 2013] Mean detx,y = (-3985.96, 8805.15) 
[Fri May 31 00:42:23 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 00:42:38 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 00:42:38 2013] Setting source spectrum file to fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 31 00:42:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 31 00:46:12 2013] Not generating rmf since there are only 37 counts
[Fri May 31 00:46:12 2013] rmf not generated due to insufficient counts
[Fri May 31 00:57:32 2013] Updating aperture counts using extracted products
[Fri May 31 00:57:32 2013] Total counts from fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 48.00
[Fri May 31 00:57:33 2013] Total counts from fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 105.00
[Fri May 31 00:57:33 2013] Got source and background scale factors 675200.000000, 5210168.000000
[Fri May 31 00:57:33 2013] User source parameters:
  Position = (418.0, 282.5) = 6 30 55.75 10 34 17.3
  Extent = 7.7 (5.0-12.1)", rotation angle = 0
  Source aperture counts = 34.4 +/- 8.0
  Background aperture counts = 13.6
  Rate = 0.004 +/- 0.001

[Fri May 31 00:57:35 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 00:57:35 2013] Using photon index=1.80, rate=0.00461, arf fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3.arf
[Fri May 31 00:57:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 00:57:35 2013] Updating source flux to 9.9e-14
[Fri May 31 00:57:41 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 31 00:57:42 2013] xmm0103260401/analysis//spectral/fullrun_mos1_xmm0103260401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete