[Thu Jun  7 23:38:29 2012] Detection parameters:
  Position = (384.8, 431.4) = 14 44 27.13 29 27 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.8 +/- 14.1
  Background counts = 31.9
  Rate = 0.002 +/- 0.0004

[Thu Jun  7 23:38:30 2012] Off-axis axis estimate = 11.49'
[Fri Jun  8 00:40:36 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:40:36 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Fri Jun  8 00:40:36 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.126
[Fri Jun  8 00:40:36 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.18"
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun  8 01:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src15.csv
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun  8 01:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src15.csv
[Fri Jun  8 01:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun  8 01:13:24 2012] Fit fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jun  8 01:13:39 2012] Spatial fit model total counts = 309.700000, observed total counts = 310.000000
[Fri Jun  8 01:13:39 2012] Offset between fit and detection position for source 4 = 0.237844 pixels
[Fri Jun  8 01:13:39 2012] 311.738800 total counts/ 263.193000 bgd. counts: snr = 2.992365
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.237844 pixels
  Position = (384.6, 431.4) = 14 44 27.21 29 27 6.9
  Extent = 4.6 (3.5-6.1)", rotation angle = 0
  Source counts = 48.5 +/- 17.7
  Background counts = 263.2
  Rate = 0.001 +/- 0.0005
[Fri Jun  8 01:13:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:13:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:13:39 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 01:13:39 2012] Source does appear to be extended
[Fri Jun  8 01:13:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 02:07:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 02:07:53 2012] Initial guess for spatial extent in simple fitting = 4.61"
[Fri Jun  8 02:07:53 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.926
[Fri Jun  8 02:07:53 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 4.61"
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jun  8 02:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src15.csv
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jun  8 02:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src15.csv
[Fri Jun  8 02:41:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 02:41:58 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jun  8 02:41:58 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jun  8 02:41:58 2012] Fit fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Jun  8 02:42:10 2012] Spatial fit model total counts = 280.966000, observed total counts = 282.000000
[Fri Jun  8 02:42:10 2012] Offset between fit and detection position for source 4 = 0.023134 pixels
[Fri Jun  8 02:42:10 2012] 283.337200 total counts/ 234.953000 bgd. counts: snr = 3.156553
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.023134 pixels
  Position = (384.6, 431.4) = 14 44 27.20 29 27 7.0
  Extent = 4.8 (3.5-6.0)", rotation angle = 0
  Source counts = 48.4 +/- 16.8
  Background counts = 235.0
  Rate = 0.001 +/- 0.0005
[Fri Jun  8 02:42:11 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 02:42:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 02:42:11 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 02:42:11 2012] Source does appear to be extended
[Fri Jun  8 02:42:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:38:43 2012] XMMSAS src. selection expression = ellipse(33409.714000, 37482.642800, 287.568608, 287.568608, 0.000000, X, Y)
[Fri Jun  8 03:38:43 2012] Writing source region out to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  8 03:38:43 2012] Extracting stamp from image fullrun_mos2_xmm0103060201_pi300-10000_cl_sm2.00.img.gz, (368, 415) - (401, 448)
[Fri Jun  8 03:38:43 2012] XMMSAS bgd. selection expression = annulus(33409.714000, 37482.642800, 479.281014, 958.562028, X, Y) && !ellipse(33098.311493, 39181.711090, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  8 03:38:43 2012] Writing fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src4.gif
[Fri Jun  8 03:42:21 2012] Mean detx,y = (-9164.83, 7469.22) 
[Fri Jun  8 03:42:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:42:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:42:32 2012] Setting source spectrum file to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  8 03:42:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  8 03:52:51 2012] Not generating rmf since there are only 48 counts
[Fri Jun  8 03:52:51 2012] rmf not generated due to insufficient counts
[Fri Jun  8 03:54:40 2012] Updating aperture counts using extracted products
[Fri Jun  8 03:54:40 2012] Error reading totcts from fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  8 03:54:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 03:54:41 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src4.arf
[Fri Jun  8 03:54:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 03:54:41 2012] Updating source flux to 4.2e-14
[Fri Jun  8 03:55:03 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting