[Thu Jun  7 23:38:30 2012] Detection parameters:
  Position = (490.3, 300.0) = 14 43 52.10 29 17 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.4 +/- 12.8
  Background counts = 29.4
  Rate = 0.002 +/- 0.0003

[Thu Jun  7 23:38:30 2012] Off-axis axis estimate = 13.91'
[Fri Jun  8 00:40:36 2012] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:40:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 00:40:36 2012] Initial guess for spatial extent in simple fitting = 13.38"
[Fri Jun  8 00:40:36 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.094
[Fri Jun  8 00:40:36 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.38"
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun  8 01:13:24 2012] Fit fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src21 appears to have run properly
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun  8 01:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun  8 01:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Jun  8 01:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:13:39 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.597622 pixels away
[Fri Jun  8 01:13:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:13:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:13:39 2012] Assessing source extent using major
[Fri Jun  8 01:13:39 2012] Source does appear to be extended
[Fri Jun  8 01:13:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 02:07:53 2012] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 02:07:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 02:07:53 2012] Initial guess for spatial extent in simple fitting = 13.38"
[Fri Jun  8 02:07:53 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.094
[Fri Jun  8 02:07:53 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 13.38"
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src21.ximg exists
[Fri Jun  8 02:41:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src21.csv
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Jun  8 02:41:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src21.csv
[Fri Jun  8 02:41:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 02:41:58 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Jun  8 02:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Jun  8 02:41:58 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Jun  8 02:41:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Jun  8 02:41:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 02:42:11 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 16.646901 pixels away
[Fri Jun  8 02:42:11 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 02:42:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 02:42:11 2012] Assessing source extent using major
[Fri Jun  8 02:42:11 2012] Source does appear to be extended
[Fri Jun  8 02:42:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:38:43 2012] XMMSAS src. selection expression = ellipse(42604.989044, 26052.296509, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  8 03:38:43 2012] Writing source region out to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src18_src.reg
[Fri Jun  8 03:38:43 2012] Extracting stamp from image fullrun_mos2_xmm0103060201_pi300-10000_cl_sm2.00.img.gz, (453, 263) - (528, 338)
[Fri Jun  8 03:38:43 2012] XMMSAS bgd. selection expression = annulus(42604.989044, 26052.296509, 1087.500000, 2175.000000, X, Y)
[Fri Jun  8 03:38:43 2012] Writing fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src18.gif
[Fri Jun  8 03:43:39 2012] Mean detx,y = (-14892.26, -6013.24) 
[Fri Jun  8 03:43:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:43:51 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:43:52 2012] Setting source spectrum file to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun  8 03:43:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Jun  8 03:53:20 2012] Not generating rmf since there are only 63 counts
[Fri Jun  8 03:53:20 2012] rmf not generated due to insufficient counts
[Fri Jun  8 03:54:40 2012] Updating aperture counts using extracted products
[Fri Jun  8 03:54:40 2012] Error reading totcts from fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun  8 03:54:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 03:54:41 2012] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src18.arf
[Fri Jun  8 03:54:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 03:54:41 2012] Updating source flux to 3.9e-14
[Fri Jun  8 03:55:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting