[Thu Jun  7 23:38:29 2012] Detection parameters:
  Position = (453.2, 252.9) = 14 44 4.45 29 14 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1446.1 +/- 45.7
  Background counts = 29.6
  Rate = 0.04 +/- 0.001

[Thu Jun  7 23:38:30 2012] Off-axis axis estimate = 11.70'
[Fri Jun  8 00:40:36 2012] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:40:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 00:40:36 2012] Initial guess for spatial extent in simple fitting = 12.28"
[Fri Jun  8 00:40:36 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.951
[Fri Jun  8 00:40:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.28"
[Fri Jun  8 01:13:23 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  8 01:13:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 01:13:23 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  8 01:13:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 01:13:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  8 01:13:24 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  8 01:13:24 2012] Fit fullrun_mos2_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  8 01:13:39 2012] Spatial fit model total counts = 1643.000000, observed total counts = 1643.000000
[Fri Jun  8 01:13:39 2012] Offset between fit and detection position for source 1 = 0.311070 pixels
[Fri Jun  8 01:13:39 2012] 1544.317000 total counts/ 588.413000 bgd. counts: snr = 39.406980
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.311070 pixels
  Position = (452.9, 252.9) = 14 44 4.56 29 14 10.2
  Extent = 6.3 (5.9-6.7)", rotation angle = 0
  Source counts = 955.9 +/- 39.3
  Background counts = 588.4
  Rate = 0.03 +/- 0.001
[Fri Jun  8 01:13:39 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:13:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:13:39 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 01:13:39 2012] Source does appear to be extended
[Fri Jun  8 01:13:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 02:07:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 02:07:53 2012] Initial guess for spatial extent in simple fitting = 6.28"
[Fri Jun  8 02:07:53 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.059
[Fri Jun  8 02:07:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.28"
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  8 02:41:57 2012] Fit fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  8 02:41:57 2012] fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  8 02:41:57 2012] Fit fullrun_mos2_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  8 02:42:10 2012] Spatial fit model total counts = 1387.850000, observed total counts = 1388.000000
[Fri Jun  8 02:42:10 2012] Offset between fit and detection position for source 1 = 0.111587 pixels
[Fri Jun  8 02:42:10 2012] 1380.863000 total counts/ 487.015000 bgd. counts: snr = 40.503495
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.111587 pixels
  Position = (453.0, 253.0) = 14 44 4.54 29 14 10.7
  Extent = 7.5" x 3.9", rotation angle = 116
  Source counts = 893.8 +/- 37.2
  Background counts = 487.0
  Rate = 0.03 +/- 0.001
[Fri Jun  8 02:42:11 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 02:42:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 02:42:11 2012] Assessing source extent using major
[Fri Jun  8 02:42:11 2012] Source does appear to be extended
[Fri Jun  8 02:42:11 2012] Computing asymmetry using major and minor axis, asym = 1.91
[Fri Jun  8 02:42:11 2012] Source is asymmetric
[Fri Jun  8 03:38:43 2012] XMMSAS src. selection expression = ellipse(39358.248160, 21964.901200, 452.152213, 236.846407, 115.658118, X, Y)
[Fri Jun  8 03:38:43 2012] Writing source region out to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  8 03:38:43 2012] Extracting stamp from image fullrun_mos2_xmm0103060201_pi300-10000_cl_sm2.00.img.gz, (427, 227) - (479, 279)
[Fri Jun  8 03:38:43 2012] XMMSAS bgd. selection expression = annulus(39358.248160, 21964.901200, 753.587022, 1507.174043, X, Y) && !ellipse(37589.636047, 23028.650909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39665.815857, 21372.034760, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  8 03:38:43 2012] Writing fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1.gif
[Fri Jun  8 03:38:46 2012] Mean detx,y = (-10678.75, -9078.43) 
[Fri Jun  8 03:38:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:38:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:38:55 2012] Setting source spectrum file to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 03:38:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  8 03:54:40 2012] Updating aperture counts using extracted products
[Fri Jun  8 03:54:40 2012] Error reading totcts from fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  8 03:54:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 03:54:40 2012] Using photon index=1.80, rate=0.0257, arf fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 03:54:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 03:54:40 2012] Updating source flux to 6.3e-13
[Fri Jun  8 03:55:15 2012] Reading fit data from xmm0103060201/analysis//spectral/fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  8 03:55:15 2012] Spectral fit parameter nH value = 5.02164e+19
[Fri Jun  8 03:55:15 2012] Spectral fit parameter PhoIndex value = 2.44235
[Fri Jun  8 03:55:15 2012] Failed to get F(0.3-8.0) from xmm0103060201/analysis//spectral/fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 03:55:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 03:55:15 2012] Using Nh = 5e+19, photon index=2.44, rate=0.0257, arf fullrun_mos2_xmm0103060201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  8 03:55:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 03:55:15 2012] Updating source flux to 5e-13