[Thu Jun  7 23:38:07 2012] Detection parameters:
  Position = (353.7, 271.0) = 14 44 37.51 29 15 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 13.3
  Background counts = 37.1
  Rate = 0.002 +/- 0.0004

[Thu Jun  7 23:38:07 2012] Off-axis axis estimate = 4.48'
[Fri Jun  8 00:09:33 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 00:09:33 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Fri Jun  8 00:09:33 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Fri Jun  8 00:09:33 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.67"
[Fri Jun  8 00:40:36 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jun  8 00:40:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src17.csv
[Fri Jun  8 00:40:36 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jun  8 00:40:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src17.csv
[Fri Jun  8 00:40:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 00:40:36 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun  8 00:40:36 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun  8 00:40:36 2012] Fit fullrun_mos1_xmm0103060201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Jun  8 01:13:34 2012] Spatial fit model total counts = 261.612000, observed total counts = 264.000000
[Fri Jun  8 01:13:34 2012] Offset between fit and detection position for source 22 = 0.485624 pixels
[Fri Jun  8 01:13:34 2012] 261.130600 total counts/ 220.671000 bgd. counts: snr = 2.723635
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.485624 pixels
  Position = (354.0, 271.3) = 14 44 37.41 29 15 30.8
  Extent = 4.2 (2.9-6.0)", rotation angle = 0
  Source counts = 40.5 +/- 16.2
  Background counts = 220.7
  Rate = 0.001 +/- 0.0005
[Fri Jun  8 01:13:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 01:13:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 01:13:34 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 01:13:34 2012] Source does appear to be extended
[Fri Jun  8 01:13:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 01:37:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  8 01:37:53 2012] Initial guess for spatial extent in simple fitting = 4.23"
[Fri Jun  8 01:37:53 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.037
[Fri Jun  8 01:37:53 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 4.23"
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun  8 02:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src17.csv
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun  8 02:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src17.csv
[Fri Jun  8 02:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun  8 02:07:52 2012] fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun  8 02:07:52 2012] Fit fullrun_mos1_xmm0103060201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun  8 02:42:08 2012] Spatial fit model total counts = 255.467000, observed total counts = 257.000000
[Fri Jun  8 02:42:08 2012] Offset between fit and detection position for source 22 = 0.007411 pixels
[Fri Jun  8 02:42:08 2012] 253.668900 total counts/ 212.614000 bgd. counts: snr = 2.815588
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.007411 pixels
  Position = (354.0, 271.3) = 14 44 37.41 29 15 30.8
  Extent = 4.3 (2.9-6.0)", rotation angle = 0
  Source counts = 41.1 +/- 15.9
  Background counts = 212.6
  Rate = 0.001 +/- 0.0005
[Fri Jun  8 02:42:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun  8 02:42:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  8 02:42:08 2012] Assessing source extent using major axis lower bound
[Fri Jun  8 02:42:08 2012] Source does appear to be extended
[Fri Jun  8 02:42:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  8 03:18:27 2012] XMMSAS src. selection expression = ellipse(30752.639920, 23557.873200, 256.736407, 256.736407, 0.000000, X, Y)
[Fri Jun  8 03:18:27 2012] Writing source region out to fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src22_src.reg
[Fri Jun  8 03:18:27 2012] Extracting stamp from image fullrun_mos1_xmm0103060201_pi300-10000_cl_sm2.00.img.gz, (339, 257) - (369, 286)
[Fri Jun  8 03:18:27 2012] XMMSAS bgd. selection expression = annulus(30752.639920, 23557.873200, 427.894012, 855.788025, X, Y)
[Fri Jun  8 03:18:27 2012] Writing fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src22.gif
[Fri Jun  8 03:22:34 2012] Mean detx,y = (-5024.92, 2624.20) 
[Fri Jun  8 03:22:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  8 03:22:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  8 03:22:43 2012] Setting source spectrum file to fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jun  8 03:22:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Jun  8 03:37:41 2012] Not generating rmf since there are only 41 counts
[Fri Jun  8 03:37:41 2012] rmf not generated due to insufficient counts
[Fri Jun  8 03:54:39 2012] Updating aperture counts using extracted products
[Fri Jun  8 03:54:39 2012] Error reading totcts from fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jun  8 03:54:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 03:54:40 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos1_xmm0103060201_pi300-10000_pass1_cl_src22.arf
[Fri Jun  8 03:54:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 03:54:40 2012] Updating source flux to 1.7e-14
[Fri Jun  8 03:54:42 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting